On this page
- Key facts
- What is the second mate Function 2 oral?
- How is the second mate oral split by STCW function?
- What is asked in the second mate Function 2 oral?
- How does the Function 2 syllabus turn into examiner questions?
- How is the Function 2 oral conducted?
- What happens on the day of the Function 2 oral?
- What do examiners probe hardest in the Function 2 oral?
- What do weak and strong Function 2 answers sound like?
- Why do candidates fail the second mate Function 2 oral?
- How should you structure a Function 2 answer?
- Which situational questions come up in the Function 2 oral?
- How should you prepare for the Function 2 oral in four weeks?
- How do you book or re-book only the Function 2 oral?
- If you fail Function 2, what can you book next?
- What should you have ready on oral day?
- What changed for the Function 2 oral in 2025 and 2026?
- Where can you practise Function 2 questions out loud?
- What kind of questions should you expect? 35 Function 2 practice questions
- 35 practice questions
- Frequently asked questions
- Sources
Key facts
- Function
- Cargo handling and stowage (STCW A-II/1)[1]
- Written paper
- Cargo Handling and Stowage[2]
- Oral fee
- ₹1,000 (2014 schedule)[3]
- Format
- One-to-one viva, run online even at the MMD[4]
- Panel
- Internal DGS/MMD and external examiners[5]
- Booking
- Any function on its own since July 2024[6]
- Re-attempt
- At least one month between attempts[7]
- Validity of a pass
- 5 years per function[8]
Checked 14 November 2026. Fees and rules change: confirm with the authority before you book.
What is the second mate Function 2 oral?
The second mate Function 2 oral is the Cargo Handling and Stowage oral of the Second Mate (FG) CoC: a viva on hold preparation, stowage and securing, dangerous goods, bulk cargoes, tankers, and inspecting cargo spaces and ballast tanks.
It tests STCW Table A-II/1 "Cargo handling and stowage at the operational level". DGS Circular 07 of 2026 lists two competences for this oral: monitoring the loading, stowage, securing, care during the voyage and unloading of cargoes, and inspecting and reporting defects and damage to cargo spaces, hatch covers and ballast tanks[1]. The oral fee is ₹1,000 under the 2014 schedule[3], and its written paper is Cargo Handling and Stowage[2].
Function 2 is the shortest syllabus of the three, but it is easy to fail if you only know your own ship type. A tanker officer will be asked about grain and containers; a bulk officer about IMDG segregation. This page gives the syllabus by competence, how the oral runs, what examiners push on, a four-week plan and 35 practice questions with model answers.
How is the second mate oral split by STCW function?
The second mate oral is not one exam. It is one oral per STCW function, booked and passed separately, and each pass stays valid for five years[8].
The STCW Code groups competence into seven functions, three of which belong to the deck officer at operational level[9]. The fee schedule in the MS (STCW) Rules 2014 lists a ₹1,000 written fee and a ₹1,000 oral fee for each function: Navigation, Cargo Handling and Stowage, Controlling the Operation of the Ship, and Radio Communications[3]. Form 29 records the orals as NAV, CARGO and SOF, plus Signals[3]. The signal examination has a visual part held separately at the MMD and an oral part asked inside the Function 1 oral; you pass Navigation only when the written, the signal visual and the oral are all cleared[7].
Since 1 July 2024 you may book any function you like, in any order, instead of all at once[6]. You can sit a function's oral only if that function's written is booked or awaiting result; a failed written in that function bars its oral until you clear it[6]. DGS Circular 07 of 2026 now publishes the Second Mate oral (preparatory) syllabus in its Annexure II, set out function by function[1]. If you want the whole exam in one place, start with the second mate oral exam guide; our page on what STCW functions are explains the terms.
| Function | Written papers | Oral | Our guide |
|---|---|---|---|
| Function 1: Navigation at the operational level | Celestial Navigation; Terrestrial and Coastal Navigation; Bridge Equipment and Watchkeeping; Meteorology | Yes, and the signals oral is asked inside it; a separate signal visual test is held at the MMD | Function 1 oral guide |
| Function 2: Cargo handling and stowage at the operational level (this page) | Cargo Handling and Stowage | Yes | Function 2 oral guide |
| Function 3: Controlling the operation of the ship and care for persons on board at the operational level | Ship Construction, Stability, Ship Safety and Environment Protection | Yes | Function 3 oral guide |
| Radio communications | Covered by the GMDSS certificate route | No separate MMD oral; the GMDSS certificate must be held before the CoC is issued | GMDSS topic |
What is asked in the second mate Function 2 oral?
Circular 07 of 2026 names the codes the Function 2 examiner works from: ISGOTT, the CSS Code, the Timber Code, the Cargo Securing Manual, IMDG segregation with MFAG and EmS, the IMSBC and BLU Codes, the Grain Code and precautions when loading high-density cargoes[1].
The second competence is inspection: where damage and defects are found after loading and unloading, corrosion and heavy weather, which parts of the structure are critical, how corrosion in holds and ballast tanks is caused and prevented, and why the Enhanced Survey Programme exists[1]. Know the cargo documents and the cargo plan for your last ship, and be ready to explain one cargo you did not carry.
| Competence / area | What examiners ask about | Study pages | Practice |
|---|---|---|---|
| Cargo handling, stowage and securing | Hold preparation, effect of cargo and heavy lifts on stability, CSS Code, Cargo Securing Manual, lashing, sweat and ventilation, cargo documents | Cargo work, ship stability | Cargo work MCQ |
| Dangerous goods | IMDG classes, labels and marks, segregation terms, DG documents, EmS and MFAG | Dangerous goods (IMDG) | IMDG MCQ |
| Solid bulk cargoes | IMSBC groups A, B and C, TML and moisture, can test, coal and other hazardous bulk cargoes, BLU Code loading plans, high-density cargoes | Bulk carriers, cargo work | Cargo work MCQ |
| Grain | Document of authorisation, grain shifting, trimming and securing | Ship stability, bulk carriers | Stability MCQ |
| Containers and timber | VGM, stack weights, lashing, reefers, timber deck cargo | Container ships | Cargo work MCQ |
| Tankers | ISGOTT basics, inert gas, static electricity, ullaging, tank cleaning hazards | Tanker operations, enclosed space entry | MARPOL MCQ |
| Inspect and report damage | Where to look in holds, hatch covers and ballast tanks, corrosion, coatings, Enhanced Survey Programme | Ship construction, ballast water management | SOLAS MCQ |
How does the Function 2 syllabus turn into examiner questions?
