NautemyCoC orals · exams · job testsEarly access
Exam guide36 min readJump to 37 questions

MEO Class 4 oral questions and answers, function by function (Functions 3, 4, 5 and 6)

These MEO Class 4 oral questions are 37 examiner-style questions with model answers, grouped by STCW function: marine engineering, electrical, maintenance and repair, and ship operation. Each function oral, or one combined oral, needs 60% to pass.

On this page
  1. Key facts
  2. What questions are asked in the MEO Class 4 oral?
  3. How is the MEO Class 4 oral split by function?
  4. What topics does each MEO Class 4 function oral cover?
  5. How does the MEO Class 4 syllabus turn into oral questions?
  6. How is the MEO Class 4 function oral conducted?
  7. What happens on MEO Class 4 oral day?
  8. What do MEO Class 4 examiners probe hardest?
  9. What do weak and strong MEO Class 4 answers sound like?
  10. Why do candidates fail MEO Class 4 function orals?
  11. How should you structure an answer in the MEO Class 4 oral?
  12. What situational questions come up in the MEO Class 4 oral?
  13. How should you prepare for the MEO Class 4 orals in four weeks?
  14. How do you book or rebook an MEO Class 4 function oral?
  15. If you fail an MEO Class 4 function, what next?
  16. What should you bring to the MEO Class 4 oral?
  17. What changed for the MEO Class 4 oral in 2026?
  18. Where can you practise MEO Class 4 oral questions out loud?
  19. MEO Class 4 oral questions with model answers
  20. 37 practice questions
  21. Frequently asked questions
  22. Sources

Key facts

Certificate
MEO Class IV, STCW III/1, 750 kW or more[1]
Oral split
One oral per function (3, 4, 5, 6) or one combined oral[2]
First attempt
Choose any number of functions[3]
Pass mark
60% in each oral[4]
Panel
Two examiners, face-to-face at the MMD[5]
Question levels
Basic, operational, responsible (about 1:6:3)[6]
Fee
Charged per function[3]
From 1 Jan 2027
4-week prep course mandatory for first-timers[7]

Checked 14 November 2026. Fees and rules change: confirm with the authority before you book.

What questions are asked in the MEO Class 4 oral?

The MEO Class 4 oral asks how you run, maintain and protect the machinery you watched as a junior engineer, tested function by function: marine engineering, electrical, maintenance and repair, and safety and environment.

Part B of the MEO Class IV exam has written papers and an oral in four STCW functions[8]. You can take the orals one function at a time or as one combined oral[2], and you need at least 60% in each oral[4]. This page gives you 37 practice questions in examiner style with model answers, grouped by function, plus a four-week plan. They are written by us around the published syllabus and the regulations; they are not questions from any real paper.

Start with the parent guide, MEO Class 4 oral exam, for eligibility and booking. Use this page to drill the questions. When you can answer them out loud without notes, try a timed session in our mock oral drill.

How is the MEO Class 4 oral split by function?

The MEO Class 4 oral is split into four STCW functions, each with its own oral, and you may book them separately or as one combined oral.

DGMA's engine wing records orals per function: its FAQ describes a candidate who passed the MEO-IV oral for Function 5 (electrical) on its own[9]. A fresh candidate can choose how many functions to take at the first attempt[3]. Fees are charged per function, so the MEK General fee also covers MEK Motor, and the Ship Construction and Stability fee also covers SSEP[3]. The examiner guidelines say a combined oral covers all of Functions 3, 4, 5 and 6, and a failure is recorded against the function concerned so you resit only that one[10].

The function numbers come from the STCW functions in STCW Code Table A-III/1 at operational level; the Code groups competence into seven functions across deck and engine[11]. DGMA's 2026 preparatory syllabus uses the same numbering[12].

MEO Class IV Part B: functions, papers and orals (paper titles from the November 2026 timetable)
FunctionSTCW nameWritten paper(s) behind itOral
Function 4Marine engineering at the operational levelMEK General; MEK Motor or MEK SteamSeparate oral (or part of combined)
Function 5Electrical, electronic and control engineeringMarine Electro TechnologySeparate oral
Function 6Maintenance and repairMarine Engineering PracticeSeparate oral
Function 3Controlling the operation of the ship and care for persons on boardShip Construction and Stability; Ship Safety and Environmental ProtectionSeparate oral
All fourCombined oralAll Part B papersOne sitting; failures recorded per function

What topics does each MEO Class 4 function oral cover?

Each function oral covers the subjects of its written papers, at the depth of a fourth or third engineer who must keep the plant safe on watch.

The 2026 preparatory syllabus is the best published map. It adds alternative-fuel awareness under Function 4, PLCs and basic cyber hygiene under Function 5, measuring tools, welding, heat treatment and planned maintenance under Function 6, and ballast water systems, blackout restoration and emergency steering under Function 3[13]. Expect these newer items to come up.

MEO Class 4 oral topics by function, mapped to our study pages
FunctionSubjects examiners commonly ask aboutStudy pagesMCQ practice
4: Marine engineeringTwo-stroke and four-stroke cycles, turbochargers, fuel and lube oil systems, starting air, purifiers, boilers, fresh water generator, refrigeration, UMS watchkeepingTwo-stroke main engine, auxiliary diesel engines, turbochargers, air compressors and starting air, marine boilers, fresh water generator, refrigeration and AC, engine room watchkeepingMain engine MCQ, boilers MCQ, refrigeration MCQ, turbochargers MCQ
5: Electrical, electronic and controlThree-phase supply, insulated neutral, motor starters, insulation testing, emergency power, alarms, slowdowns and shutdownsMarine electrical systems, emergency generator, UMS and automationMarine electrical MCQ
6: Maintenance and repairBearing clearances, measuring tools, pump and injector overhauls, coolers, tie-rods, hot work, materials and weldingPumps and pumping systems, heat exchangers and cooling, fuel injection and governors, steering gearPumps and purifiers MCQ, fuel injection MCQ
3: Controlling the operationStability basics, fire-fighting and fixed CO2, MARPOL Annex I, IV and VI, ballast water, flooding, rest hoursFire-fighting, engine room fire systems, MARPOL, oily water separator, ballast water management, ship stabilityMARPOL MCQ, engine pollution prevention MCQ, fire-fighting and LSA MCQ

How does the MEO Class 4 syllabus turn into oral questions?

The MEO Class IV preparatory syllabus (mandatory from 1 January 2027) and the examiner guidance's own sample questions show what is asked[12][13][10].

