NautemyCoC orals · exams · job testsEarly access
Exam guide21 min readJump to 12 questions

MEO Class 2 oral exam in India: the second engineer CoC, step by step

The MEO Class 2 exam is India's second engineer CoC test for ships of 3000 kW or more. You need 12 months' sea service after Class 4, an approved preparatory course, Part A and Part B written papers, and an oral in each of four management-level functions with 60% to pass.

On this page
  1. Key facts
  2. What is the MEO Class 2 exam?
  3. Who is eligible for the MEO Class 2 exam?
  4. Worked example: when can a Class IV engineer sit MEO Class 2?
  5. How is the MEO Class 2 exam structured?
  6. What is asked in the MEO Class 2 oral, function by function?
  7. How is the MEO Class 2 oral conducted?
  8. What happens on MEO Class 2 oral day?
  9. How do you book the MEO Class 2 exam?
  10. What documents do you need for MEO Class 2?
  11. How long should you prepare for the MEO Class 2 oral? A 12-week plan
  12. What do examiners probe hardest at MEO Class 2?
  13. What do strong MEO Class 2 answers sound like?
  14. Why do candidates fail the MEO Class 2 oral?
  15. What happens after the MEO Class 2 oral?
  16. How much does MEO Class 2 cost, and what happens if you fail a function?
  17. What changed for MEO Class 2 in 2025 and 2026?
  18. Where can you practise for the MEO Class 2 oral?
  19. 12 practice questions
  20. Frequently asked questions
  21. Sources

Key facts

Authority
DG Shipping / DGMA engineering wing, via the MMDs[1]
Certificate
Second engineer, STCW Reg. III/2, 3000 kW or more[2]
Sea time
12 months after Class IV, 8 months propelling (motor)[3]
Part A
2 papers; can be taken right after Class IV[4]
Part B
7 papers and an oral in each of 4 functions[5]
Course
4-month prep course; 3 months for batches from 1 Jan 2027[6]
Pass mark
50% written, 60% oral[7]
Booking
exams.dgma.gov.in[8]
New centre
Visakhapatnam from July 2026[9]

Checked 14 November 2026. Fees and rules change: confirm with the authority before you book.

What is the MEO Class 2 exam?

The MEO Class 2 exam leads to India's Marine Engineer Officer Class II CoC, which qualifies you to serve as second engineer on ships of 3000 kW propulsion power or more under STCW Regulation III/2[2]. It is a management-level certificate, so the questions move from "how do you run it" to "how do you plan, manage and decide".

The exam has a Part A (two written science papers) and a Part B (written papers plus orals in four functions)[5]. You need 50% in each written paper and 60% in each oral[7]. You must also complete an approved preparatory (competency) course before Part B.

The MEO Class 4 oral exam asked whether you can keep a safe watch. The Class 2 oral asks whether you can run the engine department when the chief engineer is asleep: diagnose a fault from readings, plan an overhaul, deal with a port state inspection, and lead people in an emergency. See MEO Class 4 vs Class 2 for a side-by-side view.

Who is eligible for the MEO Class 2 exam?

You need the MEO Class IV CoC and at least 12 months of approved sea service after it, as assistant engineer officer or officer in charge of an engineering watch on ships of 750 kW or more[3]. For a motor or steam certificate, at least 8 of those months must be watchkeeping on main propulsion machinery or UMS duties; a combined certificate needs 16 months with 12 propelling[3].

Part A is different: you can sit it immediately after passing Class IV Part B, with no further sea time[4]. Many engineers clear Part A during their first contract as fourth engineer, which takes pressure off later.

The Chief Engineer issues a watchkeeping certificate in the prescribed format for your service[10]. At least six months of qualifying service must fall within the five years before you apply[11], and NCV service counts only at two-thirds[12]. Check your months with the sea time calculator and our page on CoC sea time requirements.

MEO Class 2 eligibility
RequirementMotor or steamCombined motor and steamSource
Total sea service after Class IV12 months16 months (8 motor + 8 steam)TEAP Table III/16-1[3]
Watchkeeping on main propulsion or UMS8 months12 months (6 + 6)TEAP Table III/16-1
Endorsement for the other plant type6 months total, 4 months propelling-TEAP Table III/16-1
Part AAny time after Class IV Part BSame[4]
Preparatory course4 months now; 3 months for batches from 1 Jan 2027Same[6]

Worked example: when can a Class IV engineer sit MEO Class 2?

You can sit Part A as soon as you pass MEO Class IV Part B, with no sea time[4]. Part B needs 12 months after the Class IV CoC as assistant engineer or OICEW on ships of 750 kW or more, with 8 months of propelling time[3], and the preparatory course.