Annexure II lists the cargo competences and the codes behind them: ISGOTT, the CSS Code, the Timber Code, the Cargo Securing Manual, IMDG segregation, MFAG, EmS, the IMSBC and BLU Codes, the Grain Code and high-density cargo precautions[1]. Each becomes a question like those below (our wording).
| Syllabus item (official source) | What the examiner is checking | Typical opening question (our wording) | Likely follow-up | Where to revise |
|---|---|---|---|---|
| Monitor loading, stowage and securing | Cargo plan, stowage factor, lashing checks | "How do you check a container lashing plan at sea?" | "What do you do after heavy rolling?" | Cargo work |
| Cargo Securing Manual | What it contains; when it applies | "What is in the Cargo Securing Manual?" | "Who approves it?" | Container ships |
| CSS Code | Non-standardised cargo securing principles | "How would you secure a heavy lift on deck?" | "How do you estimate lashing strength?" | Cargo work MCQ |
| Timber Code | Deck cargo, lashings, stability with icing and water absorption | "What precautions for a timber deck cargo?" | "Why can GM drop during the voyage?" | Ship stability |
| IMDG segregation | Segregation table; class and subsidiary risk | "Class 3 and Class 5.1 in the same hold?" | "Where do you find the segregation requirement?" | Dangerous goods (IMDG), IMDG MCQ |
| EmS and MFAG | Fire and spillage schedules; medical first aid guide | "A drum of Class 8 is leaking on deck. What do you do?" | "Which EmS schedule and how do you find it?" | Emergency procedures |
| IMSBC Code | Group A, B, C cargoes; TML and moisture | "What is a Group A cargo?" | "What documents must the shipper provide?" | Bulk carriers |
| BLU Code | Ship-shore loading plan and communication | "What does the BLU Code require before loading?" | "What if the terminal exceeds the agreed rate?" | Bulk carriers |
| Grain Code | Grain shift, heeling moments, securing | "Why is grain dangerous?" | "How do you reduce grain heeling moments?" | Ship stability MCQ |
| High-density cargoes | Tank top strength, loading sequence | "Precautions when loading steel coils or ore?" | "What is permissible tank top load?" | Ship construction |
| ISGOTT (tankers) | Inert gas, tank atmosphere, safety checklist | "What is the ship-shore safety checklist?" | "Why keep tanks inerted?" | Tanker operations |
| Inspect cargo spaces, hatch covers and ballast tanks | Defects, coating, hatch seals, reporting | "How do you test hatch cover tightness?" | "You find a cracked frame in a hold. Who do you inform?" | Enclosed space entry |
How is the Function 2 oral conducted?
The Function 2 oral is a one-to-one viva, normally online, in front of a panel of internal DGS and MMD examiners and external examiners such as serving or former Masters[5].
Even when you choose to attend at the MMD, the oral runs on an online platform[4]. A common opening is "What was your last ship and what cargo did you carry?" The examiner then tests whether you understood why things were done: why the hold was washed with fresh water, why that hatch was taped, why the chief officer stopped loading at a certain draft. After that, expect one or two cargoes from outside your experience.
The DGS rubric judges articulation, logical sequence, understanding rather than recall, application and composure[5]. No official oral length or deck pass mark is published that we could verify.
What happens on the day of the Function 2 oral?
The day runs on the 2021 online-oral rules: ready by 0930 in formals, two devices, a clear desk[10]. Cargo examiners often ask you to sketch a stowage plan or a segregation layout, so practise drawing with the platform tools or on paper[10].
| When | What happens | What you need |
|---|---|---|
| 3-5 days before | Trial call on both devices; speed test on fast.com | 5 Mbps or more on each device, loaded latency 150 ms or less[10] |
| By the second-last day of the previous month | No email or admit-card date yet? Email the MMD | The admit-card date is final; schedules are not published[10] |
| Evening before | Set up a quiet, well-lit room with desk, chair and lockable door; charge the UPS or inverter | No other person may be in the room[10] |
| Before 0930 | Primary device facing you; secondary behind you showing your back and the room, mic muted; no virtual background | Desk against a wall; no light behind you[10] |
| 0930 | Attendance; be reachable | Formal clothes; unreachable means absent[10] |
| Link arrives | Join on both devices as "Guest" with your full name and wait | Examiner checks audio, video and room[10] |
| Identity check | Show documents to the camera | Admit card, CDC, passport, STCW certificates[10] |
| During the oral | Video on, mic unmuted, look at the camera; sketch when asked | Only blank paper, pencil, eraser and pen on the desk[10] |
| If the link drops | Rejoin at once; the examiner allows some time | After that you are treated as absent[10] |
| End | Let the examiner close the call | Ending it yourself means you are deemed failed; recording is misconduct[10] |
What do examiners probe hardest in the Function 2 oral?
Examiners probe cargo safety: whether a cargo can shift, liquefy, heat, react or overstress the ship, and what the second mate does about it.
- Liquefaction. TML, moisture certificates, the can test and the signs of a cargo going wet. A ship lost to liquefaction is a classic examiner story.
- IMDG segregation. The four segregation terms, how to read the segregation table, and where the DG goes on a container ship.
- Securing. The Cargo Securing Manual, maximum securing load and the CSS Code rule of thumb.
- Sweat and ventilation. Ship's sweat versus cargo sweat and when not to ventilate.
- Coal and other hazardous bulk cargoes. Gas monitoring, ventilation rules and self-heating.
- Heavy lifts. Why GM falls the moment the lift leaves the ground.
- Ballast tank and hold inspection. Where corrosion and cracks start, and how you report them.
For the method of answering these, see what oral examiners look for.
What do weak and strong Function 2 answers sound like?
Cargo examiners want the code, the document and the safe action, in that order[1].
Examiner's note: "You are loading a Group A concentrate and the cargo looks wet." Weak: "I do a can test and continue." Strong: "Group A cargoes can liquefy. I check the shipper's declaration for the moisture content and the transportable moisture limit and the date of the test. The can test is only a check; if it shows free moisture, I stop loading, inform the master and the shipper, and the cargo is not accepted until it is retested and shown to be below the TML."
Examiner's note: "Before entering a cargo hold after fumigation or a long voyage, what do you do?" Weak: "Ventilate and go in." Strong: treat it as an enclosed space: permit, ventilation, atmosphere testing for oxygen and toxic or flammable gases with a calibrated meter, a standby person at the entrance, rescue equipment ready and communication agreed, and no entry while any reading is unsafe. See enclosed space entry.