MEO Class 4: syllabus-to-question map
Syllabus item (official source)What the examiner is checkingTypical opening question (our wording)Likely follow-upWhere to revise
F4: Rankine cycle (guidance sample)Basic theory"Sketch the Rankine cycle.""How does superheating improve efficiency?"Marine boilers
F4: bottom-end bearing clearance (sample)Practical measurement"How do you measure bottom-end bearing clearance?""What if it is above the limit?"Auxiliary diesel engines
F4: why a turbocharger (sample)Principle"Why does an engine need a turbocharger?""What happens at low load?"Turbochargers
F4: overspeed trip (sample)Safety device"When does the overspeed trip act?""How is it tested?"Fuel injection and governors
F4: alternative-fuel awarenessMethanol, ammonia, hydrogen hazards"What makes ammonia dangerous as a fuel?""How is a leak detected?"Dual-fuel and LNG engines
F4: purifiers, compressors, FWGOperation and faults"Purifier loses its seal. Why?""How do you set the gravity disc?"Fuel oil purifiers
F5: PLCs and cyber hygieneInputs, outputs, safe practice"What is a PLC?""Why no personal USB on the ECR PC?"UMS and automation
F5: generators and switchboardsParalleling, preferential trips"What is a preferential trip?""How do you parallel?"Marine electrical systems
F6: measuring tools, machine tools, weldingPractical workshop skill"How do you use a micrometer and check it?""Precautions before welding near a tank?"Pumps and pumping systems
F6: PMS and condition monitoringRecords, trends"What is condition monitoring?""Which parameters do you trend?"Lubrication and oil analysis
F3: BWMS, blackout restoration, emergency steeringEmergency and environmental duties"Restore power after a blackout.""Change over to emergency steering."Ballast water management, steering gear
F3: ship safety and environmentOWS, fire, enclosed spaces"Run the OWS and explain the 15 ppm alarm.""Who signs the Oil Record Book?"Oily water separator

How is the MEO Class 4 function oral conducted?

It is a one-to-one, face-to-face oral at the MMD, before one external and one internal examiner or two internal examiners[5].

The examiners question at three levels, basic, operational and responsible, in a suggested ratio of about 1:6:3, keep the oral independent of your written papers and decide the result jointly[6]. Their guidelines also encourage them to refer to your TAR book and the competences in it[10], so know what you signed off. You may be told your result at the centre, but it becomes final only after the Chief Examiner of Engineers approves it[14].

No length for a function oral is published. If you take the combined oral, expect a long sitting and pace yourself. Read what to expect at the MEO Class 4 oral for a walk-through of the day.

What happens on MEO Class 4 oral day?

Engine orals are face-to-face at the MMD, one candidate at a time[5].

MEO Class 4 oral day: timeline (rules cited; the rest is our advice)
WhenWhat happensWhat to have or do
Week beforeRe-read your TAR book, testimonials and last ship's particularsExaminers are encouraged to refer to your TAR book and not to base the oral on your written papers[10]
MorningReport to the MMD; one candidate is examined at a timeOne external and one internal examiner, or two internal[5]
OpeningYour last ship and your watchKnow power, engine type, generators, boilers, automation
CoreYour own ship's systems, basic theory and operational procedures[10]Answer: safe action, reason, check, report
Safety question you cannot answerAn alternate safety question of equal importance should follow[10]Say so plainly; do not bluff
EndThe examiner may tell you the result[14]Final only after the Chief Examiner of Engineers approves[4]
2-3 working days laterOral result on the portal[9]Check before booking anything else

What do MEO Class 4 examiners probe hardest?

Examiners probe whether you understand why the plant works the way it does and can act safely when it goes wrong, not whether you can recite a book.

DG Shipping's guidelines for MEO orals list six things the oral tests: your understanding of an incident or procedure, knowledge of equipment and systems, logical analysis of a sequence, clarity of expression, your reaction to an adverse situation, and your evaluation of a process[10]. Questions can come directly, indirectly or as a leading question. The same guidelines give sample questions such as sketching the Rankine cycle, measuring bottom-end bearing clearance, why a turbocharger is needed and when the overspeed trip acts, and at operational level dismantling a crosshead bearing, signs of low gas or air in a refrigeration plant, and tie-rod tightening order[10]. We have written our own versions of these into the question set below.

Safety questions carry special weight. If you cannot answer a safety question, the examiner is told to ask you another safety question[10]. A weak answer on fire, flooding, enclosed spaces or pollution therefore costs more than a gap on, say, gear ratios.

  • Function 4: sequences (start, stop, change over), causes and remedies, and the trips that protect each machine.
  • Function 5: safe isolation, motor starting, insulation and the emergency supply.
  • Function 6: how you measure, what limits you compare with, and what you record.
  • Function 3: what the regulation says, with the number, and what you do first.

What do weak and strong MEO Class 4 answers sound like?

Class 4 examiners mostly ask operational questions, about six in ten in the suggested 1:6:3 ratio[6], and expect your own ship's practice.

Examiner's note: "Restore power after a blackout." Weak: "Start the generator." Strong: inform the bridge and chief engineer, confirm the emergency generator is supplying the emergency board, find the cause (fuel, overload, a trip), start a standby generator, close the breaker, restore essential services in order (steering, lubrication and cooling pumps), then main engine services, and log it.

Examiner's note: "Measure bottom-end bearing clearance." Weak: "Use feeler gauge." Strong: permit and isolation, turning gear engaged and the starting air shut and vented, crankcase ventilated before entry, then the measurement method used on your engine (feeler gauge or lead wire as the maker specifies), comparison with the maker's limits, and the record.

Examiner's note: "The 15 ppm alarm sounds on the OWS." Weak: "Stop the pump." Strong: the discharge must stop automatically and recirculate or return to the bilge tank; the candidate checks why (emulsion, detergent, overload of the separator), cleans or flushes, records it in the Oil Record Book, and never bypasses the monitor.

Why do candidates fail MEO Class 4 function orals?

Most failures come from rote answers that collapse when the examiner asks why, and from weak safety answers.

A DGMA technical committee found that many entry-level candidates sit the CoC exams without structured revision, that rote learning fails candidates in orals where fundamental understanding is tested, and that many need several attempts[15]. That is why a one-month preparatory course becomes mandatory for first-time candidates from 1 January 2027[7].

Common reasons we see:

  • No sketch. Examiners ask you to draw systems. Practise the fuel, lube oil, cooling water, starting air and bilge systems until you can draw them in two minutes.
  • Guessing numbers. If you are not sure of a figure, say how you would find it (maker's manual, SMS, class rules). A wrong number on a safety limit hurts more than an honest gap.
  • Skipping the first action. In any emergency start with alarm, inform, make safe.
  • Not knowing your own ship. You will be asked about your last vessel: engine model, generator rating, boiler type.
  • Booking all four functions before you are ready. You can split them; a pass in any subject is kept[16].

Our guide to why seafarers fail oral exams has more examples.

How should you structure an answer in the MEO Class 4 oral?

Give the direct answer in one sentence, then explain in a logical order, then close with the safety point or the record you keep.

A simple frame works for most engine questions:

  1. What it is or what you do first (one line).
  2. How it works or the sequence (three to five steps, ideally with a quick sketch).
  3. What can go wrong and how you notice it (alarms, readings, smells, sounds).
  4. Safety and regulation (permit, isolation, rule number).
  5. Record and report (PMS, ORB, log, chief engineer).

For situational questions, add who you tell and when. Our guide on how to answer oral exam questions shows worked examples, and what oral examiners look for explains the marking mindset.

What situational questions come up in the MEO Class 4 oral?

Situational questions put you on watch, give you a symptom, and test your first actions and your reasoning.

Practise these set-ups aloud. For each, say what you check first, the likely causes in order, what you do, and who you inform.

  • The bridge rings: the main engine will not start on bridge control. (Control air, start air pressure, turning gear interlock, local control.)
  • One generator's exhaust temperatures rise and the frequency dips under load. (Fuel, governor, overload, air.)
  • The purifier sludge discharge alarm keeps sounding. (Operating water, seals, bowl.)
  • The bilge high-level alarm sounds twice in an hour. (Source of water, pumps, logs.)
  • Smoke from a switchboard cubicle. (Isolate, CO2 extinguisher, power to essential services.)
  • A crew member is found unconscious in the purifier room. (Raise alarm, do not enter alone, breathing apparatus, rescue team. See enclosed space entry.)