Example: Sana passes MEO Class IV Part B in March 2025.

Step Dates Notes
Part A papers May 2025 Allowed straight after Class IV Part B
4/E, 12,000 kW tanker (UMS, duty engineer) 1 Jul 2025 - 31 Dec 2025 = 6 months Counts in full, propelling met for these months[13]
3/E, 2,400 kW coastal vessel (NCV) 1 Feb 2026 - 31 Jul 2026 = 6 months Counts at two-thirds = 4 months[12]
Total 10 months, short by 2
3/E, 9,000 kW bulk carrier 1 Sep 2026 - 31 Oct 2026 = 2 months Total reaches 12
Preparatory course From Jan 2027: 3 months, 360 hours[14] Batches from 1 Jan 2027 follow the shorter course[6]

The NCV contract is where most candidates miscount: six calendar months became four.

How is the MEO Class 2 exam structured?

Part A has two papers at management level: Mechanics and Hydromechanics, and Thermodynamics and Heat Transmission. Part B has seven written papers grouped under four functions, each followed by an oral[5]. The paper lengths below come from the November 2026 timetable[8]. Written papers are held monthly at the MMDs; Visakhapatnam started Class II exams in July 2026[9].

You can take the functions in any order and any number, even at your first attempt[15], or ask for a combined oral covering all four[16].

MEO Class 2 written papers and orals
PartSTCW function (management level)Written paper(s)Time (Nov 2026)Oral
AMarine engineering (science base)Mechanics and Hydromechanics; Thermodynamics and Heat Transmission3 h eachNo
BMarine engineeringMEK General; MEK Motor (or Steam)3 h eachYes
BElectrical, electronic and control engineeringMarine Electro Technology3 hYes
BMaintenance and repairMarine Engineering Practice3 hYes
BControlling the operation of the ship and care for persons on boardNaval Architecture; Ship Safety, Environmental Protection and Personnel Care3 h; 2 hYes

What is asked in the MEO Class 2 oral, function by function?

The Class 2 oral covers the same machinery as Class 4 but at the depth of the person responsible for it: performance, diagnosis, planning, regulation and people. The revised preparatory course syllabus, effective 1 January 2027, adds dual-fuel and electronically controlled engines, alternative fuels, EEXI and CII, cyber security and engine-room resource management[17]. Expect questions on those even now.

MEO Class 2 oral syllabus by function
FunctionTypical management-level oral topicsStudy pagesMCQ practice
Marine engineeringIndicator and draw cards, power balance, fuel injection timing, turbocharger surging, crankshaft deflection, bearing failure analysis, electronically controlled engines, boiler water treatment, steam plant faults, refrigeration diagnosisTwo-stroke main engine, auxiliary diesel engines, marine boilers, refrigeration and AC, fresh water generator, fuel oil purifiersMain engine MCQ, boilers MCQ
Electrical, electronic and controlPower management, blackout recovery, protection coordination, high-voltage safety, insulation monitoring, control loops, alarm and shutdown philosophyMarine electrical systems, UMS and automationMarine electrical MCQ
Maintenance and repairPlanned maintenance, condition monitoring, dry-docking work lists, class surveys, emergency repairs, spares management, steering gear and pumpsSteering gear, pumps and pumping systems, air compressors and starting airPumps and purifiers MCQ
Controlling operation and care for personsDamage stability, trim, dry-docking stability, MARPOL Annex I, IV, V and VI, BWM Convention, ISM audits, PSC, MLC, fire-fighting and emergency organisationShip stability, MARPOL, fuel sulphur rules and scrubbers, oily water separator, ISM Code, ballast water management, MLC 2006MARPOL MCQ, stability MCQ, ISM/ISPS MCQ

How is the MEO Class 2 oral conducted?

It is an in-person interview at the MMD, one candidate at a time, with one external and one internal examiner or two internal examiners[18]. The published examiner guidance describes three levels of questioning, basic, operational and responsible, and says the responsible level, built on "why" and "when", is mainly for management-level candidates[19]. So at Class 2 you should expect far more "what would you decide" questions than at Class 4.

A typical pattern: the examiner asks about your last ship as fourth or third engineer, then sets a scenario. "Your exhaust temperatures on one unit are high and the scavenge pressure is low. Talk me through it." You are expected to read the clues, list causes in order of likelihood, say what you would check, and what you would tell the chief engineer and the bridge.

The guidance also says orals are independent of the written papers, results are decided jointly by the examiners, and a failure is recorded by function so you only resit that function[19]. You may hear your oral result at the centre, but it is final only after the Chief Examiner approves it[20].

What happens on MEO Class 2 oral day?

