NautemyCoC orals · exams · job testsEarly access
Exam guide21 min readJump to 5 questions

CoC sea time requirements in India: how much you need and how the MMD counts it

CoC sea time requirements in India: MEO Class 4 needs 6 months in a TAR book (4 propelling), Class 2 needs 12 months after Class 4, and Class 1 needs 36 months from Class 4 (30 with 12 months as second engineer). NCV service counts at two-thirds.

On this page
  1. Key facts
  2. How much sea time do you need for each Indian CoC?
  3. What is the sea time for the engine ladder, step by step?
  4. What counts as qualifying sea service?
  5. How is service on OSVs, dredgers, harbour craft and small ships counted?
  6. What is propelling time and why do applications fail on it?
  7. Worked examples: does your sea time qualify?
  8. Worked deck examples: how do you add up sea time for Second Mate, Chief Mate and Master?
  9. Does old sea time still count?
  10. How does the five-year recency rule work with real dates?
  11. How do you prove your sea time to the MMD?
  12. How does the exam portal read your sea time?
  13. What are the most common sea-time mistakes?
  14. What should you do if the MMD says you are short of sea time?
  15. What sea time do the new 2026 routes require?
  16. How does sea time move you up the Indian CoC ladder?
  17. How do you plan contracts to reach the next CoC without wasting months?
  18. Will the oral examiner ask about your sea service?
  19. What changed in sea-time rules in 2025 and 2026?
  20. What should you do once your sea time is complete?
  21. 5 practice questions
  22. Frequently asked questions
  23. Sources

Key facts

MEO Class IV
6 months, 4 propelling (motor or steam)[1]
MEO Class II
12 months after Class IV, 8 propelling[2]
MEO Class I
36 months after Class IV; 30 with 12 months as 2/E[3]
ETO
12 months workshop + sea, 6 months at sea minimum[4]
Second Mate (FG)
12 months incl. 6 months bridge watchkeeping[5]
NCV service
Counts at 2/3 for non-NCV CoCs; not for MEO Class I[6]
Recency
6 months within the last 5 years[7]
Source
MS (STCW) Rules 2014 and TEAP manual Part A[8]

Checked 14 November 2026. Fees and rules change: confirm with the authority before you book.

How much sea time do you need for each Indian CoC?

Each Indian CoC has a minimum period of approved sea service set by the Merchant Shipping (STCW) Rules 2014 and explained in the TEAP manual Part A. For engineers there are two numbers: total qualifying service and propelling time (watchkeeping on the main propulsion machinery or UMS duties). For deck officers the second number is bridge watchkeeping.

The main figures are below. Every figure is a minimum; the MMD examiner checks your documents and can refuse service that is not properly recorded. Use our sea time calculator to add up contracts and the CoC pathway finder to see your next step.

Minimum sea service for Indian CoCs
CertificateMinimum sea serviceOf whichSource
MEO Class IV (motor or steam)6 months, recorded in a TAR book4 months propelling[1]
MEO Class IV (combined motor and steam)8 months (4 motor + 4 steam)6 months propelling (3 + 3)[1]
MEO Class II12 months after Class IV as AEO or OICEW, ships of 750 kW+8 months propelling[2]
MEO Class I36 months after Class IV, including 12 after Class II30 months if 12 months as second engineer (3000 kW+)[3]
ETO12 months combined workshop and sea serviceAt least 6 months at sea in a training record book[4]
MEO Class IV (NCV)6 months on 750-3000 kW4 months propelling[9]
Second Mate (FG)12 months6 months bridge watchkeeping[5]
Chief Mate (FG)18 months as watchkeeping officer after Second Mate-[5]
Master (FG)3 years as OOW after Chief Mate30 months if 1 year as Chief Mate[5]
NWKO (NCV)18 months (or 3 years on a training route)6 months bridge watchkeeping[5]

What is the sea time for the engine ladder, step by step?

TEAP Table III/16-1 sets out the engine ladder from Class IV to Class I, separately for motor, steam and combined certificates[1][10]. Column A is total qualifying service; column B is the minimum watchkeeping on main propulsion machinery or UMS duties on ships of 750 kW or more.

The manual adds that the total from Class IV to Class I is 36 months, with at least 12 months after Class IV for the Class II exam and at least 12 months after Class II for Class I; 12 months as second engineer on 3000 kW or more cuts it to 30 months, or pro rata[3]. Detail for each exam is on the MEO Class 4, MEO Class 2 and MEO Class 1 pages.