The emergency procedures page covers fire, flooding and blackout drills in detail.

How should you prepare for the MEO Class 4 orals in four weeks?

Spend one week per function, with daily spoken answers and two mock orals, if you already passed the written papers.

This plan assumes you are within a few weeks of your oral date. If you have more time, use the 10-week plan on the MEO Class 4 oral exam page or the 30-day oral preparation plan. From 1 January 2027 first-time candidates must also complete the mandatory four-week preparatory course of 120 contact hours[12]; see the 2027 prep course answer.

Four-week MEO Class 4 oral plan, one function per week
WeekFunction focusDaily workEnd-of-week check
1Function 4: main engine, auxiliary engines, turbochargers, fuel and starting air, boilers, refrigeration, FWGDraw two systems a day from memory; answer 8 questions from this page aloud; read your engine manual's alarm listMock oral on Function 4 with a friend or our mock oral drill
2Function 5: supply system, motors and starters, insulation, emergency power, alarms and shutdownsSingle-line diagram of your last ship; starter circuits; SOLAS emergency power numbersExplain the emergency supply in 3 minutes without notes
3Function 6: measurements, overhauls, materials, welding, PMSWalk through two overhauls a day step by step, with limits and recordsOverhaul talk-through recorded on your phone, then reviewed
4Function 3 plus revision: fire, CO2, flooding, MARPOL Annex I, IV, VI, BWM, rest hoursRegulation numbers and limits; emergency first actions; revisit weak answers from weeks 1-3Full combined mock; check your score with the oral readiness check

How do you book or rebook an MEO Class 4 function oral?

You book each function oral on the DGMA examination portal and pay through Bharatkosh; a failed function is rebooked on its own.

Eligibility assessment and seat booking for all engine grades are done only on exams.dgma.gov.in[17], with fees paid through the Bharatkosh gateway; do not pay twice unless the portal shows a failed transaction[17]. From November 2026 MEO Class IV written seats are booked at your parent MMD first[18].

Once you book, the month cannot be changed online. If you do not appear you are marked 'Failed (Absent)' and must book and pay again, though an MMD may reschedule an oral within the month in a genuine, documented case[3]. To challenge a result, apply on Form 31 under Rule 77 within 30 days to the MMD where you took the exam[3]. The full process is on our MMD exam booking page.

If you fail an MEO Class 4 function, what next?

Each Class 4 function oral costs Rs 1,000 under the 2014 schedule[19]; one fail and one pass: 2 x Rs 1,000 = Rs 2,000.

MEO Class 4: failure and re-sit scenarios
ScenarioRuleWhat to do nextFee (2014 schedule)
Failed one function oralPassed subjects are kept; failure recorded by function[16][10]Book only that function in a later windowRs 1,000[19]
Failed one function in a combined oralYou re-sit only the failed function[10]Separate function oral; examined only on that functionSame per-function fee
Booked, did not appear"Failed (Absent)"; month cannot be changed online; MMD may reschedule within the month in documented genuine cases[3]Book and pay againFee lost
First attempt on or after 1 Jan 2027, or none in 2026One-month preparatory course mandatory[7]Finish the 120-hour course first[12]Course fee set by the institute
Result seems wrongForm 31 within 30 days[3]Review at the MMD where you sat[20] Rs 6,000 operational / Rs 15,000 management
No exam within a year of assessmentRe-assessment needed[3]File a new EARs 3,000

What should you bring to the MEO Class 4 oral?

Bring your admit card, photo identity and the originals the MMD asks for, plus your TAR book, because examiners may refer to it.

Use the MMD exam documents checklist to prepare the file, and the oral exam day checklist for the morning itself. Also bring a pen and be ready to sketch: most engine examiners will ask you to draw at least one system.

What changed for the MEO Class 4 oral in 2026?

The big 2026 changes are a mandatory preparatory course from 2027, two new exam centres, the new portal and new pathways for ETOs and endorsements.

2026 changes affecting MEO Class 4 orals
ChangeWhat it means for your oralSource
Preparatory course mandatory from 1 Jan 2027First-timers (and those who did not sit in 2026) must do a 4-week offline course before sitting[7]
New course syllabusAdds alternative fuels, PLCs, cyber hygiene, BWMS and blackout restoration to what examiners expect[13]
Kandla becomes a Class IV centreSeventh assessment centre from November 2026[21]
New examination portalJune 2026 engine exams were the first booked only on exams.dgma.gov.in[22]
ETO to MEO Class IV pathwayETOs can qualify after a bridging course; Function 5 is exempt[23]
Motor/steam endorsement oralClass I or II holders can take the Class IV oral only for the other endorsement after a simulator course[24]

Where can you practise MEO Class 4 oral questions out loud?

Practise out loud with a partner, record yourself, or use a mock-oral tool that asks follow-ups the way an examiner does.

Our free mock oral drill runs through questions like the ones below. We are also building an AI voice mock examiner that asks questions aloud, listens and follows up; you can join the early access list. For written-style revision, use the auxiliary engines MCQ and steering gear MCQ banks, and the book list in books for MEO Class 4. If you are moving up later, compare the next step on MEO Class 4 vs Class 2 and the MEO Class 2 oral questions.

MEO Class 4 oral questions with model answers

Below are 37 questions written by us in the style examiners use, grouped by level: core, deeper, then trap questions. They are not taken from any real exam. Each answer gives the key points an examiner wants first, the rule behind it, and the follow-ups to expect.

Read the question, answer it aloud, then compare. If you are also preparing for job interviews, many of these overlap with third engineer interview questions.

Oral practice

37 oral questions with model answers

Read the question, answer it out loud as if the examiner is across the table, then open the model answer and mark yourself honestly.

–0/37 done
  1. 1
    CoreMEK Motor syllabus, Function 4 (DGMA Circular 49 of 2026)

    Walk me through how a two-stroke uniflow-scavenged main engine completes one cycle.

    Model answer points
    • One cycle takes one revolution: compression and power on the upstroke and downstroke; there is no separate intake or exhaust stroke.
    • Near the bottom of the stroke the piston uncovers the scavenge ports in the liner. Air from the scavenge receiver enters and pushes the burnt gas upward and out through the exhaust valve in the cover. That one-way flow is why it is called uniflow.
    • The exhaust valve closes, then the piston covers the ports. Compression of the trapped air raises its temperature well above the fuel's self-ignition point.
    • Fuel is injected just before top dead centre. It ignites, pressure peaks and the power stroke pushes the piston down until the exhaust valve opens again.
    • Give the examiner the reason for the design: uniflow scavenging gives better scavenge efficiency than loop scavenging on long-stroke engines.
    • Link it to your ship: name the engine make and model you sailed on and its scavenge air pressure at sea speed.
    The examiner may follow up with
    • Where is the turbocharger in this cycle and what feeds it?
    • Why do two-stroke crosshead engines use a diaphragm and stuffing box?
    How did you do?
  2. 2
    CoreMEK Motor; DG Shipping guidelines on conducting MEO orals (basic-level example)

    Why does a large diesel engine need a turbocharger at all?