You can take one combined oral across all four functions or separate function orals[16]; in a combined oral a failure is recorded against the particular function, so you re-sit only that one[21].

MEO Class 2 oral day: timeline (rules cited; the rest is our advice)
WhenWhat happensWhat to have or do
Week beforeRe-read your testimonials, TAR or record of service, and last ship's particularsExaminers are encouraged to refer to your TAR book and competencies and not to base the oral on your written papers[21]
MorningReport to the MMD; one candidate is examined at a timePanel: one external and one internal examiner, or two internal examiners[18]
OpeningQuestions on your last ship and your roleKnow power, engine make and type, generators, boilers and your watch routine
CoreDiagnosis from readings, planned maintenance decisions, naval architecture, safety and people[22]Answer: safe action, reason, check, report
If you cannot answer a safety questionAn alternate safety question of equal importance should be asked[21]Say so plainly; do not bluff
EndThe examiner may tell you the oral result[20]Results are final only after the Chief Examiner of Engineers approves them[7]
Two to three working days laterOral result updated on the portal[23]Check your profile before booking anything else

How do you book the MEO Class 2 exam?

All engineering assessment and booking runs on exams.dgma.gov.in[8]. Class II has its own monthly window; in November 2026 MEO Class I, II and ETO booking ran 1 to 8 November[8]. The general booking flow is in our MMD exam booking guide.

  1. 1
    Clear Part A early

    Book Part A any month after Class IV[4]. Passing it during your first contract leaves only Part B after sea time.

  2. 2
    Complete the preparatory course

    Join an approved MEO Class II preparatory course after your sea time. Batches starting from 1 January 2027 run three months instead of four[6].

  3. 3
    Apply for eligibility assessment

    Upload your Class IV CoC, watchkeeping certificates, testimonials, company letters, CDC pages and the course certificate. Start your exams within a year of approval or you will be reassessed[15].

  4. 4
    Book seats at your parent MMD

    Use the first six days of the window. If your MMD has no written seat for a subject, the last two days let you book another MMD, with all papers that month at one centre[24].

  5. 5
    Pay once

    Pay through Bharatkosh and wait for confirmation; repeat only after a failed-transaction receipt[8].

  6. 6
    Sit and track results

    Arrive 45 minutes early for written papers[8]. Watch the portal for the approved results and your Examiner's Authority.

What documents do you need for MEO Class 2?

The document set is longer than for Class 4 because the examiner checks your watchkeeping as an officer. Use the MMD exam documents checklist and carry originals on the day, plus the oral exam day checklist.

How long should you prepare for the MEO Class 2 oral? A 12-week plan

The preparatory course gives you the syllabus; the oral needs your own words and your own ship's examples. Twelve weeks is realistic alongside or straight after the course. Build a notebook of numbers from your ships (pressures, temperatures, clearances, test limits) because Class 2 examiners ask for them.

12-week MEO Class 2 plan
WeeksFocusOutput
1-2Main engine performance: indicator and draw cards, power balance, timing, turbocharger matchingRead three real performance reports and write what you would adjust
3Engine failures: bearings, crankshaft deflection, piston and liner wear, cracked headsA failure-analysis table: symptom, cause, check, action
4Boilers and steam: water treatment, tube failures, safety valve setting and surveyBoiler water test sheet with corrective action
5Auxiliaries: generators, purifiers, compressors, FWG, refrigeration diagnosisFault trees for each
6Electrical management: PMS, blackout recovery, HV safety, protectionBlackout recovery procedure for your last ship
7Maintenance and repair: PMS, surveys, dry dock, emergency repairsA dry-dock engine work list
8Naval architecture: stability, trim, damage stability, dry-dockingFive worked stability calculations
9MARPOL, BWM, MLC, ISM, PSCA mock PSC checklist for the engine room
10-11Mock orals: one function per session, scenario-basedUse the mock oral drill and record yourself
12Gaps and rest; oral readiness checkFinal list of weak answers rehearsed

What do examiners probe hardest at MEO Class 2?

Diagnosis from data. You will be given readings (exhaust temperatures, scavenge pressure, turbocharger speed, cooling water temperatures) and asked what is wrong. List causes in order of likelihood and the check that separates them.

Decisions under pressure. Blackout while manoeuvring, main engine slowdown in a traffic separation scheme, boiler low water level at night. Examiners want safety of the ship first, then the machinery, then the paperwork.

Regulation you will be judged on. As second engineer you sign Oil Record Book pages, manage bunkering and face PSC. Expect MARPOL Annex I and VI detail (Oil Record Book entries under Annex I Reg. 17, bunker delivery notes under Annex VI Reg. 18) and ISM non-conformity handling.

