NautemyCoC orals · exams · job testsEarly access
Exam guide22 min readJump to 12 questions

MEO Class 4 oral exam in India: eligibility, sea time, the four function orals and how to book

The MEO Class 4 exam is the final test for India's officer in charge of an engineering watch CoC. You face an oral in each of four STCW functions, need 60% in each, and book on exams.dgma.gov.in after 6 months of TAR-recorded sea time.

On this page
  1. Key facts
  2. What is the MEO Class 4 oral exam?
  3. Who is eligible for the MEO Class 4 exam?
  4. How is the MEO Class 4 exam structured?
  5. What is asked in the MEO Class 4 oral, function by function?
  6. How is the MEO Class 4 oral conducted?
  7. What happens on MEO Class 4 oral day?
  8. How do you book the MEO Class 4 exam on exams.dgma.gov.in?
  9. Which documents do you need for the MEO Class 4 assessment?
  10. How should you prepare for the MEO Class 4 oral? A 10-week plan
  11. What do examiners probe hardest at MEO Class 4?
  12. Why do candidates fail the MEO Class 4 oral?
  13. What happens after the MEO Class 4 oral: results, re-attempts and validity?
  14. What does MEO Class 4 cost, and what if you fail a function?
  15. What changed for MEO Class 4 in 2025 and 2026?
  16. Where can you practise for the MEO Class 4 oral?
  17. 12 practice questions
  18. Frequently asked questions
  19. Sources

Key facts

Authority
DG Shipping, now the Directorate General of Maritime Administration (DGMA), through the MMDs[1]
Certificate
MEO Class IV, STCW Reg. III/1, ships of 750 kW or more[2]
Sea time
6 months approved service in the TAR book (4 months propelling, motor)[3]
Written papers
Part A: 4 papers (often exempt). Part B: 7 papers in 4 functions[4]
Orals
One per function, or one combined oral for all four[5]
Pass mark
50% each written paper, 60% each oral[6]
Booking
exams.dgma.gov.in, fees via Bharatkosh[7]
Centres
7 MMDs incl. Kandla from Nov 2026[8]
New from 1 Jan 2027
One-month preparatory course mandatory for first-timers[9]

Checked 14 November 2026. Fees and rules change: confirm with the authority before you book.

What is the MEO Class 4 oral exam?

The MEO Class 4 oral is the spoken assessment you must pass, function by function, to get India's Marine Engineer Officer Class IV Certificate of Competency, the licence to keep an engine-room watch as officer in charge on ships of 750 kW or more[2].

It sits at the end of Part B. Part B has written papers and an oral in four functions: Marine Engineering, Maintenance and Repair, Electrical, Electronic and Control Engineering, and Controlling the Operation of the Ship[4]. You need at least 50% in each written paper and at least 60% in each oral[6]. A pass in one subject stays with you; you only resit what you failed[10].

The exam is run by the engineering wing of the Directorate General of Shipping, which now publishes under the name Directorate General of Maritime Administration (DGMA)[1], through the Mercantile Marine Department (MMD) centres. Everything from eligibility assessment to seat booking now runs on the new portal exams.dgma.gov.in[7].

This page covers the whole route: who is eligible, what each paper and oral covers, how the oral is run, how to book, a 10-week plan, what examiners probe, why people fail, and what changes on 1 January 2027. If you are already past Class 4, read the MEO Class 2 oral exam guide or compare the two in MEO Class 4 vs Class 2.

Who is eligible for the MEO Class 4 exam?

You are eligible once you have finished an approved pre-sea route and at least 6 months of approved sea service recorded in an approved Training and Assessment Record (TAR) book[11]. The sea service is checked by the examiner at your MMD before you can book.

The propelling-time rule matters as much as the total. For a motor certificate you need 6 months in total, of which at least 4 months is watchkeeping on main propulsion machinery or UMS duties. A combined motor and steam certificate needs 8 months total with 6 months propelling[3]. Service on UMS ships counts in full[12]. If your ships had no steam boilers you must also complete an approved Boilers and Steam Engineering course[13].