    Model answer points
    • To force more air into the cylinder than the piston can draw in, so more fuel can be burnt and the engine gives more power from the same size.
    • It uses exhaust gas energy that would otherwise be lost: the gas drives a turbine, which drives a compressor on the same shaft.
    • The compressed air is hot, so it passes through the scavenge air cooler; cooler air is denser and lowers thermal load on the engine.
    • On a two-stroke engine the turbocharger also provides the scavenging air; at low load auxiliary blowers start because the exhaust energy is too low.
    • Better specific fuel consumption and lower thermal stress are the two benefits examiners want to hear.
    The examiner may follow up with
    • When do the auxiliary blowers cut in and out?
    • What happens to the engine if the air cooler fouls on the air side?
    How did you do?
  3. 3
    CoreIACS UR M3

    When does the overspeed trip act on the main engine, and on a generator engine?

    Model answer points
    • The governor must stop the main engine exceeding rated speed by more than 15%.
    • Main engines of 220 kW and above that can be declutched or drive a CP propeller need a separate overspeed device that limits speed to 120% of rated.
    • Generator prime movers of 220 kW and above need a separate overspeed device limiting speed to 115% of rated.
    • The overspeed device is independent of the governor, so a governor fault cannot disable it.
    • Test it as per the PMS and the maker's procedure, and record the trip speed.
    The examiner may follow up with
    • Why does a direct-coupled fixed-pitch engine race in heavy weather?
    • How do you test the overspeed trip on a generator?
    How did you do?
  4. 4
    CoreSOLAS Ch. II-2 Reg. 4; MEK General syllabus

    Sketch and explain the heavy fuel oil system from the bunker tank to the main engine injector.

    Model answer points
    • Bunker (storage) tank with heating coils → transfer pump → settling tank, where water and sludge settle and are drained.
    • Settling tank → purifier heater → purifiers (and clarifier if fitted) → service tank.
    • Service tank → supply (low-pressure) pumps → mixing (venting) tank → circulating (booster) pumps → final heater controlled by a viscometer → fine filter → engine fuel pumps.
    • Surplus fuel returns to the mixing tank; the system is kept pressurised to stop gassing of hot fuel.
    • Point out the safety items: quick-closing valves on tank outlets operable from outside the space, jacketed high-pressure pipes with leak alarm, and save-alls.
    • Fuel must have a flash point of at least 60 °C (closed cup).
    The examiner may follow up with
    • Why is viscosity control better than temperature control?
    • Where would you change over to distillate fuel and why so slowly?
    How did you do?
  5. 5
    CorePumps and pumping systems, MEK General syllabus

    How does a centrifugal pump work, and why does it need priming?

    Model answer points
    • The impeller spins and throws liquid outward; the volute or diffuser converts velocity into pressure.
    • Liquid leaving the eye creates low pressure, so more liquid flows in from the suction.
    • A centrifugal pump cannot pull a vacuum on air: air has too little mass for the impeller to make useful suction. So the casing and suction must be full of liquid first.
    • Self-priming arrangements on board include a vacuum pump or air-ejector (common on bilge and ballast pumps) or a flooded suction.
    • Never run it dry: the mechanical seal overheats and fails in seconds.
    The examiner may follow up with
    • What is cavitation and how do you recognise it?
    • Why do you start a centrifugal pump with the discharge valve shut?
    How did you do?
  6. 6
    CoreMarine Electro-technology syllabus, Function 5

    Why is the ship's main power usually 440 V, 60 Hz, three-phase with an insulated neutral?

    Model answer points
    • Three-phase gives constant power to motors, needs less copper and lets motors start without special windings.
    • 440 V is a practical balance for low-voltage machines; large ships with big loads go to high voltage to keep current down.
    • Insulated neutral: a single earth fault does not trip the essential supply, so steering and lubricating pumps keep running. An earth-fault monitor alarms instead.
    • Lighting and small loads are fed at 220 V through transformers.
    • 60 Hz lets motors run faster for the same size; 50 Hz ships exist too.
    The examiner may follow up with
    • What is the danger of a second earth fault on another phase?
    • How does an earthed-neutral system behave differently?
    How did you do?
  7. 7
    CoreMarine Electro-technology, motor starting

    How does a star-delta starter work and why is it used?

    Model answer points
    • It starts an induction motor in star, so each winding gets phase voltage, about 1/√3 (58%) of line voltage.
    • That cuts starting current and starting torque to about one-third of direct-on-line values.
    • After a set time the timer switches the windings to delta for full voltage running.
    • Used where the supply cannot take the high DOL starting current, for example large pumps and compressors.
    • Downside: low starting torque, so it suits loads that start light; there is also a current surge at changeover.
    The examiner may follow up with
    • What is the starting current of a DOL induction motor, roughly?
    • How does a soft starter or VFD compare?
    How did you do?
  8. 8
    CoreMarine Electro-technology; Marine Engineering Practice (Function 6)

    How do you check the insulation resistance of a motor?

    Model answer points
    • Isolate the motor at the breaker, lock and tag it, and prove it dead.
    • Disconnect sensitive electronics; use an insulation tester (a 500 V instrument is usual for 440 V equipment).
    • Test each phase to earth and phase to phase; note the motor temperature.
    • Compare with the maker's limit and previous readings. A falling trend matters more than one value; low readings often mean moisture or dirt.
    • Discharge the winding after the test before touching it.
    • Record the results in the PMS.
    The examiner may follow up with
    • How would you dry out a motor with low insulation?
    • Why must the reading be corrected for temperature?
    How did you do?
  9. 9
    CoreMarine Engineering Practice; DG Shipping guidelines on conducting MEO orals (basic-level example)

    How do you measure the clearance of a bottom-end bearing on an auxiliary engine?

    Model answer points
    • Make the engine safe: stopped, start air isolated, turning gear engaged or blocked, lube oil pump stopped, permit issued.
    • Open the crankcase only after it has cooled; ventilate it.
    • Bring the crank to a convenient position and use feeler gauges at both sides, or remove the bearing cap and use lead wire or plastigauge.
    • Compare with the maker's manual clearance and wear limits; record in the PMS.
    • Check the bolts for stretch and tighten to the maker's hydraulic or torque procedure when reassembling.
    The examiner may follow up with
    • What happens if the clearance is too big?
    • Why are connecting rod bolts replaced after a set number of hours?
    How did you do?
  10. 10
    CoreMarine Engineering Practice, Function 6 (Circular 49 of 2026 syllabus)

    Which measuring instruments do you use in overhauls, and how do you read a micrometer?

    Model answer points
    • Outside and inside micrometers, vernier calipers, dial gauges, feeler gauges, telescopic gauges, and a crank deflection gauge.
    • Micrometer: read the sleeve (whole and half millimetres), then add the thimble reading (hundredths of a millimetre).
    • Check the zero on a standard before use; hold it square and use the ratchet so the pressure is even.
    • Liner wear is measured with an inside micrometer at set heights and in two directions, and compared with the maker's limits.
    • Keep instruments clean, in their boxes and calibrated.
    The examiner may follow up with
    • How do you check a shaft for run-out?
    • What is a vernier's least count?
    How did you do?
  11. 11
    CoreISM Code; company SMS; SOLAS Ch. II-2 (fire prevention)

    What is a hot work permit and when do you need one in the engine room?