Planning and people. How you plan an overhaul in port, how you assign work, how you run a fire drill in the engine room, how you train a new fourth engineer. The revised syllabus explicitly adds engine-room resource management[17]. Read how to answer oral exam questions for a structure.

What do strong MEO Class 2 answers sound like?

Class 2 examiners want the second engineer's view: what the readings mean, what you check first, and what you tell the chief engineer.

Examiner's note: "One unit's exhaust temperature is 40 degrees above the others." Weak: "The injector is faulty." Strong: the candidate lists likely causes in order (fuel injector or pump, exhaust valve leakage, scavenge port fouling, a faulty thermocouple), says which check separates them (compare the indicator or pressure card, check the fuel pump index, swap or test the thermocouple), and states the limit at which to reduce load. Diagnosis in a logical sequence is one of the six areas the guidance says the oral tests[21].

Examiner's note: "Explain single-failure criteria for steering gear." Weak: a description of the hydraulic circuit. Strong: why SOLAS requires steering to be regained after a single failure in the piping or one power unit on the ships concerned, how isolation of a leaking circuit works on your own gear, and how and when the system is tested before departure. Steering gear single-failure criteria are named in the revised Class II syllabus[22]. See steering gear.

Why do candidates fail the MEO Class 2 oral?

  • Answering at Class 4 level. Describing a procedure when the examiner wanted a judgement and the reason for it.
  • No numbers. Not knowing typical crankshaft deflection limits on your own engine, boiler water test ranges or purifier temperatures from your ship's manual.
  • Weak naval architecture. Many engineers avoid stability and lose the Function 3 oral.
  • Regulation by rumour. Quoting company practice as law. Name the convention and regulation when you can.
  • Too much at once. Booking all four functions straight after the course without mock orals.

The written side has the same trap. The Chief Examiner's 2026 note on Class I scripts found failures came from poor time management, misreading questions and unstructured answers more than missing knowledge[25]. The same discipline wins orals. See why seafarers fail oral exams and what happens if you fail the MMD oral.

What happens after the MEO Class 2 oral?

Results are final after approval by the Chief Examiner of Engineers[7]. You keep every subject you passed and resit only the failed ones at any later exam[26]. A review can be requested on Form 31 within 30 days of the result[15].

On passing all parts you receive an Examiner's Authority valid as a CoC for up to one year[27], and the CoC follows by post. From then the clock starts towards MEO Class 1: at least 12 more months of sea service, with a shorter total if you serve as second engineer[28]. The CoC is valid for five years; plan revalidation before it expires.

How much does MEO Class 2 cost, and what happens if you fail a function?

The 2014 schedule sets Rs 3,000 for the written and Rs 3,000 for the oral in each of four functions[29], and paying for one function covers both papers in it, such as MEK General with MEK Motor[15].

MEO Class 2 fee and re-sit scenarios (2014 schedule)
ScenarioArithmeticTotal
All four functions passed first time4 x Rs 3,000 written + 4 x Rs 3,000 oral + Rs 3,000 enquiry[30]Rs 27,000
Fail the Function 5 oral onceRs 27,000 + Rs 3,000; passed functions are kept[26]Rs 30,000
Fail MEK Motor, pass MEK GeneralThe function fee covers both papers[15]; re-sit only the failed paperCheck the fee summary for the re-sit
Review of a management-level resultForm 31 within 30 days[15]Rs 15,000[30]
Booked, did not appear"Failed (Absent)"[15]Fee lost; book again

What changed for MEO Class 2 in 2025 and 2026?

  • Shorter, revised preparatory course. DGMA EAC Branch Circular No. 49 of 2026 cuts the course from four to three months (360 contact hours, fully offline) for batches from 1 January 2027, with a new syllabus[6][14]. Candidates admitted before that date continue on the old four-month course.
  • New exam portal and Bharatkosh payment for all engineering grades[8].
  • Cross-centre written seats when your parent MMD is full[24].
  • Visakhapatnam added Class II and ETO exams from July 2026[9].
  • Motor or steam endorsement. Circular No. 65 of 2026 lets Class II holders limited to motor or steam add the other type through a Class IV oral after an approved simulator course[31].

Where can you practise for the MEO Class 2 oral?

Use the topic pages for depth, the MCQ banks for recall and the mock drill for speaking. If you also plan to work for foreign-flag owners, compare the UK route in the MCA second engineer oral. Our AI voice mock examiner, which questions you out loud and follows up like an examiner, is in development: join early access.

Oral practice

12 oral questions with model answers

Read the question, answer it out loud as if the examiner is across the table, then open the model answer and mark yourself honestly.