Examiner's note: "Can you stow Class 1 next to Class 3?" Weak: a guess. Strong: the candidate says segregation is read from the IMDG Code segregation table and the dangerous goods list for the actual substances, explains what each segregation term means for a hold or container stow, and refuses to answer from memory where the table decides.
Why do candidates fail the second mate Function 2 oral?
Candidates fail Function 2 mostly because they know only their own ship type, or because they cannot link cargo to stability and safety.
DGS found many candidates needing several attempts at orals even after passing the written papers[5]. In Function 2 the patterns are:
- Saying a Group A cargo is fine to load at or just below TML without knowing what the TML is.
- Mixing up "away from" and "separated from" in IMDG segregation.
- Not knowing the documents: mate's receipt, bill of lading, cargo manifest, DG declaration, cargo information for bulk cargoes.
- Ventilating a cold cargo in warm humid air.
- Talking about tanker work without mentioning gas, static or enclosed spaces.
- No answer for "where would you look for damage in this ballast tank?"
Read why seafarers fail oral exams for more.
How should you structure a Function 2 answer?
Start with the hazard, then the rule or code that controls it, then the precautions in the order you would do them, then the record or report.
For a cargo question use hazard, code, precautions, monitoring, records: "Coal can emit methane and self-heat (hazard). The IMSBC Code schedule for coal applies (code). Before loading I check the cargo declaration and gas detection equipment... (precautions). During the voyage I measure methane, oxygen and carbon monoxide... (monitoring). I log the readings and report to the master (records)."
For an inspection question use where, what, how, report: which members, what defect, how you find it, how you report it. Name the publication you would open on board; examiners like a candidate who knows where to look things up.
Which situational questions come up in the Function 2 oral?
Function 2 scenarios usually put you on deck during loading or on passage with a cargo problem.
- Wet bulk cargo: "The shipper's moisture certificate is three weeks old and the cargo on the conveyor looks wet." Stop, inform the chief officer and master, request fresh testing, do a can test, refuse if in doubt.
- Container with no VGM: it must not be loaded.
- Heavy lift with ship's gear: calculate the list, fill ballast, minimise free surface, clear the area.
- Coal cargo, methane rising: surface ventilation only, no hot work, report.
- Cracked frame found in a hold: record, photograph, report to the master for the company and class.
All are in the practice set below.
How should you prepare for the Function 2 oral in four weeks?
Spend week one on general cargo, securing and stability, week two on dangerous goods, week three on bulk cargo and grain, and week four on tankers, inspection and full mock orals.
Use the codes, not only notes: open the IMSBC Code at the coal and iron ore concentrate schedules, and the IMDG Code at the segregation table. Spaced, out-loud practice works better than rereading[11].
| Week | Focus | Daily routine | Pages to use |
|---|---|---|---|
| 1 | Hold preparation, stowage, securing, sweat and ventilation, cargo documents, heavy lifts | 2 topics read, 10 questions answered out loud, one stability calculation | Cargo work, ship stability |
| 2 | IMDG Code: classes, marks, segregation, documents, EmS, MFAG | Segregation table drill, 10 MCQs, explain one EmS schedule | Dangerous goods, IMDG MCQ |
| 3 | IMSBC Code, BLU Code, grain, high-density cargoes, containers, timber | One cargo schedule a day, VGM and lashing questions | Bulk carriers, container ships |
| 4 | Tankers, inspection of holds and ballast tanks, ESP; full mocks | 2 mock orals with follow-ups, weak-answer review | Tanker operations, mock oral drill |
How do you book or re-book only the Function 2 oral?
You book the Function 2 oral on the e-Examination Portal in the monthly window, choosing that function alone if the others are already passed or planned for later[6].
Only one examination booking is allowed per calendar month; inside it you choose written only, oral only, or both[12]. The fee is not refunded[3], and DGS warns that candidates who cannot meet the online-oral requirements should not book, because the fee is forfeited[13]. If you fail, keep at least one month between two attempts at the same oral; once all written papers of all functions are passed you may book an oral every month[7]. Booking and then not appearing also costs you at least a one-month gap[6]. The MMD exam booking guide shows each portal screen.
- 1Clear eligibility assessment
Fresh candidates complete eligibility assessment at their MMD; documents can be sent through the institute by post or courier, and seats can be booked once assessment is approved[13].
- 2
- 3Book in the monthly window
Windows are announced in DGMA notices. For November 2026, oral-only booking ran to 31 October at 18:00 with admit cards on 2 November[12].
- 4Pay once and wait
Do not pay twice; wait for payment confirmation. The portal helpdesk is [email protected][16].
- 5
- 6
- 7After a fail, decide: review or re-book
You may apply on Form 31 within 30 days for a review by a different examiner[3], or re-book after the one-month gap. See what happens if you fail an MMD oral.
If you fail Function 2, what can you book next?
You re-sit only the cargo oral after a month; a failed Cargo Handling and Stowage paper blocks it until passed[7].
Fee arithmetic. Under the 2014 schedule each Function 2 attempt costs Rs 1,000 for the oral, and Rs 1,000 for the function's written if you must re-sit a paper[3]. Two oral attempts cost 2 x Rs 1,000 = Rs 2,000; a failed paper plus two orals costs Rs 3,000. Nothing is refunded[3].
| Scenario | Rule | What to book next | Fee (2014 schedule) |
|---|---|---|---|
| Failed the Function 2 oral, all written passed | One month between attempts; orals every month once all written are passed[7] | Function 2 oral in the next oral window | Rs 1,000[3] |
| Failed a Cargo Handling and Stowage written paper | No Function 2 oral until all its papers are passed[7] | That paper in the next Second Mate session (2026: May, July, September, November[19]) | Rs 1,000 for the written |
| Booked the oral, did not appear | At least one month break; fee forfeited[6] | Same oral, month after next | Rs 1,000 again |
| Online link failed and could not reconnect | Treated as absent[10] | Same oral after the gap | Rs 1,000 again |
| Failed twice; you think the second was unfair | Form 31 review within 30 days, by a different examiner; result final[3] | Review, or re-sit | Review Rs 6,000[3] vs re-sit Rs 1,000 |
| Other functions passed in 2022; this one still pending | Passed functions last five years from passing[8] | Finish this function before the oldest pass expires | - |
What should you have ready on oral day?