TEAP Table III/16-1: engine sea time by grade
CertificateCategoryTotal qualifying servicePropelling time
Class IVMotor6 months4 months
Class IVSteam6 months4 months
Class IVCombined8 months (4 M + 4 S)6 months (3 M + 3 S)
Class IVEndorsement (other type)3 months2 months
Class IIMotor or steam12 months after Class IV Part B8 months
Class IICombined16 months (8 M + 8 S)12 months (6 M + 6 S)
Class IIEndorsement6 months4 months
Class IMotor or steam24 months after Class II (18 if 12 months as 2/E)16 months (12 if 12 months as 2/E)
Class ICombined32 months (16 M + 16 S)24 months (12 M + 12 S)
Class IEndorsement9 months6 months

What counts as qualifying sea service?

Qualifying sea service means service on Articles of Agreement as an engineer officer. The examiner checks its length from your CDC, watchkeeping certificates signed by the Master and Chief Engineer, and a letter from the owner or operator[11]. Testimonials must be in the prescribed format, signed by the Chief Engineer and endorsed by the Master or owner's representative[12].

Some service counts in full, some at a reduced rate, and some not at all:

  • UMS ships count in full[13].
  • Auxiliary machinery essential to running the main engine or boilers counts in full, subject to the minimum main-engine and boiler service[14].
  • Long periods not at sea (lay-up, long anchorage): accepted in full only if actual watchkeeping at sea is at least two-thirds of the required period; otherwise you make up the shortfall[7].
  • NCV ships count at two-thirds for non-NCV certificates, and not at all for MEO Class I[6].
  • Lakes, rivers, sheltered waters count at half rate, and not for Class I; non-self-propelled offshore units count at half rate and never as propulsion watchkeeping[15].
  • Service through non-RPSL agencies is not recognised; service with ship owners is accepted with copies of the Articles of Agreement[16].

If your ships had no steam boilers, you also need an approved Boilers and Steam Engineering course[17].

How is service on OSVs, dredgers, harbour craft and small ships counted?

TEAP Table III/16-3 gives the rates for special vessels[18]. Always check the ship's propulsion power on your CDC entry or testimonial, because the power decides the rate.

TEAP Table III/16-3 and related rates
Type of servicePropulsion powerRate
Dredgers on near-coastal voyages750-3000 kWFull
OSV, MSV, supply and support vessels750-3000 kWFull
Ships in rivers, port or harbour limits750-3000 kWHalf
Ships in Indian and foreign watersBelow 750 kWTwo-thirds
Ships on near-coastal voyagesBelow 750 kWHalf
NCV ships, for non-NCV certificatesQualifying powerTwo-thirds; not for MEO Class I[6]
Indian Navy ships (for revalidation by naval officers)AnyHalf[19]

What is propelling time and why do applications fail on it?

Propelling time is the part of your service spent keeping watch on the main propulsion machinery, or doing UMS duties, while the ship is under way on qualifying power. It is column B of Table III/16-1[1]. An engineer who spends a contract mostly on day work, in dry dock or at long anchorages can reach the total months but fall short of propelling time.

The watchkeeping certificate from the Chief Engineer is your main evidence. Ask for it at sign-off, in the prescribed format, with the ship's power, your rank, and the watchkeeping or UMS period clearly stated. For the MEO Class 4 oral exam the TAR book entries must also be complete and signed; an incomplete TAR book is judged on the whole portfolio of evidence, but a badly kept one can be referred to the Examiner of Engineers[20].

Worked examples: does your sea time qualify?

These examples apply the rules above. They are our own worked illustrations; your MMD examiner makes the final decision, so ask before you plan a contract around an edge case.

Worked sea-time examples
Your serviceTargetHow it countsResult
GME graduate: 7 months as junior engineer on a 9000 kW motor bulk carrier, 5 months of it on watch or UMSMEO Class IV (motor)7 months total; 5 months propellingQualifies: 6 and 4 months met[1]
Class IV holder: 6 months on an NCV coaster (2400 kW) + 7 months foreign-going (12000 kW)MEO Class II6 x 2/3 = 4 months + 7 months = 11 monthsShort by 1 month[6]
Class IV holder: 13 months on a UMS container ship, all as 4/E and 3/E on UMS dutyMEO Class II (motor)13 months total, UMS counts in fullQualifies[13]
Class IV holder: 12 months, but 5 months in lay-up with no watchkeeping at seaMEO Class IIActual at-sea watchkeeping 7 months, below 2/3 of 12 (8 months)Make up the shortfall[7]
Class II after 12 months; then 12 months as 2/E on 15000 kW + 6 months as 3/EMEO Class I (motor)30-month route: 12 + 18 after Class IIQualifies[3]
Class II holder: 20 months on an offshore OSV (2800 kW, NCV)MEO Class INCV service not accepted for Class IDoes not count[6]
Class IV holder: 6 months harbour tug (1800 kW) + 9 months foreign-goingMEO Class II6 x 1/2 = 3 + 9 = 12 monthsTotal met; check 8 months propelling[18]
ETO with 26 months as ETO on 750 kW+ shipsMEO Class IV via the 2026 pathway24 months met; then bridging course + 9 months onboard trainingEligible to start[21]