    Model answer points
    • Any welding, burning, grinding or other spark-producing work outside the workshop needs a hot work permit under the SMS.
    • Before work: risk assessment, area cleaned of oil, tanks and pipes nearby checked gas-free, combustibles removed or covered.
    • Fire watch with a charged hose or extinguisher during the work and for a set time after.
    • Fire detectors in the area may be isolated only under the permit and restored afterwards.
    • Chief engineer and master approve; the bridge is informed.
    The examiner may follow up with
    • Why is hot work on a fuel pipe never done with the pipe in service?
    • How do you store oxygen and acetylene cylinders?
    How did you do?
  12. 12
    CoreShip Construction and Stability; MARPOL Annex I

    Why must the engine room tell the bridge before transferring fuel or ballast?

    Model answer points
    • Transfers change trim, list and stability. A large wing tank transfer can list the ship.
    • Slack tanks add free surface effect, which reduces the effective GM.
    • The chief officer controls stability; transfers that affect it must be agreed and recorded.
    • Fuel transfers also carry a pollution risk: check vents, sound tanks and watch levels so no tank overflows.
    • Enter the operation in the Oil Record Book Part I where required.
    The examiner may follow up with
    • What is GM and why does it matter?
    • How do you sound a tank and convert to volume?
    How did you do?
  13. 13
    CoreSOLAS Ch. II-2; DG Shipping guidelines on conducting MEO orals (example question)

    There is a small oil fire on an auxiliary engine cylinder head. What extinguisher do you use and how?

    Model answer points
    • Raise the alarm and inform the bridge; if safe, stop the engine and shut off the fuel.
    • Use a portable dry powder (DCP) or foam extinguisher; CO2 also works on a small machinery fire.
    • Approach from the windward or ventilation-upstream side, keep low, aim at the base of the fire and sweep.
    • Never use a water jet on burning oil.
    • Watch for re-ignition from hot surfaces; cool around it and keep the fire party ready.
    • Find the cause: a leaking fuel pipe or injector connection spraying on a hot exhaust part.
    The examiner may follow up with
    • Classify fires by type and name the media for each.
    • Why are high-pressure fuel pipes jacketed?
    How did you do?
  14. 14
    CoreSOLAS Ch. II-2 Reg. 10; FSS Code Ch. 5

    Walk me through releasing fixed CO2 into the engine room.

    Model answer points
    • It is a last resort decision by the master, after the fire cannot be fought locally.
    • Muster and account for everyone; no one may be left in the space.
    • Close ventilation, skylights, doors and fire dampers; stop fuel pumps, purifiers and fans from the remote stops; shut quick-closing valves.
    • Open the release cabinet: the pre-discharge alarm sounds; operate the two separate controls, one for the main valve and one to discharge the cylinders.
    • Keep the space closed and boundary cool; do not re-enter early, as reignition and lack of oxygen kill.
    • Re-entry only with breathing apparatus, under the master's plan, after the space has cooled.
    The examiner may follow up with
    • Why is CO2 not discharged until everyone is out?
    • How do you check the cylinder contents?
    How did you do?
  15. 15
    DeeperSOLAS Ch. II-1 Reg. 34 (air systems protected against internal explosion); Function 4 oral

    The starting air pipe to one unit is hot to touch while the engine is running. What is happening and what do you do?

    Model answer points
    • A hot branch pipe means that cylinder's air start valve is leaking: hot combustion gas blows back into the starting air line.
    • This is dangerous: lube oil carried over into the air line can ignite and cause a starting air line explosion.
    • Inform the chief engineer and the bridge, reduce load if needed, and keep the main starting valve shut once the engine is running.
    • At the first chance, stop, isolate and change or overhaul the valve; check the seat and spindle for sticking or carbon.
    • Check the protection: flame arresters or bursting discs on the branch pipes and the relief valve on the manifold.
    • Long-term cure: drain the receivers often and keep compressor discharge oil-free.
    The examiner may follow up with
    • Why must starting air pipes be separate from the compressor discharge line?
    • How much starting air capacity must a reversible engine have?
    How did you do?
  16. 16
    DeeperSOLAS Ch. II-1 Reg. 34 (compressed air systems)

    Explain how the starting air receivers and compressors are protected against overpressure and explosion.

    Model answer points
    • Relief valves on compressor stages and on the receivers, plus relief on compressor water jackets and coolers where a leak could overpressurise them.
    • A fusible plug on the receiver where required by class, to release pressure in a fire.
    • Keep oil entry to a minimum: correct compressor lube oil, regular drains from coolers, separators and receivers.
    • Compressor discharge pipes lead directly to the receivers; starting air pipes to the engine are separate from the compressor discharge system.
    • Flame arresters or bursting discs protect the branch to each cylinder.
    The examiner may follow up with
    • What is the low starting air pressure alarm for?
    • Why should you drain the receiver before starting the engine?
    How did you do?
  17. 17
    DeeperMARPOL Annex VI Reg. 12; DG Shipping guidelines on conducting MEO orals (operational-level example)

    What are the signs that a refrigeration plant is short of gas, and how do they differ from air in the system?

    Model answer points
    • Short of gas: low suction and low discharge pressure, bubbles in the sight glass, compressor runs long or continuously, room temperature rises, and the suction line may not frost normally.
    • Air (non-condensable gas) in the system: high discharge (condensing) pressure above the saturation pressure for the condenser temperature, high discharge temperature, the compressor may trip on high pressure.
    • To check for air: stop the plant, run the condenser cooling water, and compare the condenser pressure with the saturation pressure at the water temperature. A higher reading means air.
    • Air is purged from the top of the condenser; a gas shortage means finding and fixing the leak (soap solution or electronic detector) before charging.
    • Record refrigerant added; ozone-depleting substances need an ODS Record Book for rechargeable systems.
    The examiner may follow up with
    • Where do you charge refrigerant, liquid or vapour side?
    • Why must a refrigerant compressor not get liquid at the suction?
    How did you do?
  18. 18
    DeeperSOLAS Ch. II-1 Reg. 32 and Part E (boilers, unattended operation)

    The auxiliary boiler trips on flame failure. Walk me through relighting it.

    Model answer points
    • First find why: water in fuel, a blocked or worn burner tip, low fuel temperature or pressure, faulty photocell, or air damper fault.
    • Do not relight straight away into a hot furnace with fuel vapour: the control system runs a pre-purge with the fan to clear the furnace. Never bypass it.
    • Check the water level in the gauge glass is normal; never feed a boiler whose level has gone out of sight without the chief engineer's decision.
    • Clean or change the burner, check the flame eye, reset the lockout and start in automatic sequence; watch the flame.
    • Unattended oil-fired boilers must shut off fuel and alarm on low water level, air supply failure or flame failure.
    The examiner may follow up with
    • What is a furnace blowback and how does purge prevent it?
    • How many water level indicators must the boiler have?
    How did you do?
  19. 19
    DeeperFresh water generator, MEK General syllabus

    You are on watch and the fresh water generator salinometer alarms. What do you do?

    Model answer points
    • The high-salinity alarm normally dumps the product water back to the bilge or the shell automatically; confirm the dump valve has operated.
    • Stop production to the tanks and test the water manually if a test kit is on board.
    • Find the cause: priming or carry-over from a high brine level or too much feed, a leaking condenser tube, or low vacuum disturbing the boiling.
    • Check the brine ejector, feed rate and jacket water temperature; correct and restart.
    • If contaminated water reached a tank, inform the chief engineer; it may need to be emptied and treated.
    • Remember the fresh water generator must not run near the coast or in polluted water when making drinking water, per the company SMS.
    The examiner may follow up with
    • Why does an FWG work under vacuum?
    • How does a reverse osmosis plant differ?
    How did you do?
  20. 20
    DeeperSOLAS Ch. II-1 Part E (Regs 46-54)

    Before you leave the engine room unattended (UMS) at night, what do you check?