Have your admit card, original ID and the course certificates that support the competences the examiner may ask about; all relevant modular courses must be completed before the oral[13].
DGMA lists Form 29 from e-Samudra, sea service certificates, training certificates and a medical fitness certificate among the nautical exam documents[20]. For an online oral you must also meet Annex I of the 10 May 2021 notice on video-conferencing orals[13]: a quiet room, a working camera and microphone, and a stable connection. Use our MMD exam documents checklist and the oral exam day checklist, and read online oral exam tips before a video oral.
What changed for the Function 2 oral in 2025 and 2026?
The main changes are a published Function 2 oral syllabus, new IMDG and IMSBC amendments and new container-loss reporting rules.
Examiners like to ask "what is the latest amendment?" Know the amendment number and date for the codes you use.
| When | Change | Why it matters in the oral |
|---|---|---|
| Feb 2026 | Circular 07 of 2026 names the codes for the Function 2 oral[1] | These codes are the examiner's checklist |
| 1 Jan 2025 | IMSBC Code Amendment 07-23 became mandatory[21] | Current bulk cargo rules |
| 1 Jan 2026 | IMDG Code Amendment 42-24 became mandatory[21] | Current dangerous goods rules |
| 1 Jan 2026 | Masters must report lost and sighted drifting containers[22] | Likely container-ship follow-up |
| 1 Jan 2027 | IMSBC Amendment 08-25 enters into force, voluntary from 2026[23] | Shows you track amendments |
| Optional | Grain Code amendment adds an optional fourth loading condition[23] | Grain stability follow-up |
Where can you practise Function 2 questions out loud?
Practise by answering out loud, under time pressure, to someone who asks follow-ups, because that is what the oral tests.
Saying answers aloud helps memory more than reading them silently[24], and testing yourself beats re-reading[25]. Run the questions below in our free mock oral drill, then check yourself with the oral readiness check. DGS also runs a structured oral preparatory programme with the Company of Master Mariners of India[5]; batches may be grouped function-wise according to failure trends[1]. We are building an AI voice mock examiner that asks questions aloud, listens and follows up like an examiner; you can join early access. Read how our mock orals work first.
What kind of questions should you expect? 35 Function 2 practice questions
The questions below are written by us around the published syllabus and the codes; they are the kind of question to expect, not items from any exam paper.
They run from core to deeper to trap questions, with model answers, references and follow-ups. They do not repeat the samples on our second mate oral exam page. Pair them with Function 1 (navigation) and Function 3 (controlling the operation), and when you move up, see the chief mate cargo oral.
Oral practice
35 oral questions with model answers
Read the question, answer it out loud as if the examiner is across the table, then open the model answer and mark yourself honestly.
- 1
How do you prepare a hold to load a grain cargo?
Model answer points
- Holds must be grain-clean: swept, washed (fresh-water rinse if salt residues), dried, free of loose rust and scale, odour-free and insect-free.
- Bilge wells cleaned, bilge suctions tested, strum boxes clear and covered with burlap so grain cannot block them.
- Hatch covers tested weathertight (hose or ultrasonic test), seals and drains in good condition.
- Fire detection and fixed fire-extinguishing lines tested; lights isolated; ventilators working.
- Ship needs a document of authorisation under the Grain Code and grain stability calculations before loading.
- Expect a surveyor's hold inspection; record it in the log.
The examiner may follow up with- What is a grain-clean hold?
- Who issues the document of authorisation?
How did you do? - 2
What is the difference between ship's sweat and cargo sweat?
Model answer points
- Ship's sweat: moisture condenses on the cold ship's structure when the ship moves from a warm to a cold area while the hold air is warm and moist.
- Cargo sweat: moisture condenses on a cold cargo when the ship moves from a cold to a warm area and warm moist outside air reaches the cargo.
- Dew point rule: ventilate only if the dew point of the outside air is lower than the dew point of the air in the hold.
- Three-degree rule (for hygroscopic cargo): ventilate if the outside air temperature is at least 3 °C lower than the cargo temperature at loading.
- Record readings and ventilation in the log; damaged cargo leads to claims.
The examiner may follow up with- Which rule do you use for a hygroscopic cargo?
- How do you measure dew point on board?
How did you do? - 3
What are the IMDG classes?
Model answer points
- Class 1 explosives; Class 2 gases (2.1 flammable, 2.2 non-flammable non-toxic, 2.3 toxic).
- Class 3 flammable liquids.
- Class 4 flammable solids (4.1), substances liable to spontaneous combustion (4.2), substances which in contact with water emit flammable gases (4.3).
- Class 5 oxidising substances (5.1) and organic peroxides (5.2).
- Class 6 toxic (6.1) and infectious substances (6.2).
- Class 7 radioactive; Class 8 corrosive; Class 9 miscellaneous dangerous substances and articles.
- Marine pollutants carry the marine pollutant mark (fish and tree).
The examiner may follow up with- What does a UN number tell you?
- What is a limited quantity?
How did you do? - 4
Explain the IMDG segregation terms.
Model answer points
- Away from: effectively segregated so incompatible goods cannot interact dangerously in an accident; may be in the same hold or on deck with a minimum horizontal separation of 3 m.
- Separated from: in different holds when under deck; on deck at least 6 m apart horizontally.
- Separated by a complete compartment or hold from: a complete hold or compartment between them, vertically or horizontally.
- Separated longitudinally by an intervening complete compartment or hold from: vertical separation alone does not meet it.
- Read the requirement from the segregation table (by class) and the dangerous goods list entry; container ships use the separate container segregation table.
- Circular 07 lists IMDG segregation by name in the Function 2 syllabus.
The examiner may follow up with- Where do you find a substance's special segregation requirement?
- What is "segregation group"?
How did you do? - 5
What are EmS and MFAG, and how do you use them?
Model answer points
- EmS (Emergency Response Procedures for Ships Carrying Dangerous Goods): fire schedules (F-) and spillage schedules (S-), referenced against each UN number in the dangerous goods list.
- Example: a container leaks; find the UN number on the manifest, then its EmS code, then follow the spillage schedule (protective gear, wash down or contain, keep away from heat).
- MFAG (Medical First Aid Guide for Use in Accidents Involving Dangerous Goods): treatment for people exposed to the substance, with tables and the chemical's effects.
- Both must be on board for ships carrying DG; know where they are.
- Circular 07 names both under Function 2.
The examiner may follow up with- What does the F-A schedule mean?
- Who would you contact for medical advice?