–0/12 done
  1. 1
    CoreEngine maker's performance guidance

    Your main engine exhaust temperature on one unit is 40 degrees above the others and its peak pressure is low. What could cause it and how do you find out?

    Model answer points
    • Likely causes: late injection or poor atomisation (worn or dribbling injector, worn fuel pump, wrong fuel timing), leaking exhaust valve, poor compression from ring or liner wear, or a fouled scavenge port.
    • Take an indicator card and draw card on that unit and compare with others; check compression pressure.
    • Low compression points to rings, liner or exhaust valve; normal compression with low peak points to fuel injection.
    • Swap or test the injector; check the fuel pump lead and VIT setting.
    • Reduce load on the unit if needed and inform the chief engineer; record the findings.
    The examiner may follow up with
    • How do you take a draw card?
    • What does a low compression pressure tell you?
    How did you do?
  2. 2
    DeeperEngine maker's instructions; class survey practice

    How do you take crankshaft deflections and what do the readings tell you?

    Model answer points
    • Engine stopped, cooled to normal temperature, turning gear engaged, ship's trim and loading noted.
    • Fit a dial gauge between the webs at the maker's marked position.
    • Turn the crankshaft and read at set positions (near BDC on both sides, horizontal, TDC), avoiding the connecting rod.
    • Opening and closing of the webs as the crank turns shows misalignment of the main bearings: one bearing sits higher or lower than its neighbours. Read the pattern (open or close at TDC and BDC) against the maker's diagram to find which bearing.
    • Compare with the maker's limits and previous readings; check against hull deflection and loading condition.
    • Action if out of limits: check main bearing wear and clearances, and inform the superintendent and class.
    The examiner may follow up with
    • Why can readings change with loading?
    • What is the risk of ignoring them?
    How did you do?
  3. 3
    CoreTurbocharger maker's instructions

    The turbocharger is surging at full load. Why, and what do you do?

    Model answer points
    • Surging is a breakdown of airflow through the compressor: the pressure ratio is too high for the air flow.
    • Causes: fouled air filter or compressor, dirty or blocked air cooler or scavenge ports, fouled turbine nozzle ring, exhaust back-pressure, one unit misfiring, sudden load change, damaged diffuser.
    • Immediate action: reduce engine load until surging stops, inform the bridge.
    • Then: water-wash compressor and turbine as per maker, check cooler pressure drop, inspect ports and check unit balance.
    • Repeated surging damages bearings and blades; plan an overhaul.
    The examiner may follow up with
    • What is the difference between surging and choking?
    • How do you wash the turbine side?
    How did you do?
  4. 4
    CoreBoiler water treatment supplier's limits

    Boiler water tests show high chloride and falling alkalinity. What is happening and what will you do?

    Model answer points
    • Rising chloride points to sea water contamination, usually a leaking condenser or drain cooler, or contaminated feed water.
    • Falling alkalinity increases the risk of corrosion; scale may follow if hardness salts enter.
    • Find the source: test condensate from each cooler and the hot well, check the FWG output, check the salinity alarm.
    • Increase blowdown to bring chloride down, dose treatment chemicals to restore alkalinity and phosphate as per the treatment supplier's limits.
    • If contamination is heavy, consider shutting down the boiler and draining.
    • Log results and inform the chief engineer.
    The examiner may follow up with
    • How do you carry out a scum blowdown?
    • What does phosphate treatment do?
    How did you do?
  5. 5
    CoreSOLAS Ch. II-1 Reg. 43

    You have a total blackout during port manoeuvring. Describe your actions.

    Model answer points
    • Inform the bridge immediately; the master may need to anchor or use tugs.
    • Confirm the emergency generator has started and taken the emergency switchboard; under SOLAS Ch. II-1 Reg. 43 it must start automatically and supply emergency loads quickly.
    • Find the cause before resetting: overload, fuel starvation, a tripped breaker, a protection operation.
    • Start a standby generator, close it on the dead bus, restore essential services in sequence: steering gear, lube oil and cooling pumps, main engine auxiliaries.
    • Restart the main engine when services are stable and the bridge agrees.
    • Record the event, investigate the root cause and report under the SMS.
    The examiner may follow up with
    • What loads go on first?
    • How does a preferential trip prevent blackout?
    How did you do?
  6. 6
    DeeperSOLAS Ch. II-1 Reg. 29

    What does SOLAS require of the main steering gear's rudder movement?