    Model answer points
    • Follow the UMS checklist in the SMS and get the chief engineer's agreement.
    • Alarm system tested and working; alarms extend to the engineers' cabins and the bridge. The duty engineer's selector is set to you.
    • Bilge wells dry and bilge high-level alarms tested; tanks with enough margin; settling and service tanks full.
    • Standby generator in auto and set to start automatically on failure; standby pumps in auto.
    • No loose oil, rags or hot work; fire detection active; purifiers and boilers stable.
    • Main engine running steady, all temperatures and pressures normal; inform the bridge when you leave and when you return.
    The examiner may follow up with
    • What happens if the bridge does not acknowledge an engine-room alarm?
    • Which alarms must a UMS main engine have?
    How did you do?
  21. 21
    DeeperSOLAS Ch. II-1 Regs 43 and 44

    What services does the emergency switchboard supply on a cargo ship, and how fast must they come on?

    Model answer points
    • On cargo ships the emergency source must supply emergency lighting and other listed services for 18 hours.
    • The emergency generator must start automatically and supply services within 45 seconds of main power failure.
    • Where a transitional battery source is needed, it supplies its services for at least half an hour.
    • Typical loads: emergency lighting, navigation lights, GMDSS and radio, fire detection and alarm, the emergency fire pump, a steering gear unit where required, general alarm and internal communications.
    • Emergency sets must start readily at 0 °C and have stored energy for three consecutive starts plus a second source for three more within 30 minutes, unless manual starting is shown to be effective.
    The examiner may follow up with
    • Where must the emergency generator be located?
    • How is the emergency switchboard normally fed in port?
    How did you do?
  22. 22
    DeeperSOLAS Ch. II-1 Regs 29 and 30

    Why is a steering gear motor fitted with an overload alarm but no overload trip?

    Model answer points
    • Steering is too important to lose because a motor is running warm. SOLAS requires steering gear circuits to have short-circuit protection and an overload alarm, not an overload trip.
    • A trip during manoeuvring could put the ship out of control; the alarm lets the engineer start the second unit or reduce load first.
    • Indications of running, power failure and overload are given on the bridge and in the engine control position.
    • Short-circuit protection still clears a real fault to protect the switchboard.
    • Link to the steering gear rules: the main gear moves the rudder from 35° one side to 35° the other, and from 35° on either side to 30° on the other side in not more than 28 seconds.
    The examiner may follow up with
    • What alarms does a hydraulic steering gear need?
    • How is the alternative power supply arranged on a large ship?
    How did you do?
  23. 23
    DeeperIACS UR M35 and UR M29-M31; SOLAS Ch. II-1 Part E

    Explain the difference between an alarm, a slowdown and a shutdown on the main engine. Give examples.

    Model answer points
    • An alarm only warns: for example high exhaust temperature deviation or scavenge air box high temperature.
    • A slowdown reduces engine speed to protect it while it can still run: for example high oil mist (on low-speed engines), high scavenge temperature (fire) or high thrust bearing temperature as set by the maker.
    • A shutdown stops the engine because running on would cause serious damage: overspeed and low lube oil pressure are classic.
    • The safety system acts least drastic first and is fail-safe; a shutdown needs a manual reset.
    • The alarm system must be independent of the control and safety systems.
    The examiner may follow up with
    • Which slowdowns can the bridge override, and when?
    • What does 'fail-safe' mean for a pressure switch?
    How did you do?
  24. 24
    DeeperMarine Engineering Practice; pumps and pumping systems

    You are overhauling a centrifugal sea water pump. What do you check before you box it up?

    Model answer points
    • Impeller: erosion, cavitation pitting, cracks; wear ring clearance against the maker's figures.
    • Shaft: run-out with a dial gauge, wear under the seal, key and keyway.
    • Mechanical seal: faces flat and undamaged, spring and O-rings renewed.
    • Bearings: noise, play, renew if doubtful; correct grease.
    • Casing: erosion, zinc anodes if fitted; coupling alignment after refit.
    • Test run: check pressure, current, noise and seal leakage; record in the PMS.
    The examiner may follow up with
    • Why does a worn wear ring cut the pump's output?
    • How do you align a flexible coupling?
    How did you do?
  25. 25
    DeeperMarine Engineering Practice; DG Shipping guidelines on conducting MEO orals (operational-level example)

    Why are main engine tie-rods tightened in a particular sequence?

    Model answer points
    • Tie-rods hold the bedplate, A-frames and entablature in compression, so the cast parts carry no tensile combustion load.
    • Tightening them out of sequence can distort the frame and bedplate and upset crankshaft alignment.
    • The maker gives a sequence and hydraulic pressure, usually working from the middle outward and in pairs.
    • After a loss of tension (for example after a heavy grounding or a long time) they are checked and re-tightened.
    • Loose tie-rods can lead to cracked frames and fretting.
    The examiner may follow up with
    • How do you check tie-rod tension?
    • What is chocking and why does it matter?
    How did you do?
  26. 26
    DeeperMarine Engineering Practice; fuel injection

    Walk me through overhauling and testing a fuel injector.

    Model answer points
    • Remove with care; plug fuel connections to keep dirt out.
    • Dismantle on a clean bench; clean the nozzle holes with the correct needles; inspect the needle and seat for wear and the nozzle for cracks.
    • Lap the seat if the maker allows; renew the nozzle if it is worn.
    • Test on the injector test rig: set the opening pressure to the maker's figure, check spray pattern, and hold pressure below opening to prove no dribble.
    • Wear eye protection and keep hands away from the spray: high-pressure fuel can penetrate skin.
    • Record the opening pressure and running hours.
    The examiner may follow up with
    • What does a dribbling injector do to the engine?
    • What injection pressures are typical for your engine?
    How did you do?
  27. 27
    DeeperMarine Engineering Practice; heat exchangers

    A jacket water cooler is leaking. How do you find the leaking tube and repair it?

    Model answer points
    • Signs: jacket water expansion tank level changes, rising chlorides in the jacket water test, or sea water in the system.
    • Isolate and drain the cooler; on a tube cooler, remove the end covers.
    • Pressure test the sea water side, or fill the shell side and watch the tube ends; dye or air tests also work.
    • Plug the leaking tube at both ends with tapered plugs; record the number of plugged tubes against the maker's limit.
    • For a plate cooler, open the pack, find the cracked plate by dye penetrant or a pressure test, and replace it and its gasket.
    • Restore treatment of the jacket water after any sea water contamination.
    The examiner may follow up with
    • Why is the jacket water side kept at higher pressure than sea water on some systems?
    • What is the effect of too many plugged tubes?
    How did you do?
  28. 28
    DeeperMARPOL Annex I Reg. 17 and Appendix III

    What do you write in the Oil Record Book Part I?