Worked deck examples: how do you add up sea time for Second Mate, Chief Mate and Master?

Count each contract from the sign-on to the sign-off date on your CDC, apply any reduced rate, then check the sub-requirements (bridge watch, tonnage, time after the last CoC). The four cases below use the rules in the MS (STCW) Rules 2014 and the TEAP; they are our illustrations, and the MMD decides your case.

1. Cadet on the training-record-book route (Second Mate FG). Rule 20 asks for 12 months of approved service in a training programme recorded in a Training Record Book, including 6 months of bridge watchkeeping under supervision[22], kept for at least 8 hours in every 24 at sea[23].

Contract Dates Months Bridge watch in TRB
Ship 1 5 Jan 2025 - 4 Jul 2025 6 2 months (rest day work and training)
Ship 2 20 Aug 2025 - 19 Feb 2026 6 4 months, 8 h a day logged
Total 12 6

She qualifies on both counts. With the 4-month Second Mate course (not needed by B.Sc. Nautical Science graduates with 12 months at sea[23]) from March to June 2026, her first realistic written session was July 2026[24].

2. Second Officer heading for Chief Mate. Rule 21 needs 18 months as officer in charge of a navigational watch on ships of 500 GT or more, at least 6 of them on ships of 3000 GT or more[22]. Doubled watches count at two-thirds, and the 6 months on 3000 GT+ must be as an independent watchkeeper[23].

Contract Ship Watch Counted
Mar 2024 - Feb 2025 (12 months) 1,600 GT feeder Own watch 12
Apr 2025 - Sep 2025 (6 months) 30,000 GT bulk carrier Doubled with the C/O 6 x 2/3 = 4
Total 16 months; independent time on 3000 GT+ = 0

He is 2 months short in total and has none of the 6 independent months on a large ship. One more 6-month contract as an independent OOW on a ship of 3000 GT or more fixes both: 16 + 6 = 22 months.

3. Chief Officer heading for Master. Rule 22 needs 36 months as watchkeeping officer on ships of 500 GT or more (18 on 3000 GT+), at least 12 of them after the Chief Mate CoC (6 on 3000 GT+); 36 becomes 30 if 12 months were served as Chief Mate on 3000 GT or more, or pro rata[22].

  • Before the Chief Mate CoC (July 2024): 22 months as OOW, all on ships over 3000 GT.
  • After it: Chief Officer on a 45,000 GT tanker, 1 Sep 2024 - 28 Feb 2025 and 1 May 2025 - 31 Oct 2025 = 6 + 6 = 12 months.
  • Total 22 + 12 = 34 months. Because 12 months were as Chief Mate on 3000 GT+, the target is 30, so she qualifies, with 12 months after the CoC and well over 18 months on large ships.

If only 8 of those 12 months had been as Chief Officer (and 4 as Second Officer), the 30-month reduction would not apply in full. The rule says "or pro rata", so ask your MMD how it will apply before you sign off rather than assume a figure.

4. NWKO (NCV). DG Shipping lists 18 months of approved sea service (or 3 years on a training-programme route) with at least 6 months of bridge watchkeeping[5]. Count it the same way as case 1. NCV exams are then held in Mumbai only[25].

Does old sea time still count?

Yes, but with a recency rule. At least six months of your qualifying service must have been performed within the five years before you apply for the examination[7]. If you have been ashore for years, plan a contract before you apply.

The same idea governs revalidation: to revalidate a CoC on sea service you generally need at least one year in the last five years, or three months in the six months before expiry[26]. See CoC revalidation in India.

How does the five-year recency rule work with real dates?

For engine certificates, at least six months of your qualifying service must fall within the five years before you apply[7]. Count back five years from the application date, not from the exam date.