    Model answer points
    • Under SOLAS Ch. II-1 Reg. 29 the main steering gear must put the rudder from 35 degrees on one side to 35 degrees on the other at the deepest seagoing draught and maximum ahead service speed.
    • It must also move it from 35 degrees on either side to 30 degrees on the other side in not more than 28 seconds under the same conditions.
    • The auxiliary steering gear must move the rudder from 15 degrees one side to 15 degrees the other in not more than 60 seconds at half speed or 7 knots, whichever is greater.
    • Tests before departure are covered by SOLAS Ch. V Reg. 26.
    The examiner may follow up with
    • What is single failure criterion for tanker steering gear?
    • How do you bleed air from the system?
    How did you do?
  7. 7
    CoreSTCW Reg. I/14; ISM Code Element 6

    You are second engineer and a new fourth engineer joins. How do you get him ready to keep a watch?

    Model answer points
    • Company and ship familiarisation within the time set by the SMS, before he is given duties, as required by STCW Reg. I/14.
    • Walk him through the engine room: escape routes, fire stations, emergency stops, quick-closing valves, CO2 room.
    • Explain the machinery, the alarm system and the UMS rounds; give him the standing orders.
    • Let him keep watches with a senior engineer until he is competent; check his TAR book tasks.
    • Make sure he understands hours of rest under STCW Reg. VIII/1.
    • Record the familiarisation and report his progress to the chief engineer.
    The examiner may follow up with
    • What are the minimum hours of rest?
    • What goes in the familiarisation checklist?
    How did you do?
  8. 8
    CoreMARPOL Annex VI Reg. 18; MARPOL Annex I Reg. 17

    How do you plan a bunkering operation as second engineer?

    Model answer points
    • Check fuel quality specification, quantity ordered and tanks to receive it; avoid mixing incompatible fuels.
    • Calculate ullages and the maximum fill (commonly not more than about 90% of capacity, per company rules).
    • Hold a pre-bunkering meeting; agree pumping rate, signals and emergency stop with the barge.
    • SOPEP equipment ready, scuppers plugged, communications tested, no smoking.
    • Take the MARPOL sample at the ship's manifold; under MARPOL Annex VI Reg. 18 keep the bunker delivery note for three years and the sealed sample until the fuel is substantially used but at least 12 months.
    • Record in the Oil Record Book Part I (Annex I Reg. 17).
    The examiner may follow up with
    • What if the BDN sulphur figure is above the limit?
    • How do you handle an overflow?
    How did you do?
  9. 9
    CoreMARPOL Annex I Reg. 14

    A port state control inspector finds the 15 ppm alarm does not stop the OWS discharge. What follows?

    Model answer points
    • It is a serious MARPOL Annex I deficiency: Reg. 14 requires the oil filtering equipment on ships of 10,000 GT and above to have a 15 ppm alarm and an automatic stop; where fitted on smaller ships it must also work.
    • PSC may detain the ship until it is fixed, and may look for evidence of illegal discharge in the ORB and sounding records.
    • Under the ISM Code it is a non-conformity: find the root cause, repair, test, record and report.
    • Check calibration and the three-way valve, test with an approved method, and train the engineers.
    The examiner may follow up with
    • How do you test the 15 ppm alarm?
    • What is a magic pipe?
    How did you do?
  10. 10
    CoreIMO Intact Stability Code 2008, Part B

    Explain the free surface effect and why an engineer should care.

    Model answer points
    • In a slack tank, liquid shifts as the ship heels, moving the centre of gravity of the liquid and effectively raising the ship's G.
    • The loss of GM is the free surface moment divided by displacement; it depends on the tank's breadth (to the power of three), not its depth.
    • Engineers fill, empty and transfer fuel, ballast and fresh water; many slack tanks at once can reduce stability seriously.
    • Plan transfers to keep the number of slack tanks small and inform the chief officer before large transfers.
    The examiner may follow up with
    • How does a longitudinal bulkhead help?
    • Why is stability important in dry dock?
    How did you do?
  11. 11
    DeeperCompany HV safety rules; STCW Code Table A-III/2

    How do you safely work on a high-voltage switchboard?

    Model answer points
    • Work only under a permit to work and the HV safety rules of the company; only authorised persons.
    • Switch off and isolate the circuit, lock and tag the breaker (rack it out where possible).
    • Prove dead with an approved HV tester, tested before and after use.
    • Earth the conductors with approved earthing devices before touching.
    • Fence the safe working area and issue the sanction for test if testing is needed.
    • Cancel the permit only when everyone is clear and earths are removed.
    The examiner may follow up with
    • What is a sanction for test?
    • Why earth after proving dead?
    How did you do?
  12. 12
    TrapISM Code Element 4; SOLAS Ch. II-1 Part E

    The chief engineer tells you to bypass the main engine low lube oil pressure shutdown so the ship can keep schedule. What do you do?