Your sea service must be backed by testimonials signed by the Chief Engineer and endorsed by the Master or the owner's representative[14]. Service through agencies without a valid RPS licence is not recognised[15]. At least six months of qualifying service must fall within the five years before you apply[16]. Use the sea time calculator to check your dates and read CoC sea time requirements in India for the counting rules (NCV, harbour and offshore service).

MEO Class 4 entry routes and sea service
Entry routePart ASea service before Part BNotes
4-year marine engineering degree (MERI-type, approved)Exempt[17]6 months in TAR book, 4 months propelling (motor)Most common route for B.Tech/B.E. Marine cadets
Mechanical / naval architecture degree + approved GME courseExempt[17]6 months in TAR book; apply for assessment after it[18]EXN-45 no longer needed to start onboard training
Diploma or other approved streamsSit Part A (Heat Engines, Applied Mechanics, Mathematics, Engineering Drawing)As per your stream's flow diagramCheck your stream with the MMD before sailing
Indian ETO CoC holder (new 2026 pathway)Sit Part A (maths exempt for qualifying B.E./B.Tech)9 months onboard training after a 3-month bridging course (6 months if 36 months as ETO)Function 5 exempt[19]
MEO Class I or II holder adding steam or motorNot neededNone if you complete the approved plant simulator courseOral only[20]

How is the MEO Class 4 exam structured?

The exam has two parts. Part A is four written papers on engineering science; graduates of approved degree and GME routes are exempt[17]. Part B is the real CoC exam: seven written papers grouped into four STCW functions, and an oral for each function[4].

The timings below are from the November 2026 timetable published by the DGMA engineering wing[7]. Written papers are held at the MMD centres every month; orals are booked in the same window on the portal.

You may take the orals function by function, in any order and in any number at your first attempt[15], or opt for one combined oral that covers all four functions[5]. Fees are charged per function, so paying for MEK General also covers MEK Motor, and Ship Construction and Stability covers SSEP[15]. The STCW functions at operational level come from STCW Code Table A-III/1.

MEO Class 4 written papers and orals
PartSTCW functionWritten paper(s)Time (Nov 2026)Oral
AMarine engineering (science base)Heat Engines; Applied Mechanics; Mathematics; Engineering Drawing2 h; 2 h; 2 h; 4 hNo
BFunction 4: Marine engineering at operational levelMEK General; MEK Motor (or Steam)3 h eachYes
BFunction 5: Electrical, electronic and control engineeringMarine Electro Technology3 hYes
BFunction 6: Maintenance and repairMarine Engineering Practice3 hYes
BFunction 3: Controlling the operation of the ship and care for persons on boardShip Construction and Stability; Ship Safety and Environmental Protection (SSEP)3 h; 2 hYes

What is asked in the MEO Class 4 oral, function by function?

Each oral tests whether you can run and protect the machinery you watched as a junior engineer. The new preparatory course syllabus lists the same subjects by function[21]. Use the table to plan; each topic page has 30 to 40 examiner-style questions with model answers.

MEO Class 4 oral syllabus by function
FunctionCore oral topicsStudy pagesMCQ practice
4: Marine engineeringTwo-stroke main engine, starting and reversing, scavenge fires, crankcase explosions, generators, purifiers, boilers, fresh water generator, compressors, refrigeration, watchkeeping, UMSTwo-stroke main engine, auxiliary diesel engines, marine boilers, fuel oil purifiers, air compressors and starting air, fresh water generator, refrigeration and AC, engine room watchkeeping, UMS and automationMain engine MCQ, boilers MCQ, refrigeration MCQ
5: Electrical, electronic and controlGenerators and paralleling, preferential trips, earth faults, motor starters, emergency power, batteries, alarms and sensorsMarine electrical systems, UMS and automationMarine electrical MCQ
6: Maintenance and repairOverhauls, clearances, measuring tools, pumps, valves, heat exchangers, safe isolation, permits, hot workPumps and pumping systems, steering gear, fuel oil purifiersPumps and purifiers MCQ
3: Controlling operation and care for personsMARPOL Annex I and VI, oily water separator, sulphur limits, fire-fighting, LSA, enclosed space entry, stability basics, ISMOily water separator, fuel sulphur rules and scrubbers, MARPOL, fire-fighting, enclosed space entry, ship stabilityMARPOL MCQ, fire-fighting and LSA MCQ

How is the MEO Class 4 oral conducted?