Example. An MEO Class IV holder sailed from June 2019 to February 2021, then worked ashore. He applies for MEO Class II assessment on 13 November 2026. The five-year window starts on 13 November 2021. None of his sea service falls inside it, so he must sail at least six more qualifying months before the application can succeed, even though his 12 months after Class IV were complete in 2020[2].

If he had served 1 December 2021 to 31 May 2022 instead of ending in February 2021, those six months would sit inside the window and the rule would be met.

Separately, if you do not start exams within one year of an approved assessment, you must apply for re-assessment and pay again[16]; the 2014 schedule fee for each eligibility enquiry is Rs 3,000[22].

How do you prove your sea time to the MMD?

Put together your evidence while you are still on board. Missing testimonials and company letters are the most common reasons applications are put on hold[16]. The full list is in the MMD exam documents checklist.

  1. 1
    Get the CDC entry signed at every sign-on and sign-off

    Upload every stamped CDC page with your application[16].

  2. 2
    Ask for the watchkeeping certificate before you leave

    In the prescribed format, signed by the Chief Engineer and Master, showing ship power, rank and watchkeeping or UMS period[12].

  3. 3
    Get the company letter

    From the RPSL agency or owner, confirming your service dates. Non-RPSL service is not recognised[16].

  4. 4
    Complete the TAR book

    For MEO Class IV, ETO and NCV routes the onboard training must be in an approved TAR book signed by senior engineers[27].

  5. 5
    Check the totals before applying

    Add up totals and propelling time with the sea time calculator, applying the reduced rates.

  6. 6
    Apply for eligibility assessment

    On exams.dgma.gov.in[28]. Answer queries quickly.

How does the exam portal read your sea time?

The e-Examination Portal does not let you type voyages freely: it pulls each voyage from your e-Samudra profile with rank, vessel name and IMO number, type, flag, port of registry, gross tonnage, trade area, service dates, total months and days, propulsion type and propelling days, and watchkeeping nature, and you upload the service certificates and TAR book or CoC against them[29].

That has two practical effects:

  • Errors must be fixed in e-Samudra first. Profile data fetched from e-Samudra cannot be edited on the exam portal[29]; if the sync fails you update e-Samudra and log in again[29].
  • The fields decide the rate. Trade area (NCV or foreign-going), GT, propulsion power, propelling days and watchkeeping nature are exactly what the examiner uses to apply full, two-thirds or half rates[6][15]. A wrong trade area can turn full-rate service into two-thirds.

Examiner's note: Assessment queries usually come from a mismatch, not a shortage: a CDC entry that says "3/O" while the testimonial says "2/O", a sign-off date that differs by a week, or a testimonial without the ship's power. The most common holds on MEO Class IV files are a missing sea service testimonial or company letter, and every stamped CDC page must be uploaded[16]. Check each voyage line on the portal against your CDC before you pay, because the form locks after payment and only a returned query reopens it[29].

What are the most common sea-time mistakes?

  • Counting calendar months, not service days. Sign-on to sign-off dates on the CDC decide your service; leave between contracts does not count.
  • Ignoring propelling time. Totals are met but watchkeeping is short.
  • Mixing rates. Counting NCV or harbour time at full rate.
  • Late paperwork. Trying to get a watchkeeping certificate from a ship you left two years ago.
  • Wrong power. Service on ships below the required power counted as if it qualified.
  • Assuming navy or offshore unit time counts in full. It usually does not[15].

When in doubt, email the Examiner of Engineers at your MMD before you sign the next contract.

What should you do if the MMD says you are short of sea time?

Find out which requirement is short (total, propelling or bridge watch, tonnage, time after the last CoC, or recency), because each has a different fix. The decision table below covers the usual cases.

Short of sea time: decision aid
If the shortfall isThenRule
Total months, by less than one contractSail one more contract on a qualifying ship; do not re-file until it is completeRule 20, 21 or 22[22]
Propelling time (engine) but total metAsk for watchkeeping or UMS duty on the next ship, not day workTable III/16-1 column B[1]
6 months on 3000 GT+ as independent OOW (deck)Next contract must be on a ship of 3000 GT or more with your own watch[23]
Time came from NCV or harbour craftRecount at two-thirds or half; plan foreign-going service[6][18]
Lay-up monthsAt-sea watchkeeping must be at least two-thirds of the requirement[7]
Service through a non-RPSL agencyNot recognised; find service you can prove with Articles of Agreement[16]
Nothing in the last five years (engine)Six months at sea within the five-year window[7]
You think the MMD counted wronglyAppeal to the Director General within 60 days of the orderRule 73[22]

What sea time do the new 2026 routes require?