How did you do? - 6
What does the IMSBC Code mean by Group A, B and C cargoes?
Model answer points
- Group A: cargoes that may liquefy if shipped at a moisture content above their transportable moisture limit (TML).
- Group B: cargoes with a chemical hazard that could cause a dangerous situation (for example coal, direct reduced iron).
- Group C: cargoes that are neither liable to liquefy nor chemically hazardous; some cargoes are both A and B.
- The shipper must give cargo information in advance: name, group, moisture content and TML certificate for Group A, and any chemical hazards.
- Each cargo has an individual schedule in the Code; follow it.
The examiner may follow up with- How old can a moisture certificate be?
- What is the flow moisture point?
How did you do? - 7
What is the TML and what is a can test?
Model answer points
- Flow moisture point (FMP): moisture content at which a flow state develops.
- Transportable moisture limit (TML): the maximum moisture content considered safe to carry; it is 90% of the FMP when the FMP is found by the flow table or penetration test (the Proctor/Fagerberg method sets the TML differently).
- Group A cargo may be loaded only if its actual moisture content is below the TML, supported by the shipper's certificate.
- Can test: a simple shipboard check: fill a can with a sample, tap it firmly on a hard surface many times; free moisture or a fluid surface suggests the cargo may be too wet.
- The can test only shows when to doubt the certificate; it does not prove a cargo is safe. If in doubt, stop loading and get proper testing.
The examiner may follow up with- What do you do if the can test fails?
- Give two examples of Group A cargoes.
How did you do? - 8
What is a Cargo Securing Manual and what does it contain?
Model answer points
- Required for ships carrying cargo units and cargo other than solid and liquid bulk; approved by the Administration.
- Contains the securing devices on board (fixed and portable), their maximum securing load (MSL), numbers and locations.
- Stowage and securing arrangements for standard and semi-standardised cargo, including container lashing patterns.
- Guidance for non-standard cargo and the method to calculate forces.
- Inspection and maintenance of securing equipment and records.
- Cargo must be stowed and secured in accordance with it throughout the voyage.
The examiner may follow up with- What is MSL?
- Who approves the manual?
How did you do? - 9
What is the verified gross mass (VGM) requirement for containers?
Model answer points
- SOLAS VI/2 requires the shipper to give a VGM for every packed container before loading.
- Method 1: weigh the packed and sealed container. Method 2: weigh all packages and contents and add the container tare mass.
- Required since 1 July 2016.
- A packed container must not be loaded without a VGM.
- Reason: misdeclared weights caused stack collapses, wrong stability and overstressed lashings.
The examiner may follow up with- Who is responsible for the VGM?
- What do you do with an obviously overweight container?
How did you do? - 10
Which cargo documents does a second mate handle?
Model answer points
- Mate's receipt: issued by the ship acknowledging the cargo received and its condition; remarks (clauses) are added for damage or shortage.
- Bill of lading: issued by the carrier; a receipt, evidence of the contract and a document of title; clauses on the mate's receipt are carried over.
- Cargo manifest: list of all cargo on board for customs and agents.
- Stowage plan: where each cargo is stowed.
- DG declaration and DG manifest for dangerous goods; cargo information from the shipper for bulk cargoes.
- Letters of protest when the terminal causes delays or damage.
The examiner may follow up with- Why must you clause a mate's receipt?
- What is a clean bill of lading?
How did you do? - 11
What does the BLU Code require before loading or unloading a bulk carrier?
Model answer points
- The ship and terminal agree a written loading or unloading plan before operations start, giving quantity per pour, sequence, ballast and expected draft and trim.
- The master gives the terminal the ship's information: stability, stress limits, deballasting rate, draft restrictions.
- The terminal gives information on loading rates, number of pours and air draft.
- Communication: agreed procedures to stop loading at once if needed.
- Monitor drafts and the loading instrument during operations; deviations need agreement and a revised plan.
- A ship/shore safety checklist is used.
The examiner may follow up with- Why must deballasting keep pace with loading?
- What is a trimming pour?
How did you do? - 12
How do you test hatch covers for weathertightness?
Model answer points
- Ultrasonic test: a transmitter inside the hold and a receiver run along the seals outside; a reading above the leak criterion (a set fraction of the open-hatch value, as the equipment maker states) shows a leak.
- Hose test: water from a hose at the seals while someone checks inside for leaks.
- Chalk test: chalk on the compression bar, close the cover, check that the rubber packing marks evenly.
- Check rubber packings, compression bars, cleats, drain channels and non-return valves, and cross-joint wedges.
- Record results and report defects before loading weather-sensitive cargo.
The examiner may follow up with- Why is a damaged compression bar dangerous?
- Can you load grain with a leaking hatch cover?
How did you do? - 13
What are the hazards of carrying coal and what precautions do you take?
Model answer points
- Coal can emit methane (flammable, explosive), can self-heat, and may be corrosive or deplete oxygen.
- Get the shipper's cargo information on methane and self-heating properties before loading.
- Gas detection: measure methane, oxygen and carbon monoxide and temperatures regularly through sampling points; log readings.
- Ventilation as the IMSBC schedule says: normally surface ventilation only; do not ventilate the cargo through its mass if self-heating is suspected.
- No smoking or naked lights; electrical equipment in holds must be safe or isolated; treat adjacent spaces as possibly gas-filled.
- Holds are enclosed spaces: entry only with a permit and testing.
The examiner may follow up with- What does a rising CO reading tell you?
- Why does oxygen fall in a coal hold?
How did you do? - 14
A heavy lift is to be loaded with the ship's crane. How does it affect stability, and what do you do?
Model answer points
- The moment the lift leaves the quay its weight acts at the crane jib head, so the ship's G rises at once: GM falls.
- With the jib outboard, the ship lists towards the lift; calculate it: tan(list) = (weight × distance from centreline) / (displacement × GM).
- Before lifting: check GM after the rise in G, fill or empty ballast to reduce list, avoid slack tanks (free surface), check mooring ropes and gangway.
- Clear the area, use guys, use a competent signaller and plan the lift in the SWL of the crane.
- After landing, the weight acts at its stowage position; secure it at once.
The examiner may follow up with- Why do mooring lines matter in a heavy lift?
- How do you find the KG of a suspended weight?
How did you do? - 15
What does the CSS Code rule of thumb say about securing cargo?
Model answer points
- CSS Code Annex 13 gives a simple check: the sum of the MSL values of the securing devices on each side of a cargo unit (port and starboard) should equal the weight of the unit.