The oral is a face-to-face interview at your MMD, one candidate at a time, in front of one external and one internal examiner or two internal examiners[22]. It is not an online exam; you attend in person at the centre where you booked (see can you take the MMD oral online).

DG Shipping's published guidance to examiners explains the style. Questions are pitched at three levels: basic (what is it), operational (how do you do it) and responsible (why, and when). The suggested mix is roughly 1:6:3, so most questions are about how you actually operate and maintain machinery[23]. The same guidance tells examiners to keep the oral independent of your written papers, to decide the result jointly, and to record a failure by function, so you only resit that function. If you miss a safety question, expect another safety question rather than a move to a new topic.

Examiners often start with your last ship: engine type, your watch duties, a breakdown you saw. From there they push into how and why. They may hand you a sketch pad. Many ask you to draw a system (fuel oil, starting air, cooling water, a purifier bowl) and talk through it. The oral result is often told to you at the centre, but it is final only after the Chief Examiner approves it[24].

No oral length is published by the administration. Plan for a long sitting if you take the combined oral, and take a practice oral with our mock drill first so the format is not new.

What happens on MEO Class 4 oral day?

MEO Class 4 orals are face-to-face at the MMD, one candidate at a time[22].

MEO Class 4 oral day: timeline (rules cited; the rest is our advice)
WhenWhat happensWhat to have or do
Week beforeRe-read your TAR book, testimonials and last ship's particularsExaminers are encouraged to refer to your TAR book and not to base the oral on your written papers[25]
MorningReport to the MMD; one candidate is examined at a timeOne external and one internal examiner, or two internal[22]
OpeningYour last ship and your watchKnow power, engine type, generators, boilers, automation
CoreBasic, operational and some responsible-level questions in a suggested 1:6:3 ratio[23]Answer: safe action, reason, check, report
Safety question you cannot answerAn alternate safety question of equal importance should follow[25]Say so plainly; do not bluff
EndThe examiner may tell you the result[24]Final only after the Chief Examiner of Engineers approves[6]
2-3 working days laterOral result on the portal[26]Check before booking anything else

How do you book the MEO Class 4 exam on exams.dgma.gov.in?

Booking moved to the new DGMA examination portal in 2026; the old e-Pariksha registration was frozen from April 2026 and the June 2026 exams were the first booked only on the new portal[27]. The old dgshipping.gov.in site was discontinued from 31 March 2026, so use dgma.gov.in for notices[28]. Follow these steps; our MMD exam booking guide has screenshots of the general flow.

  1. 1
    Register on the portal

    Create your profile on exams.dgma.gov.in with your INDoS number, CDC and email. Use the same details as your DGMA seafarer profile.

  2. 2
    Apply for eligibility assessment

    Upload your TAR book, sea service testimonials, company letter, every stamped CDC page, course certificates and academic records. Missing testimonials and company letters are the most common reasons an application is put on hold[15].

  3. 3
    Answer any query quickly

    The dealing assistant and assessing officer may query back through the portal. If you do not start your exams within one year of assessment you must be reassessed and pay again[15].

  4. 4
    Watch for the monthly booking window

    Each month the engineering wing publishes a notice with the window. In November 2026 MEO Class IV booking ran 2 to 9 November[7].

  5. 5
    Book at your parent MMD first

    For the first six days you can book only at the MMD holding your file. Only if your MMD has zero seats for a written subject can you book another MMD in the last two days, and all papers that month must be at one centre[29].

  6. 6
    Pay once through Bharatkosh

    Pay by UPI, net banking or card. Do not pay twice; retry only after the portal shows a failed-transaction receipt[7].

  7. 7
    Confirm and attend

    Your admit card confirms written seats. Reach the centre 45 minutes early and leave phones, bags and smartwatches outside[7]. A booked seat cannot be moved to another month online, and a no-show is recorded as 'Failed (Absent)'[15].

Which documents do you need for the MEO Class 4 assessment?

Bring originals of everything you uploaded. The full list, with notes on attestation and common rejections, is in our MMD exam documents checklist, and the oral exam day checklist covers what to carry on the day.