Three 2026 circulars set sea time for new routes:

  • ETO to MEO Class IV: 24 months as ETO on ships of 750 kW or more, then a three-month bridging course, then 9 months of onboard training and engine-room watchkeeping, reduced to 6 months if you had 36 months as ETO[21][30].
  • NCV engine cadet: 12 months as engine cadet on NCV or coastal ships (6 months for diploma holders), including 6 months watchkeeping[31].
  • Motor or steam endorsement for Class I or II holders: no extra sea time if you complete the approved plant simulator course; otherwise at least one month as assistant engineer on that ship type[32].
  • ETR to ETO: 24 months as ETR (12 months with an electrical diploma or degree) before the ETO course[33].

Details are on the ETO CoC exam and NCV CoC exams pages.

How does sea time move you up the Indian CoC ladder?

Think of the ladder as a chain of sea-time blocks, each opened by passing an exam.

Engine side. After pre-sea training you serve as trainee or junior engineer until you have the 6 months for the MEO Class 4 oral exam. With Class IV you sail as fourth or third engineer; Part A of Class II can be cleared at once, with no sea time[34]. After 12 months you sit Part B of the MEO Class 2 oral exam after the preparatory course. With Class II you sail as third or second engineer and, after the further service, sit the MEO Class 1 oral exam. Electro-technical officers follow the ETO CoC exam route, and coastal engineers the NCV CoC exams. The marine engineer career path article explains the ranks in between.

Deck side. Cadets build 12 months including 6 months of bridge watchkeeping for the second mate oral exam[5], then 18 months as officer of the watch for the chief mate oral exam[5], then 3 years (30 months with a year as chief mate) for the master oral exam[5]. The written side is covered in MMD written exams.

At every step the Mercantile Marine Department checks the evidence before you can book, and MMD exam booking runs on the new portal.

How do you plan contracts to reach the next CoC without wasting months?

Most delays come from contracts that end a few weeks short, or from service that counts at a reduced rate. Plan backwards from the exam month you want.

Contract planning tips
SituationPlanning tipWhy
You need 12 months for Class II and your contract is 6 monthsPlan two contracts back to back on qualifying ships, or one 6-month and one 7-month to allow for short sign-offsContracts often end early; a margin avoids a third contract
You are offered a coastal or harbour jobCount it at the reduced rate before you acceptNCV is 2/3 and harbour service 1/2[6][18]
Your company runs UMS shipsAsk for UMS duty-engineer rotation, not only day workUMS duty counts as propelling time[13]
Your ship will spend months in lay-upAsk to transfer, or plan extra timeAt-sea watchkeeping must be 2/3 of the requirement[7]
You want MEO Class I quicklyAim for 12 months as second engineer on a ship of 3000 kW or moreIt reduces the total from 36 to 30 months[3]
You hold a motor-only certificateIf you plan to sail on steam ships, plan the endorsement earlyEndorsements have their own sea time[10]
You will sit MEO Class IV or ETO for the first time in 2027Book the one-month preparatory course as soon as sea time endsIt is mandatory from 1 January 2027[35]

Will the oral examiner ask about your sea service?

Yes, almost always. Engineering orals often open with your last ship, and the examiner uses your answers to judge whether the service in your testimonials was real watchkeeping. The published guidance tells examiners to refer to the TAR book and competencies during the oral[36].

Before any oral, revise the plant you actually ran: the two-stroke main engine, auxiliary diesel engines, marine boilers, fuel oil purifiers, the fresh water generator, UMS and automation and your engine room watchkeeping routine. The sample questions below show how examiners connect your service to the syllabus. Practise them out loud with the mock oral drill or check yourself with the oral readiness check.

What changed in sea-time rules in 2025 and 2026?

The core sea-time numbers in Table III/16-1 did not change, and 2026 circulars still refer to that table[32]. What changed is the routes around them and how you apply:

  • New routes with their own sea time: ETO to MEO Class IV[21], the NCV engine cadet scheme[31] and the ETR to ETO progression[33].
  • Preparatory course after sea time: first-time MEO Class IV and ETO candidates from 1 January 2027 must finish a one-month course after their sea service and before the exam[35].
  • New portal: sea-time evidence is uploaded on exams.dgma.gov.in for eligibility assessment[28].
  • Foreign certificates under scrutiny: DGS Circular No. 31 of 2025 targeted fraudulent certification, and its addendum asked seafarers holding CoCs from unlisted foreign administrations to submit their training and sea service records through their RPSL agency for verification[37]. Keep your CDC and testimonials complete; they are the proof of your service in any verification.
  • Old website closed: dgshipping.gov.in was discontinued from 31 March 2026; notices are now on dgma.gov.in[38].