- MSL is the maximum securing load of the device, given by the Cargo Securing Manual.
- This is a quick check, not a substitute for the advanced calculation where the manual requires it.
- Lashings should be angled correctly, tight, and checked during the voyage, especially before heavy weather.
- Record checks in the log.
The examiner may follow up with- What is the MSL of a shackle compared with its breaking strength?
- Why recheck lashings after the first day at sea?
How did you do? - 16
How do you carry timber deck cargo safely?
Model answer points
- Follow the Timber Code 2011 and the ship's approved manual; ships with timber freeboard need to meet the Load Line timber conditions.
- Stow compactly to the height allowed, without gaps, and secure with lashings (independent and continuous), uprights where required.
- Allow for water absorption and icing in stability calculations.
- Keep access to the crew's quarters, sounding pipes and vents clear; provide a safe walkway or lifelines over the cargo.
- Check lashings frequently at sea and tighten them; a list may come from absorbed water or a shifted stow.
The examiner may follow up with- Why does a timber-deck-cargo ship sometimes take a list at sea?
- What is a timber load line?
How did you do? - 17
What precautions apply when loading a high-density cargo such as iron ore or concentrates?
Model answer points
- High-density cargo fills a small volume, so weight is concentrated on the tank top: check the permissible tank top loading.
- Follow the loading plan and pour sequence to keep bending moments and shear forces within limits; check the loading instrument after each pour.
- Avoid excessive loading rate compared with deballasting.
- A low-volume stow makes the ship stiff (high GM) and gives violent rolling; plan alternate hold loading only if the ship is approved for it.
- For concentrates, check the moisture certificate against the TML (many are Group A).
- Circular 07 lists precautions for high-density cargoes under Function 2.
The examiner may follow up with- What is block loading?
- Why is a very large GM uncomfortable and dangerous?
How did you do? - 18
You find signs that a Group A cargo is liquefying during the voyage. What are the signs and what do you do?
Model answer points
- Signs: free water on the cargo surface, the cargo surface flattening or turning slushy, a slow list that does not go away, unusual ship motion.
- Inform the master at once.
- Reduce rolling: alter course and speed to ease motion; the master may seek a port of refuge.
- Do not try to pump water out of the cargo through the hold bilges without advice; check bilge soundings.
- Contact the company and flag; prepare for emergency (abandon ship if a sudden heavy list develops).
- Record everything; afterwards, the shipper's moisture certificate will be examined.
The examiner may follow up with- Why is liquefaction so dangerous to stability?
- Can trimming prevent liquefaction?
How did you do? - 19
What is the purpose of inert gas on a tanker, and what oxygen levels apply?
Model answer points
- Inert gas keeps the tank atmosphere non-flammable by keeping oxygen too low to support combustion.
- SOLAS and the FSS Code require cargo tanks to be kept with an oxygen content of not more than 8% by volume, and the inert gas system to deliver gas with not more than 5% oxygen.
- Tanks are kept at a positive pressure to stop air entering.
- Monitoring: fixed oxygen analyser, portable checks, deck water seal and non-return devices to prevent backflow of cargo gas.
- Before entry, tanks are gas-freed and tested: inert gas is an asphyxiant.
The examiner may follow up with- What is the deck water seal for?
- Why is purging done before gas freeing?
How did you do? - 20
Why is static electricity dangerous on a tanker and how is it controlled?
Model answer points
- Flowing oil, splashing, steam and water washing can generate static charge; a spark in a flammable atmosphere can cause an explosion.
- Control: inert atmosphere where fitted; low initial loading rate until the tank inlet is covered (ISGOTT guidance gives about 1 m/s in the branch line), no free-fall loading.
- Bond and earth equipment; no ungrounded objects (dipping tapes, sampling cans) lowered into a non-inerted tank of static accumulator cargo until a relaxation time has passed.
- Avoid steam injection into tanks with a flammable atmosphere.
- Ship-shore insulating flange in the cargo hose string to prevent stray current arcs.
The examiner may follow up with- What is a static accumulator oil?
- Why use an insulating flange instead of a bonding cable?
How did you do? - 21
Where do you look for damage and corrosion when inspecting a ballast tank?
Model answer points
- Coating condition first: described as good, fair or poor; breakdown starts at edges, welds and areas hard to coat.
- Upper parts of the tank under the deck (warm, wet, oxygen): heavy corrosion.
- Structural intersections: brackets, frame ends, hopper knuckles and bulkhead stools, where cracks start.
- Pitting on horizontal surfaces where water and mud lie.
- Damage from impacts (grabs, bulldozers) on the hold side may show inside the tank as buckling or cracks.
- Record and photograph findings, report to the master for the company and class; inspection is an enclosed-space entry with a permit.
The examiner may follow up with- What is PSPC?
- How do you take a thickness reading?
How did you do? - 22
What is the Enhanced Survey Programme and why does it exist?
Model answer points
- The ESP is an enhanced programme of surveys for bulk carriers and oil tankers, required by SOLAS XI-1/2 and given in the ESP Code.
- It exists because of losses of bulk carriers and tankers from structural failure and corrosion.
- It includes close-up surveys, thickness measurements and tank testing, increasing with ship age.
- A survey report file and supporting documents are kept on board.
- Ship's officers support it by regular inspection of cargo holds and ballast tanks and reporting defects.
- Circular 07 asks for an understanding of its purpose under Function 2.
The examiner may follow up with- What is a close-up survey?
- Who keeps the survey report file?
How did you do? - 23
How do you prepare reefer cargo and reefer containers for loading?
Model answer points
- Check the carriage instructions: set temperature, ventilation, humidity, and whether it is chilled or frozen.
- Pre-cool holds or check reefer containers' power supply and alarms before loading; check cargo temperature at loading.
- Do not load warm cargo into a cold space without instructions; it will cause condensation and spoilage.
- Monitor and record temperatures during the voyage at the required intervals; report alarms and failures at once.
- For containers: plug in promptly, check set point against the manifest, keep logs for claims.
The examiner may follow up with- What is controlled atmosphere?
- Why is temperature logging vital in a claim?
How did you do? - 24
A container is reported leaking a dangerous substance on deck. What do you do?
Model answer points
- Raise the alarm, keep people upwind and away; inform the master.
- Identify the substance from the DG manifest and stowage plan: UN number, class, EmS code.
- Follow the EmS spillage schedule: protective clothing, breathing apparatus if needed, contain or wash overboard only if the schedule and MARPOL allow.