How should you prepare for the MEO Class 4 oral? A 10-week plan

Most candidates need 8 to 12 weeks of focused work after signing off. The plan below assumes about 6 hours a day and that you sit the written papers before or alongside the orals. Adjust the order to the functions you booked first. For a shorter final push, use the 30-day oral preparation plan, and see books for MEO Class 4 for reading.

10-week MEO Class 4 preparation plan
WeekFocusWhat to produce
1Your own ship: write up the main engine, generators, boiler, purifiers, steering gear and every system you watchedOne-page sketch of fuel, lube, cooling, starting air systems from memory
2Function 4 core: two-stroke engine construction, starting, reversing, scavenge fire, crankcase explosionAnswers to the main engine questions, out loud
3Function 4 auxiliaries: generators, purifiers, compressors, FWG, refrigerationFault-finding tables for each machine
4Boilers and steam: mountings, water tests, blowdown, low-water emergency, gauge glassBoiler water-test log with limits from your ship's manual
5Function 5: generator paralleling, protection, earth faults, emergency generator and batteries, motor startersSingle-line diagram of your ship's switchboard
6Function 6: overhaul procedures, clearances, measuring tools, isolation and permitsStep lists for a pump, a valve and a cylinder head overhaul
7Function 3: MARPOL Annex I and VI, ORB entries, OWS, sulphur rules, BWM basicsFive sample Oil Record Book entries
8Function 3: fire-fighting, LSA, enclosed space entry, ISM, stability basicsEmergency action lists: engine-room fire, flooding, blackout
9Mock orals: two per week, one function each, with a friend or the mock oral drillList of every question you could not answer
10Close gaps, re-read the list, rest before the oralTake the oral readiness check

What do examiners probe hardest at MEO Class 4?

Examiners at this level want proof that you can be trusted alone in the engine room at night. Expect pressure on four areas.

Safety first in every answer. When a question involves a fire, a leak or a breakdown, the first words should be about people and the ship: raise the alarm, inform the bridge, isolate, then fix. The guidance to examiners specifically says a candidate who fails a safety question gets another safety question[23].

Sequence, not definitions. Most questions are operational: how you start a main engine from cold, how you change over a purifier, how you put a generator on load. Give the steps in order and say what you check at each step.

Why it works. The responsible-level questions ask why: why the starting air valve has a flame arrester, why you blow down the gauge glass in a set order, why the purifier needs a water seal. Rote answers fail here; the 2026 committee report said exactly that[30].

Rules with numbers. Know the numbers you will use on watch: the 15 ppm limit for oily bilge discharge under MARPOL Annex I, the 0.50% global and 0.10% ECA sulphur limits under MARPOL Annex VI Reg. 14, the steering gear test before departure under SOLAS Ch. V Reg. 26, and the emergency generator start under SOLAS Ch. II-1 Reg. 43. Read what oral examiners look for for more.

Why do candidates fail the MEO Class 4 oral?

Candidates rarely fail because they never studied. They fail because of how they answer. The DGMA's own technical committee found that many entry-level candidates arrive with no structured revision after sea service and that rote learning fails them in orals[30]. The common patterns:

  • Reciting a book paragraph. The examiner interrupts with "on your ship, how?" and the candidate has nothing.
  • Missing the first safety action. Jumping to the repair before raising the alarm or stopping the machine.
  • Guessing numbers. A wrong ppm or pressure said with confidence does more harm than "I would check the manual".
  • No sketch skills. Not being able to draw the fuel system or a purifier bowl.
  • Weak Function 3. Engineers study machines and neglect MARPOL, LSA and fire-fighting.
  • Booking too soon. Sitting all four functions in the first month after sign-off with no mock practice.

If you fail one function you only repeat that function[10]. Read what happens if you fail the MMD oral and why seafarers fail oral exams.

What happens after the MEO Class 4 oral: results, re-attempts and validity?

Results become final after approval by the Chief Examiner of Engineers[6]. If you disagree with a written or oral result, you can apply for a review on Form 31 under Rule 77 of the MS (STCW) Rules 2014 within 30 days of the result[15].

A failed subject can be retaken at any later exam, and passed subjects are kept[10]. We found no published cap on attempts.