What should you do once your sea time is complete?

Apply for eligibility assessment, book the preparatory course where it applies (mandatory for first-time MEO Class IV and ETO candidates from 1 January 2027[35]), and start oral practice. A year after assessment without starting exams means reassessment and a fresh fee[16].

Oral practice

5 oral questions with model answers

Read the question, answer it out loud as if the examiner is across the table, then open the model answer and mark yourself honestly.

–0/5 done
  1. 1
    CoreSTCW Code Table A-III/1

    Tell me about the engine room of your last ship.

    Model answer points
    • Start with the essentials: ship type, main engine make and model, power in kW, fuel types, number of generators and their ratings, boiler type.
    • Say whether it was a UMS ship and what your watch or duty-engineer routine was.
    • Mention one or two jobs you did yourself (a purifier overhaul, a generator decarbonisation).
    • Keep it to about a minute; the examiner will pick a topic from what you say.
    • Only mention machinery you can explain; anything you name may be the next question.
    The examiner may follow up with
    • Draw the fuel oil system of that ship.
    • What alarms did you get most often?
    How did you do?
  2. 2
    CoreSOLAS Ch. II-1 Part E

    What were your duties as duty engineer in UMS mode?

    Model answer points
    • Accept the UMS duty from the previous engineer and test the alarm extension to your cabin and the bridge.
    • Carry out the evening round before UMS: tanks, bilges, leaks, fuel and lube levels, fire hazards, doors and fire flaps.
    • Respond to every alarm, inform the bridge when you enter and leave the engine room, use the dead-man alarm.
    • Do the morning round and hand over.
    • Under SOLAS Ch. II-1 Part E, the alarm system must reach the duty engineer and the bridge.
    The examiner may follow up with
    • What is a dead-man alarm?
    • What would make you keep a manned watch?
    How did you do?
  3. 3
    DeeperTEAP Manual Part A, Section III/16

    Your testimonial shows 6 months on a ship that spent 3 months at anchor. How much of it was propelling time?

    Model answer points
    • Answer honestly with the actual watchkeeping at sea, from the log.
    • Explain that time at anchor or in port without the main engine running is not propelling time.
    • Know that service is accepted in full only if watchkeeping at sea is at least two-thirds of the requirement.
    • The examiner is checking that your testimonial is accurate and that you understand the rule.
    The examiner may follow up with
    • How would you make up a shortfall?
    How did you do?
  4. 4
    CoreMARPOL Annex I Reg. 17; STCW Code Section A-VIII/2

    What entries do you make in the engine-room log during your watch?

    Model answer points
    • Main engine and generator parameters at fixed intervals: pressures, temperatures, rpm, load.
    • Fuel consumption, tank soundings, transfers.
    • Alarms, faults and actions taken; machinery started and stopped.
    • Bridge orders and manoeuvring times.
    • Entries for any pollution-related operation go in the Oil Record Book under MARPOL Annex I Reg. 17.
    The examiner may follow up with
    • Who signs the engine log?
    • What is the difference between the log and the ORB?
    How did you do?
  5. 5
    TrapTEAP Manual Part A, Section III/16

    A friend says you can add a month of leave to your sea time because you were still on the company's books. Is that right?

    Model answer points
    • No. Qualifying sea service is service on Articles of Agreement, verified from the CDC and watchkeeping certificates.
    • Leave and time ashore are not sea service, whatever the company payroll shows.
    • Submitting false service can lead to cancellation of the certificate and action under the rules.
    The examiner may follow up with
    • How does the MMD verify service?
    How did you do?

Reading answers is not the same as saying them. Our AI voice examiner asks these out loud, listens to your answer, asks the follow-up and marks you against the rule. Join early access or try the free timed mock oral drill.

Frequently asked questions

How many months of sea time do I need for MEO Class 4?

Six months of approved service in a TAR book, with four months of watchkeeping on main propulsion or UMS duties for a motor or steam certificate[1]. Compare grades in MEO Class 4 vs Class 2.

What is the sea time for MEO Class 2?

Twelve months after Class IV as assistant engineer or OICEW on ships of 750 kW or more, with eight months propelling[2].

What is the sea time for MEO Class 1?

Thirty-six months after Class IV, including at least 12 after Class II; thirty months if you served 12 months as second engineer on 3000 kW or more[3].