    Model answer points
    • Machinery space operations: ballasting or cleaning of fuel tanks, discharge of dirty ballast, collection and disposal of oil residues (sludge), discharge or disposal of bilge water, bunkering, and failure of oil filtering equipment.
    • Each operation uses the code letters and item numbers in the book; entries are made without delay.
    • Each entry is signed by the officer in charge; each completed page is signed by the master.
    • The book is kept for three years after the last entry.
    • Errors are struck through with a single line and signed, never erased or torn out.
    The examiner may follow up with
    • What is the limit for discharging machinery space bilge outside special areas?
    • Who can inspect the Oil Record Book?
    How did you do?
  29. 29
    DeeperMARPOL Annex IV Reg. 11

    When can a ship discharge sewage at sea?

    Model answer points
    • Annex IV applies to ships of 400 GT and above, or certified to carry more than 15 persons, on international voyages.
    • Comminuted and disinfected sewage through an approved system: more than 3 nm from the nearest land.
    • Untreated sewage from a holding tank: more than 12 nm from the nearest land, at a moderate rate, with the ship en route at not less than 4 knots.
    • Effluent from an approved sewage treatment plant can be discharged closer, provided it shows no visible floating solids or discolouration.
    • The Baltic Sea is an Annex IV special area with stricter rules for passenger ships.
    The examiner may follow up with
    • How does a biological treatment plant work?
    • What certificate covers sewage?
    How did you do?
  30. 30
    DeeperBWM Convention Reg. D-2 and Reg. B-2

    What does the ballast water D-2 standard require, and what does the engineer do with the BWMS?

    Model answer points
    • D-2 limits viable organisms: fewer than 10 per m³ of 50 µm or more, fewer than 10 per ml between 10 and 50 µm, plus limits on indicator microbes.
    • The ship meets it with a type-approved ballast water management system, for example filtration plus UV or electro-chlorination.
    • The engineer runs it during ballasting and deballasting, monitors alarms and bypass, cleans filters and UV lamps and records operations.
    • Every operation goes in the Ballast Water Record Book according to the Ballast Water Management Plan.
    • If the system fails, follow the plan's contingency measures and inform the port state; do not just bypass it.
    The examiner may follow up with
    • What is the D-1 exchange standard?
    • Why are UV systems sensitive to turbid water?
    How did you do?
  31. 31
    DeeperSOLAS Ch. II-1 Reg. 35-1 (bilge pumping); SSEP emergency procedures

    Water is rising fast in the engine room bilge on your watch. What are your actions?

    Model answer points
    • Raise the alarm, call the chief engineer and inform the bridge.
    • Start the bilge pumps and, if needed, other pumps with bilge suctions; watch the level.
    • Find the source: a burst sea water pipe, a cooler, a sea chest or valve, a stern tube gland or a hull crack. Isolate it if you can.
    • In a serious flood, the emergency bilge suction (direct suction from the largest sea water pump) is used on the chief engineer's order.
    • Protect switchboards and electrical machinery; prepare to stop machinery that would be flooded.
    • Record times and actions; follow the flooding contingency plan.
    The examiner may follow up with
    • What must bilge pumping be able to do with the ship listed?
    • How do you check a bilge high-level alarm?
    How did you do?
  32. 32
    DeeperSOLAS Ch. II-1 Reg. 29; SOLAS Ch. V Reg. 26

    What would you check in the steering gear room during your rounds?

    Model answer points
    • Hydraulic oil levels in the reservoirs and the storage tank; low-level alarms working.
    • Leaks at pumps, rams, pipes and the rudder carrier; unusual noise or vibration.
    • Both pump units' motors: temperature, running indication, changeover.
    • Emergency steering instructions and change-over diagram posted; communication to the bridge working; rudder angle indicator.
    • Greasing points and the rudder carrier bearing; the compartment clean and lit.
    The examiner may follow up with
    • How often are emergency steering drills held?
    • What is the storage tank for?
    How did you do?
  33. 33
    TrapSOLAS Ch. II-2 Reg. 4.2.1

    The bunker barge offers a fuel with a flash point of 52 °C at a good price. Can you burn it in the main engine?

    Model answer points
    • No. Fuel for boilers and machinery must have a flash point of not less than 60 °C (closed cup).
    • The only exception is fuel of not less than 43 °C for emergency generators, under conditions in the regulation.
    • A low flash point fuel in heated tanks gives flammable vapour in the tank and the engine room.
    • Check the bunker delivery note and the supplier's declaration; refuse or report non-compliant fuel to the chief engineer.
    • The examiner is testing whether you know the number and that safety beats price.
    The examiner may follow up with
    • What other fuel properties do you check on the delivery note?
    • Why do heated fuel tanks have a high temperature alarm?
    How did you do?
  34. 34
    TrapISM Code section 10 (maintenance); SMS alarm management

    A level sensor keeps giving a false alarm and annoys the bridge. Can you inhibit it for the rest of the voyage?

    Model answer points
    • No, not on your own. Inhibiting an alarm removes a safety barrier.
    • Inform the chief engineer; any inhibit or override must follow the SMS procedure, be logged, and be covered by an alternative such as extra rounds or soundings.
    • Find and fix the cause: dirty float, wiring, wrong set point or a failing transmitter.
    • Put a tag on the panel and remove the inhibit as soon as the sensor is repaired.
    • Examiners use this to test your safety judgement; the 'convenient' answer fails.
    The examiner may follow up with
    • What other barriers does a UMS engine room rely on?
    • How would you test a level switch at sea?
    How did you do?
  35. 35
    TrapMarine Engineering Practice; class rules on repairs

    You find a crack in a cast iron cylinder head. Can you weld it on board and put it back in service?

    Model answer points
    • Not as a normal fix. Cast iron is brittle and hard to weld; a field weld can crack again and fail under firing pressure.
    • The safe answer is to replace it with a spare and send the cracked one for assessment.
    • Any repair to a pressure-bearing engine part needs the maker's approval and class acceptance.
    • If no spare exists, inform the chief engineer and superintendent; the unit may have to be cut out under the maker's procedure.
    • Find out why it cracked: cooling water failure, thermal shock or overload.
    The examiner may follow up with
    • How would you cut out a unit on a two-stroke engine?
    • What is metal stitching?
    How did you do?
  36. 36
    TrapMARPOL Annex I Regs 14 and 15; ISM Code

    The oily water separator is out of order and the bilge well is nearly full. The chief says 'just use the emergency bilge suction'. Do you?

    Model answer points
    • No. The emergency bilge suction is for saving the ship from flooding, not for disposing of oily bilge water.
    • Pumping oily bilge overboard without the OWS and 15 ppm alarm breaches MARPOL Annex I and can lead to detention, fines and criminal charges.
    • Options: transfer bilge to the bilge holding tank, reduce leaks, and land it to a reception facility at the next port.
    • Record the OWS failure in the Oil Record Book and report it through the SMS.
    • Speak up politely but firmly; if pressured, use the company's open reporting line.
    The examiner may follow up with
    • What records would show an illegal discharge?
    • What is a 'magic pipe' and why do inspectors look for one?
    How did you do?
  37. 37
    TrapSTCW Reg. VIII/1 and Code Section A-VIII/1; MLC 2006 Standard A2.3

    After a long night repairing a purifier, the chief engineer asks you to keep the morning watch too. Your rest record would show only 5 hours rest in 24. What do you do?