When you pass everything, the examiner issues an Examiner's Authority. It works as your CoC for one year or until the certificate arrives, whichever is earlier[31]. The CoC is dispatched within seven working days after scrutiny[15]. A CoC must be revalidated every five years; see CoC revalidation in India and how long a CoC is valid.

Once you hold Class IV you can sit MEO Class II Part A straight away, with no sea service needed[32].

What does MEO Class 4 cost, and what if you fail a function?

At 2014-schedule rates: 4 x Rs 1,000 written + 4 x Rs 1,000 oral + Rs 3,000 eligibility enquiry = Rs 11,000 for a first-time pass[33][34]. Paying a function's fee covers both papers in it, such as MEK General with MEK Motor[15].

MEO Class 4 re-sit scenarios
ScenarioRuleCost
Fail Function 5 oralPassed functions kept; re-sit only Function 5[10]Rs 1,000
Fail in a combined oralFailure recorded per function[25]Rs 1,000 per failed function
Absent"Failed (Absent)"[15]Fee lost; book again
First attempt on or after 1 Jan 2027One-month preparatory course mandatory[9]Institute fee
ReviewForm 31 within 30 days[15]Rs 6,000[34]

What changed for MEO Class 4 in 2025 and 2026?

2026 brought the biggest changes to the engineering exams in years.

  • New portal. All eligibility assessment and seat booking moved to exams.dgma.gov.in, with Bharatkosh payment[7].
  • Cross-centre booking. From November 2026, if your parent MMD has no written seats for a subject, you can book another MMD in the last two days of the window[29].
  • Kandla centre. MMD Kandla became the seventh MEO Class IV assessment centre from November 2026[8]. See all MMD exam centres.
  • Mandatory preparatory course from 1 January 2027. DGMA EAC Branch Circular No. 49 of 2026 makes a one-month (120-hour, fully offline) MEO Class IV preparatory course compulsory for first-time candidates and for anyone who did not sit any Class IV function during 2026[9][21]. Institutes may start these courses from 1 November 2026[35]. If you are eligible now, sitting at least one function before the end of 2026 keeps you outside the rule.
  • ETO to MEO pathway. Circular No. 50 of 2026 opened a route for certified ETOs to earn MEO Class IV[36].
  • Steam or motor endorsement. Circular No. 65 of 2026 clarified that Class I or II holders can add the other endorsement by a Class IV oral after a simulator course[20].

Where can you practise for the MEO Class 4 oral?

Practise out loud. Reading answers is not the same as saying them under questioning. Start with the topic pages, test recall with the MCQ banks, then run timed mock orals. Our AI voice examiner is in development: it asks questions aloud, listens, follows up like an examiner and scores you. Join early access.

Oral practice

12 oral questions with model answers

Read the question, answer it out loud as if the examiner is across the table, then open the model answer and mark yourself honestly.

–0/12 done
  1. 1
    CoreEngine maker's instructions (scavenge fire procedure)

    You are on watch and the main engine scavenge temperature on one unit starts rising quickly. What do you do?

    Model answer points
    • Treat it as a scavenge fire until proved otherwise: inform the bridge and ask to slow down. Check the unit's exhaust temperature, look for smoke or sparks from scavenge drains.
    • Call the Chief Engineer.
    • Increase cylinder lubrication on the affected unit and cut fuel to that unit if the engine design allows.
    • Close the scavenge drain cocks so burning oil and sparks are not blown into the engine room; keep people clear of the scavenge relief valves.
    • If the fire grows, stop the engine, engage turning gear and use the fixed scavenge fire-fighting system (CO2, steam or water mist, per design).
    • Do not open the scavenge space until it has cooled, to avoid a fresh air supply and explosion.
    • After: inspect rings, liner and piston; find the cause (blow-by, poor combustion, excess cylinder oil, dirty scavenge space).
    The examiner may follow up with
    • What causes a scavenge fire?
    • How would you check the piston rings afterwards?
    How did you do?
  2. 2
    CoreEngine maker's instructions

    Walk me through starting a two-stroke main engine from cold in port.