Does NCV sea time count for foreign-going CoCs?

At two-thirds rate for non-NCV certificates, but not for MEO Class I[6].

Does UMS service count as watchkeeping?

Yes. Service on ships whose engines run in periodically unattended mode counts in full[13]. Expect oral questions on your UMS duties; see UMS and automation.

Does time in dry dock count as sea service?

If the ship spent long periods not at sea, your service is accepted in full only if actual watchkeeping at sea is at least two-thirds of the requirement[7].

Does harbour tug service count?

Service on 750-3000 kW ships within river, port or harbour limits counts at half rate[18].

How old can my sea service be?

At least six months must fall within the five years before your application[7].

Is service through a non-RPSL agency accepted?

No. The MMD does not recognise it; service with ship owners is accepted with the Articles of Agreement[16]. Check the agency before you sign; our crewing agency screening page explains what agencies check.

What sea time does a Second Mate need?

Twelve months including six months of bridge watchkeeping[5]. See sea time for second mate.

Can an ETO count ETO service towards MEO Class 4?

Under Circular No. 50 of 2026, 24 months as ETO makes you eligible for the bridging route, after which you need 9 months of onboard engine training (6 with 36 months as ETO)[30].

Does sea service on a foreign-flag ship count for an Indian CoC?

Yes, if it is on Articles of Agreement as an engineer officer on a qualifying ship, verified from your CDC, watchkeeping certificates and the company letter[11], and you joined through an RPS-licensed agency or the owner[16].

Does service as an electrician count towards MEO Class 4?

Only through the 2026 ETO pathway, which needs an Indian ETO CoC and 24 months of ETO service, then the bridging course and onboard training[21]. Service as electrician or electrical officer may count towards the transition requirements if you performed ETO duties and the service is verified[39].

Which document proves propelling time?

The Chief Engineer's watchkeeping certificate in the prescribed format, endorsed by the Master, backed by CDC entries and the company letter[11].

Do doubled watches count in full towards Chief Mate?

No. Service as an assistant watchkeeping officer or on doubled watches counts at two-thirds for Chief Mate and Master, and the 6 months on ships of 3000 GT or more must be as an independent watchkeeper[23]. Six months of doubled watches therefore count as four.

Where does the exam portal get my sea service from?

From your e-Samudra profile. The portal fetches each voyage with ship, GT, trade area, dates and watchkeeping nature, and you upload the certificates against it[29]. Correct mistakes in e-Samudra before you file the assessment.

Sources 39 documents

Each number in the text links to the source below. Labels show the type of source; see our editorial policy.