    Model answer points
    • Do not simply bypass a safety shutdown. A low lube oil pressure trip protects against bearing failure and possibly a crankcase explosion.
    • Find out why the pressure is low: filter blocked, pump worn, oil temperature, sensor fault.
    • If a sensor fault is proven, any override must follow the SMS: risk assessment, master informed, reduced speed, extra monitoring, logged and reported.
    • Raise your concern clearly and record it; under the ISM Code you can report to the DPA.
    The examiner may follow up with
    • Who is the DPA?
    • What is the difference between a slowdown and a shutdown?
    How did you do?

Reading answers is not the same as saying them. Our AI voice examiner asks these out loud, listens to your answer, asks the follow-up and marks you against the rule. Join early access or try the free timed mock oral drill.

Frequently asked questions

How much sea time is needed for MEO Class 2?

At least 12 months of approved sea service after the MEO Class IV CoC, with 8 months on main propulsion or UMS watchkeeping for a motor or steam certificate[3]. A combined motor and steam certificate needs 16 months.

Can I write MEO Class 2 Part A before my sea time?

Yes. Part A can be taken immediately after you pass Class IV Part B, with no sea service[4]. Many engineers clear it during their first contract.

What are the MEO Class 2 Part A subjects?

Mechanics and Hydromechanics, and Thermodynamics and Heat Transmission, each a 3-hour paper[5][8].

How long is the MEO Class 2 preparatory course?

Four months today. For batches starting on or after 1 January 2027 it becomes three months with a revised syllabus[6].

What is the MEO Class 2 oral pass mark?

60% in each oral; written papers need 50% each[7].

Can I take one MEO Class 2 function at a time?

Yes. You may appear for any number of functions at your first attempt[15]. You can also opt for a combined oral of all four[16].

Which MMDs hold MEO Class 2 exams?

The main MMD centres, with Visakhapatnam added for Class II from July 2026[9]. See MMD exam centres for the list and capacities.

Is MEO Class 2 harder than Class 4?

The questions are deeper: diagnosis, planning, regulation and leadership instead of procedures. Read MEO Class 4 vs Class 2 for the differences.

Does NCV sea time count for MEO Class 2?

NCV service counts at two-thirds rate towards non-NCV certificates such as Class II[12]. See CoC sea time requirements.

What if I fail a Class 2 oral?

Resit only that function at a later exam[26]. You can ask for a review on Form 31 within 30 days[15].

Do I need a steam endorsement for MEO Class 2?

Only if you want to serve on steam ships. A motor-only Class II holder can add steam later; Circular No. 65 of 2026 explains the oral and simulator route[31].

Is an Indian MEO Class 2 accepted abroad?

Many flag states endorse Indian CoCs. For the UK route see is an Indian CoC valid in the UK and India vs UK CoC.

What is the MEO Class 2 exam fee?

Engine exam fees are charged per function, so one payment covers paired subjects such as MEK General with MEK Motor[15]. You pay through Bharatkosh on the portal, which shows the exact amount at checkout[8]; fees are not refunded[32]. See MMD exam fees.

When do you get the MEO Class 2 oral result?

The examiner may tell you the oral result at the centre, but every result is formally declared only after the Chief Examiner of Engineers approves it[20]. If you think a result is wrong, apply on Form 31 to the MMD within 30 days[15].

What is the MEO Class 2 exam fee in India?

The 2014 schedule sets Rs 3,000 per written and Rs 3,000 per oral for each of four functions[29]. Passing everything at the first attempt costs Rs 24,000, plus Rs 3,000 for the eligibility enquiry[30].

Who takes the MEO Class 2 orals, and how many examiners are there?

MEO orals are held one candidate at a time before one external and one internal examiner, or two internal examiners[18]. Examiners question you at basic, operational and responsible levels in a ratio of about 1:6:3 and decide the result together[19].

Sources 32 documents

Each number in the text links to the source below. Labels show the type of source; see our editorial policy.