    Model answer points
    • Warm the jacket water with the pre-heater to the maker's temperature.
    • Start lube oil, camshaft oil (if fitted), cooling water and fuel oil pumps; check pressures and that fuel is at injection viscosity.
    • Drain and check starting air bottles and the main starting valve; open the air supply.
    • Check the indicator cocks are open and blow through the engine on air with turning gear disengaged, watching for water or fuel from the cocks.
    • Close indicator cocks, take over control from the bridge or control room, test the telegraph and emergency stop.
    • Try the engine on air ahead and astern, then on fuel at dead slow.
    • Check exhaust temperatures, pressures and that the cylinder lubricators are working.
    The examiner may follow up with
    • Why do you blow the engine through?
    • What if water comes out of an indicator cock?
    How did you do?
  3. 3
    CoreSOLAS Ch. II-1 Reg. 27

    What is a crankcase explosion and how do you prevent it?

    Model answer points
    • A hot spot (bearing, piston rod gland, chain) heats lube oil; oil vapour condenses as a fine oil mist.
    • If the mist reaches the explosive range and meets the hot spot, a primary explosion occurs; air rushing in after it can cause a stronger secondary explosion.
    • Prevention: good lube oil supply and temperature, bearing temperature monitoring, oil mist detector, correct clearances.
    • Protection: crankcase explosion relief valves with flame arresters, required for larger engines under SOLAS Ch. II-1 Reg. 27.
    • If the oil mist alarm sounds: reduce speed, stop the engine, keep people away from the crankcase doors, do not open them until the engine has cooled.
    The examiner may follow up with
    • How does an oil mist detector work?
    • Why wait before opening crankcase doors?
    How did you do?
  4. 4
    CoreSTCW Code Table A-III/1

    How do you parallel an incoming generator with the running one?

    Model answer points
    • Start the incoming generator, let it reach rated speed and voltage.
    • Match voltage (voltmeter) and frequency (slightly higher than the bus).
    • Check the phase sequence is the same (fixed at installation).
    • Watch the synchroscope turning slowly clockwise (fast direction); close the breaker just before the 12 o'clock position.
    • Share the load with the governor controls; balance kW and check kVAR sharing.
    • Then reduce load on the outgoing set if you are changing over.
    The examiner may follow up with
    • What happens if you close out of phase?
    • What does a reverse power relay do?
    How did you do?
  5. 5
    CorePurifier maker's instructions

    The fuel oil purifier is losing its water seal. What could be wrong?

    Model answer points
    • Wrong gravity disc for the fuel density (too large an inner diameter for heavier fuel).
    • Fuel temperature too high or too low, changing density.
    • Seal water not supplied, or too little.
    • Throughput too high.
    • Bowl not closing fully: worn main seal ring, dirty operating water system, low operating water pressure.
    • Sludge build-up in the bowl or a damaged disc stack.
    • Action: stop feed, check temperature and gravity disc, clean the bowl, check operating water, and inform the second engineer.
    The examiner may follow up with
    • How do you choose the gravity disc?
    • What is the difference between a purifier and a clarifier?
    How did you do?
  6. 6
    CoreSTCW Code Section A-VIII/2 Part 4-2

    What checks do you make in the engine room when you take over a watch?

    Model answer points
    • Standing orders and the Chief Engineer's night orders read and signed.
    • Machinery running, standby and any defects or work in progress; equipment isolated for maintenance.
    • Main engine, generator and boiler parameters against the log; alarms active or inhibited.
    • Bilge levels, tank levels (fuel, lube, sludge, bilge holding), any transfers in progress.
    • Steering gear, fire main pressure, emergency generator status.
    • Bridge orders: manoeuvring, restricted visibility, expected speed changes.
    • Do not take over if the off-going engineer is busy with an emergency; under STCW Code Section A-VIII/2 handover waits until it is dealt with.
    The examiner may follow up with
    • When can you refuse to take over?
    • What do you log at handover?
    How did you do?
  7. 7
    CoreSOLAS Ch. II-1 Reg. 32; boiler maker's instructions

    How do you blow down a boiler water gauge glass, and why in that order?