- Consider altering course to put the wind on the leak side away from accommodation.
- Use MFAG for any exposed crew; seek radio medical advice.
- Report to the company and, if pollution, to the coastal State.
The examiner may follow up with- Which annex of MARPOL covers packaged harmful substances?
- Who decides to jettison a container?
How did you do? - 25
How is grain prevented from shifting, and what is a document of authorisation?
Model answer points
- Grain settles and shifts, creating a heeling moment, so the Grain Code limits the assumed grain heeling moment against the ship's stability.
- Holds filled and trimmed to fill spaces under decks and hatch covers as far as possible; partly filled holds secured (overstowing, strapping or saucers) where required.
- The ship needs a document of authorisation and an approved grain loading manual; without it, grain loading is restricted.
- Stability must meet the Grain Code criteria, checked by calculation before loading.
- The chief mate does the calculations; the second mate must understand trimming and securing.
The examiner may follow up with- What is a filled compartment, trimmed?
- Who issues the document of authorisation?
How did you do? - 26
What is ullage and how do you measure cargo quantity on a tanker?
Model answer points
- Ullage is the space from the reference point at the top of the tank to the liquid surface; sounding is the depth of liquid.
- Measure ullage (closed gauging on inerted ships), cargo temperature and water dip (interface).
- Correct ullage for trim and list using tank tables, then find the observed volume.
- Correct to standard temperature (volume correction factor), subtract free water, then convert to weight using density.
- Compare ship's figures with shore figures; a large difference needs a letter of protest.
The examiner may follow up with- What is the vessel experience factor?
- Why use closed gauging?
How did you do? - 27
What are the main hazards of tank cleaning?
Model answer points
- Flammable atmosphere: washing creates mist and static; wash only under inert gas or controlled conditions as ISGOTT describes.
- Toxic gases such as hydrogen sulphide and benzene from some cargoes.
- Oxygen deficiency in inerted tanks.
- Pollution: slops go to the slop tank and are discharged only within MARPOL Annex I limits.
- Entry hazards: tanks are enclosed spaces; entry only after gas-freeing, testing and a permit.
- Record operations in the Oil Record Book Part II.
The examiner may follow up with- What is crude oil washing?
- Why must slops settle before decanting?
How did you do? - 28
You are on cargo watch on a bulk carrier and the terminal is loading faster than the agreed plan. What do you do?
Model answer points
- Check drafts, the loading instrument and the ballast pumping rate; see whether stresses or trim are leaving the plan.
- Inform the chief officer at once.
- Ask the terminal to reduce the rate or stop using the agreed stop procedure (BLU Code).
- If stresses are near limits, stop loading until the plan is revised and agreed.
- Record times, rates and communications; issue a letter of protest if the terminal does not follow the plan.
The examiner may follow up with- What happens to the hull if deballasting lags loading?
- Who has authority to stop loading?
How did you do? - 29
How do you stow and secure containers on deck?
Model answer points
- Stow by the stowage plan within stack weight and height limits; heavy containers lower; check the lashing software or Cargo Securing Manual.
- Secure with twistlocks (or semi-automatic locks), lashing rods and turnbuckles, bridge fittings where used.
- Check that twistlocks are locked, lashings are tight and turnbuckles are secured.
- Account for parametric and synchronous rolling risks; follow weather routing in heavy weather.
- Recheck lashings after departure and before heavy weather; record checks.
- Losses of containers are now reportable to nearby ships, the coastal State and the flag State.
The examiner may follow up with- What is parametric rolling?
- Why must DG containers be accessible?
How did you do? - 30
Trap: the moisture certificate shows moisture content equal to the TML. Can you load the Group A cargo?
Model answer points
- No. The moisture content must be below the TML; at the TML the cargo is at the limit.
- Ask for re-testing and do a can test; inform the master and the company.
- Some cargoes may be carried above the TML only in specially constructed or fitted ships approved for it, under the IMSBC Code; ordinary bulk carriers cannot.
- Also check the age of the certificate against the IMSBC Code limits.
- The master has the right to refuse cargo that is not safe.
The examiner may follow up with- What is a specially constructed cargo ship?
- What if the agent pressures you to load?
How did you do? - 31
Trap: a container has no VGM but the shipper's declared weight is on the booking. Can you load it?
Model answer points
- No. SOLAS VI/2: a packed container shall not be loaded unless the master or representative and the terminal have the VGM.
- A booking weight is not a verified gross mass.
- The terminal can weigh it (Method 1) or the shipper can provide a VGM.
- Record the refusal and inform the planner.
The examiner may follow up with- Who may obtain the VGM on the shipper's behalf?
- What tolerance is accepted?
How did you do? - 32
Trap: you are carrying a cold cargo from a cold port into the warm, humid tropics. Should you ventilate the holds hard?
Model answer points
- No. Warm, moist outside air would meet the cold cargo and condense on it: cargo sweat.
- Under the dew point rule, ventilate only when the outside dew point is below the hold dew point; here it usually is not.
- Keep the hold closed (or minimal ventilation) until the cargo warms up.
- Record the readings so you can show you followed the rule if there is a claim.
The examiner may follow up with- When would you ventilate in this voyage?
- What is the opposite case?
How did you do? - 33
Trap: a cargo of coal is self-heating. Should you open the hatches and ventilate through the cargo to cool it?
Model answer points
- No. Ventilating through the cargo supplies oxygen and can make self-heating worse or start a fire.
- Close the hold, keep only surface ventilation if the IMSBC schedule allows, or seal it.
- Monitor temperature, carbon monoxide and methane; inform the master and the company; seek expert advice.
- Prepare fire-fighting but do not use water without advice (steam and gas can result); the master may divert.
- Keep people out of the hold: it is an enclosed space with toxic and flammable gas.
The examiner may follow up with- What does rising CO with falling O2 mean?
- When would CO2 flooding be used?
How did you do? - 34
Trap: two dangerous goods require "separated from". Can they go in the same hold if they are 6 m apart?
Model answer points
- Under deck, no. "Separated from" means in different compartments or holds when stowed under deck.
- The 6 m horizontal distance applies on deck.
- "Away from" is the term that allows the same hold with 3 m horizontal separation.
- Check the container segregation table for container ships, which works differently by bays and stacks.
- Read the requirement from the IMDG Code, not from memory.
The examiner may follow up with- What does "separated by a complete compartment" mean?
- How is segregation applied in closed containers?