  1. Official DGMA: MMD Mumbai About Us · 13 November 2026
  2. Official TEAP Manual Part A (Consolidated Rev. 1, 1 May 2015), Chapter III, Tables III/0-1 and III/0-2 · 1 May 2015
  3. Official TEAP Manual Part A (Consolidated Rev. 1, 1 May 2015), Chapter III, Section III/2 para 2 and Table III/16-1 · 1 May 2015
  4. Official TEAP Manual Part A (Consolidated Rev. 1, 1 May 2015), Chapter III, Section III/16 para 8.3 and note to Flow Diagram III/3 · 1 May 2015
  5. Official TEAP Manual Part A (Consolidated Rev. 1, 1 May 2015), Chapter III, Section III/2 para 5 · 1 May 2015
  6. Official DGMA EAC Branch Circular No. 49 of 2026 · 15 August 2026
  7. Official TEAP Manual Part A (Consolidated Rev. 1, 1 May 2015), Chapter III, Section III/16 para 10 · 1 May 2015
  8. Official DGMA Notice to Engineering candidates for CoC Written examination, November 2026 · 26 October 2026
  9. Official DGS Engineering Examination Notice (16.06.2026) · 16 June 2026
  10. Official TEAP Manual Part A (Consolidated Rev. 1, 1 May 2015), Chapter III, Section III/16 paras 1.4-1.5 · 1 May 2015
  11. Official TEAP Manual Part A (Consolidated Rev. 1, 1 May 2015), Chapter III, Section III/16 para 5.1 · 1 May 2015
  12. Official TEAP Manual Part A (Consolidated Rev. 1, 1 May 2015), Chapter III, Section III/16 para 5.3 · 1 May 2015
  13. Official TEAP Manual Part A (Consolidated Rev. 1, 1 May 2015), Chapter III, Section III/16 para 5.9 · 1 May 2015
  14. Official DGMA EAC Branch Circular No. 49 of 2026, Annexures II and III · 15 August 2026
  15. Official DG Shipping Engineering Wing FAQs: E-Governance and E-Pariksha (2024) · 1 January 2024
  16. Official TEAP Manual Part A (Consolidated Rev. 1, 1 May 2015), Chapter III, Section III/16 para 8.7 · 1 May 2015
  17. Official DGMA EAC Branch Circular No. 49 of 2026, Part A · 15 August 2026
  18. Official DGS Instructions to Examiners Circular No. 071 (3 Aug 2004) · 3 August 2004
  19. Official DGS Instructions to Examiners: Guidelines on conducting Orals (MEO 1998 Rules), 1 March 2000 · 1 March 2000
  20. Official DGS Instructions to Examiners Circular No. 67 (14 July 2004) · 14 July 2004
  21. Official DG Shipping, Instructions to Examiners: Guidelines on conducting Orals (MEO 1998 Rules), Issue 00, 1 March 2000 · 1 March 2000
  22. Official DGMA EAC Branch Circular No. 49 of 2026 on preparatory courses for MEO and ETO CoC examinations, 15 Aug 2026 · 15 August 2026
  23. Official DG Shipping Engineering Wing, FAQ on e-Governance and e-Pariksha
  24. Official DGMA Notice to candidates appearing for MEO Class II and Class IV written examinations (2 Nov 2026) · 2 November 2026
  25. Official Note from the Chief Examiner of Engineers to MEO Class I candidates (16 Oct 2026) · 16 October 2026
  26. Official TEAP Manual Part A (Consolidated Rev. 1, 1 May 2015), Chapter III, Section III/16 paras 8.2 and 9 · 1 May 2015
  27. Official TEAP Manual Part A (Consolidated Rev. 1, 1 May 2015), Chapter III, Section III/16 para 11.2 · 1 May 2015
  28. Official TEAP Manual Part A (Consolidated Rev. 1, 1 May 2015), Chapter III, Section III/3 para 2 and Section III/16 · 1 May 2015
  29. Official Merchant Shipping (STCW for Seafarers) Rules, 2014, G.S.R. 546(E), Schedule (Fees, see Rule 78), Gazette pp. 129-132 · 30 July 2014
  30. Official Merchant Shipping (Standards of Training, Certification and Watch-keeping for Seafarers) Rules, 2014, G.S.R. 546(E), Gazette of India, 30 July 2014 · 30 July 2014
  31. Official DGMA EAC Branch Circular No. 65 of 2026 · 29 September 2026
  32. Official DGMA Nautical Wing: Examination SOPs and FAQs

Where should you go next?

  • Oral topics14 pages: examiner questions with model answer points, deck and engine
  • Question banks7 pages: free MCQ sets with answers and explanations
  • Free tools4 pages: mock oral drill, lights trainer, sea-time calculator, practice tests
Exam Prep DeskMaritime exam researchers

We write from the conventions (STCW, COLREG, SOLAS, MARPOL), the authorities' own notices and published syllabi, and cite the source for every fee, rule and date. We are independent and not linked to any maritime administration or test provider. Found an error? It matters at sea: tell us and see how we correct · Disclaimer.

Related guides

AI voice mock oral

Say it out loud before the examiner asks.

Our examiner asks CoC oral questions by rank and function, listens to your answer, asks the follow-up and scores you against the rule. Early access is open for India first.

  • Deck and engine, every rank
  • Answers referenced to the conventions
  • Independent, not linked to any authority
WhatsApp us