    Model answer points
    • Shut the water cock, open the drain: steam blows through the steam cock and glass.
    • Shut the steam cock, open the water cock: water blows through the water passage.
    • Shut the drain: water should rise quickly to the true level.
    • Open the steam cock: the level settles; compare with the other gauge glass.
    • Order matters so both passages are proven clear and a choked passage is not mistaken for a true level.
    • Use gloves and a face shield and stand to the side; a glass can shatter.
    The examiner may follow up with
    • What if the level returns slowly?
    • What would you do on low water level?
    How did you do?
  8. 8
    CoreMARPOL Annex I Reg. 15

    What are the discharge conditions for oily bilge water from the machinery space?

    Model answer points
    • Under MARPOL Annex I Reg. 15, outside special areas a ship may discharge only if it is en route, the oily mixture is processed through approved oil filtering equipment, and the oil content without dilution does not exceed 15 ppm.
    • The mixture must not come from cargo pump-room bilges on oil tankers or be mixed with cargo residues.
    • The 15 ppm alarm and automatic stopping device must work.
    • Record every operation in the Oil Record Book Part I (Reg. 17).
    • In special areas there are stricter conditions; follow MARPOL Annex I and the company SMS.
    The examiner may follow up with
    • What is the 15 ppm alarm checked with?
    • How do you make the ORB entry?
    How did you do?
  9. 9
    CoreMARPOL Annex VI Reg. 14

    What is the sulphur limit for fuel used outside and inside an Emission Control Area?

    Model answer points
    • Under MARPOL Annex VI Reg. 14, the global limit is 0.50% m/m since 1 January 2020.
    • Inside an SOx Emission Control Area the limit is 0.10% m/m.
    • An approved equivalent such as an exhaust gas cleaning system (scrubber) may be used under Reg. 4.
    • Before entering an ECA, change over to compliant fuel in time and record the date, time, position and tank volumes in the logbook.
    • Carrying non-compliant fuel for use is prohibited unless a scrubber is fitted.
    The examiner may follow up with
    • How do you calculate change-over time?
    • What is the bunker delivery note sample for?
    How did you do?
  10. 10
    CoreSOLAS Ch. III Reg. 19; SOLAS Ch. XI-1 Reg. 7; IMO Res. MSC.581(110) (replaced A.1050(27))

    You are told to enter a double-bottom tank for inspection. What must be done first?

    Model answer points
    • It is an enclosed space: work only under a permit to enter, approved by the responsible officer.
    • Isolate pipelines and pumps, ventilate thoroughly.
    • Test the atmosphere with calibrated instruments: oxygen, flammable gas, toxic gases (as relevant), at different levels.
    • Attendant at the entrance with communication; rescue equipment and breathing apparatus ready.
    • Keep ventilating and re-test during the work.
    • SOLAS Ch. XI-1 Reg. 7 requires a portable atmosphere tester on board, and SOLAS Ch. III Reg. 19 requires enclosed space entry and rescue drills at least every two months.
    The examiner may follow up with
    • What oxygen reading do you need?
    • Why do people die trying to rescue others?
    How did you do?
  11. 11
    DeeperSOLAS Ch. V Reg. 26

    How do you test the steering gear before departure?

    Model answer points
    • Under SOLAS Ch. V Reg. 26 the steering gear is checked and tested within 12 hours before departure.
    • Test the main and auxiliary steering gear, remote control systems, steering positions on the bridge, the emergency power supply.
    • Check rudder angle indicators against actual rudder position.
    • Test alarms for power failure and low oil level, and the communication between bridge and steering gear room.
    • Check full movement of the rudder.
    • Emergency steering drills are held at least every three months.
    The examiner may follow up with
    • How fast must the rudder move?
    • What is the emergency steering procedure?
    How did you do?
  12. 12
    TrapMARPOL Annex I Reg. 15

    The oily water separator reads 14 ppm while the ship is alongside. Can you pump bilges overboard?

    Model answer points
    • No. The 15 ppm limit applies only when the ship is en route and outside restrictions; in port you do not discharge bilges overboard.
    • Inside special areas or certain coastal or port waters, discharge may be banned or limited by MARPOL and local law.
    • Use the bilge holding tank and send it to a shore reception facility; record it in the ORB.
    • The meter reading is not permission: every condition of Reg. 15 must be met, not just the ppm.
    The examiner may follow up with
    • When can you use the ship-to-shore connection?
    How did you do?