    Model answer points
    • Explain the limit: at least 10 hours of rest in any 24 hours and 77 hours in any 7 days, in no more than two periods, one of at least 6 hours.
    • Working on would make you unfit for watchkeeping and is a safety risk.
    • Ask the chief to rearrange watches; an exception is possible only for an emergency or drill, with compensatory rest afterwards.
    • Record the hours truthfully; never alter rest records.
    • This tests honesty as much as knowledge.
    The examiner may follow up with
    • What is the maximum interval between rest periods?
    • How are hours of rest recorded and checked?
    How did you do?

Reading answers is not the same as saying them. Our AI voice examiner asks these out loud, listens to your answer, asks the follow-up and marks you against the rule. Join early access or try the free timed mock oral drill.

Frequently asked questions

How many orals are there in MEO Class 4?

There is one oral for each of the four Part B functions: marine engineering, electrical and control, maintenance and repair, and controlling the operation of the ship. You can also opt for one combined oral covering all four, with any failure recorded against the function concerned.

Can I take one MEO Class 4 function oral at a time?

Yes. DGMA's engineering FAQ says an approved candidate can appear for any number of Part B functions, even at the first attempt. Many candidates take Function 3 or Function 6 first and keep the hardest for later.

What is the pass mark for the MEO Class 4 oral?

At least 60% in each oral. Written papers need at least 50% each. Results need the approval of the Chief Examiner of Engineers.

Is the MEO Class 4 oral online?

No. Engine orals are face-to-face at the MMD with a panel of two examiners, one candidate at a time. Nautical (deck) orals are mostly online, which confuses many candidates.

How long is an MEO Class 4 function oral?

No official length is published. It depends on the function and on how you answer. A combined oral covering all four functions is naturally longer than a single-function oral.

Which function oral is the hardest?

Most candidates find Function 4 (marine engineering) the widest, because it covers the main engine, auxiliaries, boilers, purifiers, refrigeration and watchkeeping. Function 5 trips up candidates who never worked on electrical gear.

Do I keep a function pass if I fail another function?

Yes. A subject passed at any MEO grade does not need to be taken again, and a failed subject can be retaken at a later exam. Check the five-year validity rules on the parent exam page.

Will the examiner ask about my last ship?

Usually yes. The guidelines encourage examiners to refer to your TAR book and competences, and many open with your last ship's engine and your duties. Know its main engine model, generator ratings and boiler type.

Should I draw sketches in the oral?

Yes, whenever the question is about a system or a component. A quick, labelled sketch shows understanding and keeps your answer in order. Practise drawing the main systems from memory.

Are these the real MEO Class 4 oral questions?

No. We write our own questions around the published syllabus and the regulations. They show the style and depth you should expect, not questions from any real oral.

Is the preparatory course needed for the oral in 2027?

From 1 January 2027, a one-month MEO Class IV preparatory course is mandatory for first-time candidates and for those who did not appear for any function in 2026. It covers both the written and oral exams.

What happens if I fail a safety question?

The guidelines tell examiners to ask another safety question rather than move on. Safety answers matter a lot, so make sure your fire, flooding, enclosed space and pollution answers are solid.

Who takes the MEO Class 4 orals, and how many examiners are there?

MEO orals are held one candidate at a time before one external and one internal examiner, or two internal examiners[5]. Examiners question you at basic, operational and responsible levels in a ratio of about 1:6:3 and decide the result together[6].

Sources 24 documents

Each number in the text links to the source below. Labels show the type of source; see our editorial policy.

  1. Official TEAP Manual Part A (Consolidated Rev. 1, 1 May 2015), Chapter III, Tables III/0-1 and III/0-2 · 1 May 2015
  2. Official TEAP Manual Part A (Consolidated Rev. 1, 1 May 2015), Chapter III, Section III/16 para 8.7 · 1 May 2015
  3. Official DG Shipping Engineering Wing FAQs: E-Governance and E-Pariksha (2024) · 1 January 2024
  4. Official TEAP Manual Part A (Consolidated Rev. 1, 1 May 2015), Chapter III, Section III/16 para 10 · 1 May 2015
  5. Official DGS Instructions to Examiners Circular No. 071 (3 Aug 2004) · 3 August 2004
  6. Official DGS Instructions to Examiners: Guidelines on conducting Orals (MEO 1998 Rules), 1 March 2000 · 1 March 2000
  7. Official DGMA EAC Branch Circular No. 49 of 2026 · 15 August 2026
  8. Official TEAP Manual Part A (Consolidated Rev. 1, 1 May 2015), Chapter III, Section III/1 para 6.5 · 1 May 2015
  9. Official DG Shipping Engineering Wing, FAQ on e-Governance and e-Pariksha
  10. Official DG Shipping, Instructions to Examiners: Guidelines on conducting Orals (MEO 1998 Rules), Issue 00, 1 March 2000 · 1 March 2000
  11. Official STCW/CONF.2/34 Attachment 2: 2010 Manila amendments to the STCW Code, Part A Introduction · 25 June 2010
  12. Official DGMA EAC Branch Circular No. 49 of 2026, Annexure I · 15 August 2026
  13. Official DGMA EAC Branch Circular No. 49 of 2026 on preparatory courses for MEO and ETO CoC examinations, 15 Aug 2026 · 15 August 2026
  14. Official DGS Instructions to Examiners Circular No. 67 (14 July 2004) · 14 July 2004
  15. Official DGMA EAC Branch Circular No. 49 of 2026, Part A · 15 August 2026
  16. Official TEAP Manual Part A (Consolidated Rev. 1, 1 May 2015), Chapter III, Section III/16 paras 8.2 and 9 · 1 May 2015
  17. Official DGMA Notice to Engineering candidates for CoC Written examination, November 2026 · 26 October 2026
  18. Official DGMA Notice to candidates appearing for MEO Class II and Class IV written examinations (2 Nov 2026) · 2 November 2026
  19. Official Merchant Shipping (STCW for Seafarers) Rules, 2014, G.S.R. 546(E), Schedule (Fees, see Rule 78), Gazette pp. 129-132 · 30 July 2014
  20. Official Merchant Shipping (Standards of Training, Certification and Watch-keeping for Seafarers) Rules, 2014, G.S.R. 546(E), Gazette of India, 30 July 2014 · 30 July 2014
  21. Official DGMA notice: Commencement of MEO Class IV examinations at MMD Kandla (19.10.2026) · 19 October 2026
  22. Official Exam Notice for Engineering Grade CoC candidates appearing in June 2026 (29.05.2026) · 29 May 2026
  23. Official DGMA EAC Branch Circular No. 50 of 2026 · 21 August 2026
  24. Official DGMA EAC Branch Circular No. 65 of 2026 · 29 September 2026

Where should you go next?

  • Oral topics14 pages: examiner questions with model answer points, deck and engine
  • Question banks7 pages: free MCQ sets with answers and explanations
  • Free tools4 pages: mock oral drill, lights trainer, sea-time calculator, practice tests
Exam Prep DeskMaritime exam researchers

We write from the conventions (STCW, COLREG, SOLAS, MARPOL), the authorities' own notices and published syllabi, and cite the source for every fee, rule and date. We are independent and not linked to any maritime administration or test provider. Found an error? It matters at sea: tell us and see how we correct · Disclaimer.

Related guides

AI voice mock oral

Say it out loud before the examiner asks.

Our examiner asks CoC oral questions by rank and function, listens to your answer, asks the follow-up and scores you against the rule. Early access is open for India first.

  • Deck and engine, every rank
  • Answers referenced to the conventions
  • Independent, not linked to any authority
WhatsApp us