  1. Official TEAP Manual Part A (Consolidated Rev. 1, 1 May 2015), Chapter III, Section III/16, Table III/16-1 · 1 May 2015
  2. Official TEAP Manual Part A (Consolidated Rev. 1, 1 May 2015), Chapter III, Section III/2 para 2 and Table III/16-1 · 1 May 2015
  3. Official TEAP Manual Part A (Consolidated Rev. 1, 1 May 2015), Chapter III, Section III/3 para 2 and Section III/16 · 1 May 2015
  4. Official TEAP Manual Part A (Consolidated Rev. 1, 1 May 2015), Chapter III, Section III/14 (Rule 48) · 1 May 2015
  5. Official DGMA Nautical Wing: Nautical examinations · 13 November 2026
  6. Official TEAP Manual Part A (Consolidated Rev. 1, 1 May 2015), Chapter III, Section III/16 para 5.3 · 1 May 2015
  7. Official TEAP Manual Part A (Consolidated Rev. 1, 1 May 2015), Chapter III, Section III/16 para 5.1 · 1 May 2015
  8. Official TEAP Manual Part A (Consolidated Rev. 1, 1 May 2015), Chapter III, Tables III/0-1 and III/0-2 · 1 May 2015
  9. Official TEAP Manual Part A (Consolidated Rev. 1, 1 May 2015), Chapter III, Table III/16-2 · 1 May 2015
  10. Official TEAP Manual Part A (Consolidated Rev. 1, 1 May 2015), Chapter III, Table III/16-1 · 1 May 2015
  11. Official TEAP Manual Part A (Consolidated Rev. 1, 1 May 2015), Chapter III, Section III/16 paras 2 and 5.1 · 1 May 2015
  12. Official TEAP Manual Part A (Consolidated Rev. 1, 1 May 2015), Chapter III, Section III/16 paras 1.4-1.5 · 1 May 2015
  13. Official TEAP Manual Part A (Consolidated Rev. 1, 1 May 2015), Chapter III, Section III/16 para 5.9 · 1 May 2015
  14. Official TEAP Manual Part A (Consolidated Rev. 1, 1 May 2015), Chapter III, Section III/16 para 5.2 · 1 May 2015
  15. Official TEAP Manual Part A (Consolidated Rev. 1, 1 May 2015), Chapter III, Section III/16 paras 5.7-5.8 · 1 May 2015
  16. Official DG Shipping Engineering Wing FAQs: E-Governance and E-Pariksha (2024) · 1 January 2024
  17. Official TEAP Manual Part A (Consolidated Rev. 1, 1 May 2015), Chapter III, Section III/16 para 4.1 · 1 May 2015
  18. Official TEAP Manual Part A (Consolidated Rev. 1, 1 May 2015), Chapter III, Table III/16-3 · 1 May 2015
  19. Official TEAP Manual Part A (Consolidated Rev. 1, 1 May 2015), Chapter III, Section III/16 para 5.10 · 1 May 2015
  20. Official TEAP Manual Part A (Consolidated Rev. 1, 1 May 2015), Chapter III, Section III/16 para 6 · 1 May 2015
  21. Official DGMA EAC Branch Circular No. 50 of 2026 · 21 August 2026
  22. Official Merchant Shipping (Standards of Training, Certification and Watch-keeping for Seafarers) Rules, 2014, G.S.R. 546(E), Gazette of India, 30 July 2014 · 30 July 2014
  23. Official DG Shipping Training, Examination and Assessment Programme (TEAP) Part A, Rev. 1, 1 May 2015 · 1 May 2015
  24. Official DGMA Nautical Wing latest news: 2026 written examination timetables and result notices · 9 October 2026
  25. Official DGS Notice F.No. 25-13011/11/2022-NT-DGS: booking for written and all oral examinations, May 2026 (27 Mar 2026) · 27 March 2026
  26. Official TEAP Manual Part A, Section I/11 (Rule 14 of MS (STCW) Rules 2014) · 1 May 2015
  27. Official TEAP Manual Part A (Consolidated Rev. 1, 1 May 2015), Chapter III, Section III/1 para 6.4 · 1 May 2015
  28. Official DGMA Notice to Engineering candidates for CoC Written examination, November 2026 · 26 October 2026
  29. Official DGMA e-Examination Portal: User Manual (Nautical), exams.dgma.gov.in
  30. Official DGMA EAC Branch Circular No. 50 of 2026, para 5 · 21 August 2026
  31. Official DGMA EAC Branch Circular No. 51 of 2026 · 21 August 2026
  32. Official DGMA EAC Branch Circular No. 65 of 2026 · 29 September 2026
  33. Official DGS (EAC-ENGG) Circular No. 25 of 2026 · 19 May 2026
  34. Official TEAP Manual Part A (Consolidated Rev. 1, 1 May 2015), Chapter III, Section III/16 para 8.3 and note to Flow Diagram III/3 · 1 May 2015
  35. Official DGMA EAC Branch Circular No. 49 of 2026 · 15 August 2026
  36. Official DGS Instructions to Examiners: Guidelines on conducting Orals (MEO 1998 Rules), 1 March 2000 · 1 March 2000
  37. Official Addendum I to DGS (NT/ENG) Circular No. 31 of 2025 (05.08.2025) · 5 August 2025
  38. Official DGS Circular No. 16 of 2026 · 16 March 2026
  39. Official DGMA EAC Branch Circular No. 50 of 2026, para 8(e) · 21 August 2026

Where should you go next?

  • Oral topics14 pages: examiner questions with model answer points, deck and engine
  • Question banks7 pages: free MCQ sets with answers and explanations
  • Free tools4 pages: mock oral drill, lights trainer, sea-time calculator, practice tests
Exam Prep DeskMaritime exam researchers

We write from the conventions (STCW, COLREG, SOLAS, MARPOL), the authorities' own notices and published syllabi, and cite the source for every fee, rule and date. We are independent and not linked to any maritime administration or test provider. Found an error? It matters at sea: tell us and see how we correct · Disclaimer.

Related guides

AI voice mock oral

Say it out loud before the examiner asks.

Our examiner asks CoC oral questions by rank and function, listens to your answer, asks the follow-up and scores you against the rule. Early access is open for India first.

  • Deck and engine, every rank
  • Answers referenced to the conventions
  • Independent, not linked to any authority
WhatsApp us