How did you do? - 35
Trap: a hold has been inerted by the fumigation of grain. Can a crew member go down for a quick look if the hatch is open?
Model answer points
- No. A fumigated hold is an enclosed space with toxic gas, even with the hatch open.
- Entry only after the fumigator or a competent person certifies it gas-free, with atmosphere testing for oxygen and the fumigant, and an entry permit.
- Under the IMO enclosed space recommendations, single-person entry is not permitted.
- Keep warning notices on the access; monitor adjacent spaces and the accommodation.
- Follow the IMO recommendations on fumigation and the IMSBC Code.
The examiner may follow up with- Which gas detectors would you use?
- Who must stay on board during in-transit fumigation?
How did you do?
Reading answers is not the same as saying them. Our AI voice examiner asks these out loud, listens to your answer, asks the follow-up and marks you against the rule. Join early access or try the free timed mock oral drill.
Frequently asked questions
What is Function 2 in the second mate oral?
Function 2 is Cargo Handling and Stowage at the operational level from STCW Table A-II/1. It covers monitoring loading, stowage, securing, care and unloading of cargo, and inspecting and reporting damage to cargo spaces, hatch covers and ballast tanks.
Which codes should I study for the Function 2 oral?
Circular 07 of 2026 names ISGOTT, the CSS Code, the Timber Code, the Cargo Securing Manual, the IMDG Code with MFAG and EmS, the IMSBC and BLU Codes and the Grain Code.
I have sailed only on tankers. Will I be asked about bulk and containers?
Yes, expect it. The oral covers the whole function, so a tanker officer can be asked about grain, IMDG segregation or container lashing. Prepare at least one cargo of each main type.
How much is the Function 2 oral fee?
The MS (STCW) Rules 2014 fee schedule sets ₹1,000 for the oral of each second mate function. Fees are not refunded.
Can I take the Function 2 oral before Function 1?
Yes. Since July 2024 you may book any function's oral on its own, as long as that function's written is booked, awaiting result or passed.
How long is the Function 2 oral?
No official length has been published that we could find. Plan for a full viva with follow-ups rather than a fixed number of minutes.
Is stability asked in the Function 2 oral?
Stability as it relates to cargo is: heavy lifts, grain shifting, high-density cargo and liquefaction. The stability criteria themselves belong to Function 3.
What is the most common trap in Function 2?
Loading a Group A cargo at or near its TML, ventilating a cold cargo in warm humid air, and confusing IMDG segregation terms are the traps we see most.
Do I need to know the latest IMDG amendment?
It helps. Amendment 42-24 became mandatory on 1 January 2026. Examiners like candidates who know which edition is in force.
How do I prepare for Function 2 in a month?
One week each on general cargo and securing, dangerous goods, bulk cargo and grain, and tankers with inspection. Finish with two mock orals.
What happens if I fail Function 2?
You re-book the Function 2 oral after at least a one-month gap and pay the fee again. You may also apply on Form 31 within 30 days for a review by a different examiner.
Are these questions from the MMD exam?
No. We write them around the published syllabus and the codes. They show the kind of question to expect.
Sources 25 documents
Each number in the text links to the source below. Labels show the type of source; see our editorial policy.
- Official DGS Circular No. 07 of 2026 (NT Exam Circular No. 01 of 2026), Preparatory Course for Oral Examination leading to Nautical Grade CoC, 21 Feb 2026 · 21 February 2026
- Official DGS EAC Branch, Revised Time Table for November 2026 written examinations (2M FG, 1st Mate Ph-II, ASM, NWKO), 9 Oct 2026 · 9 October 2026
- Official Merchant Shipping (Standards of Training, Certification and Watch-keeping for Seafarers) Rules, 2014, G.S.R. 546(E), Gazette of India, 30 July 2014 · 30 July 2014
- Official DGS Notice F.No. 25-13011/11/2022-NT-DGS: booking for written and all oral examinations, May 2026 (27 Mar 2026) · 27 March 2026
- Official DGS Circular No. 07 of 2026 (NT Exam Circular No. 01 of 2026): Preparatory Course for Oral Examination leading to Nautical Grade CoC · 21 February 2026
- Official N.T. Wing/EAC Branch Nautical Circular No. 16 of 2024, 1 Jul 2024 · 1 July 2024
- Official DGS (NT/Exam) Circular 13 of 2022, 16 Jun 2022 · 16 June 2022
- Official NT Exam Circular No. 12 of 2022, 15 Jun 2022 · 15 June 2022
- Official STCW/CONF.2/34 Attachment 2: 2010 Manila amendments to the STCW Code, Part A Introduction · 25 June 2010
- Official DGS Notice dated 10 May 2021, Annexure I: Instructions to candidates for attending nautical oral examinations using online video-conferencing platform · 10 May 2021
- Research Dunlosky et al. (2013) Improving Students' Learning With Effective Learning Techniques · 1 January 2013
- Official DGMA Notice: Commencement of Seat Booking for Nautical Grade Competency Examinations, November 2026 (22 Oct 2026) · 22 October 2026
- Official DGS Notice F.No. 25-13011/11/2022-NT-DGS: booking for written and all grades of oral examinations for May 2026 · 27 March 2026
- Official DGS Notice: Operationalisation of New Examination Portal, 22 May 2026 · 22 May 2026
- Official DGS Notice: Operationalisation of Oral Examination Booking on New Examination Portal (26-05-2026) · 26 May 2026
- Official DGMA Notice: Commencement of Seat Booking for Nautical Grade Competency Examinations – October 2026 · 20 September 2026
- Official DGS Notice dated 1 Jun 2026: oral booking on new e-Examination Portal · 1 June 2026
- Official DGMA Nautical EAC Advisory, 31 Jul 2026 · 31 July 2026
- Official DGMA Nautical Wing latest news: 2026 written examination timetables and result notices · 9 October 2026
- Official DGMA Nautical Wing: Nautical Examinations
- Official MCA MIN 715 (M) Carriage of cargoes: IMSBC Code 07-23 and IMDG Code 42-24 · 4 December 2024
- Official IMO Resolution MSC.550(108) (adopted 23 May 2024) · 23 May 2024
- Reported UK P&I Club – IMO regulatory update 2026 · 1 January 2026
- Research MacLeod et al. (2010) The production effect: Delineation of a phenomenon · 1 May 2010
- Research Roediger & Karpicke (2006) Test-Enhanced Learning, Psychological Science · 1 March 2006