Reading answers is not the same as saying them. Our AI voice examiner asks these out loud, listens to your answer, asks the follow-up and marks you against the rule. Join early access or try the free timed mock oral drill.

Frequently asked questions

What is the pass mark for the MEO Class 4 oral?

You need at least 60% in each oral and at least 50% in each written paper[6]. Each function is marked on its own, so you can pass three and resit the fourth.

How many orals are there in MEO Class 4?

There is an oral for each of the four Part B functions[4]. You can instead choose one combined oral that covers all four[5].

How much sea time do I need for MEO Class 4?

At least 6 months of approved sea service recorded in a TAR book, with at least 4 months of watchkeeping on main propulsion machinery or UMS duties for a motor certificate[3]. See CoC sea time requirements for how service is counted.

Is the MEO Class 4 preparatory course compulsory?

From 1 January 2027 it is mandatory for first-time candidates and for anyone who did not sit any MEO Class IV function in 2026[9]. It lasts one month (120 contact hours) and is fully offline[21].

Do GME and B.Tech marine engineers sit Part A?

No. Approved four-year marine engineering graduates and degree holders who completed approved GME training are exempt from all Part A subjects[17]. They go straight to Part B after sea service.

Can I take the MEO Class 4 oral before the written papers?

Yes. Orals and written papers are booked per function and you may take them in the order and number you choose[15]. The guidance to examiners says the oral is independent of your written result[23].

Where are MEO Class 4 exams held?

At the MMD assessment centres including Mumbai, Kolkata, Chennai, Noida, Kochi, Visakhapatnam and, from November 2026, Kandla[7][8]. See MMD exam centres.

How do I book the MEO Class 4 exam in 2026?

Only through exams.dgma.gov.in, during the monthly window in the engineering exam notice[7]. Book at your parent MMD in the first six days; other centres open only if yours is full[29].

What is the MEO Class 4 exam fee?

Fees are charged per function and shown on the portal at booking, paid through Bharatkosh[15]. We could not find a current published fee table, so check the portal before you pay; see MMD exam fees.

Can I postpone my MEO Class 4 oral?

Not online. Once booked, the month cannot be changed and a no-show is recorded as 'Failed (Absent)'; the MMD may reschedule within the same month only in genuine, documented cases[15].

What happens if I fail one function?

You resit only that function at a later exam; your other passes stand[10]. If you think the marking was wrong, apply for review on Form 31 within 30 days[15].

How long after passing do I get the MEO Class 4 CoC?

The examiner issues an Examiner's Authority that serves as your CoC for up to one year[31]. The CoC itself is dispatched within seven working days after scrutiny[15].

Do you get the MEO Class 4 orals result on the same day?

Often, yes. The examiner may tell you the oral result at the exam centre, but every MEO result is formally declared only after the Chief Examiner of Engineers approves it[24].

Sources 36 documents

Each number in the text links to the source below. Labels show the type of source; see our editorial policy.

  1. Official DGMA: MMD Mumbai About Us · 13 November 2026
  2. Official TEAP Manual Part A (Consolidated Rev. 1, 1 May 2015), Chapter III, Tables III/0-1 and III/0-2 · 1 May 2015
  3. Official TEAP Manual Part A (Consolidated Rev. 1, 1 May 2015), Chapter III, Section III/16, Table III/16-1 · 1 May 2015
  4. Official TEAP Manual Part A (Consolidated Rev. 1, 1 May 2015), Chapter III, Section III/1 para 6.5 · 1 May 2015
  5. Official TEAP Manual Part A (Consolidated Rev. 1, 1 May 2015), Chapter III, Section III/16 para 8.7 · 1 May 2015
  6. Official TEAP Manual Part A (Consolidated Rev. 1, 1 May 2015), Chapter III, Section III/16 para 10 · 1 May 2015
  7. Official DGMA Notice to Engineering candidates for CoC Written examination, November 2026 · 26 October 2026
  8. Official DGMA notice: Commencement of MEO Class IV examinations at MMD Kandla (19.10.2026) · 19 October 2026
  9. Official DGMA EAC Branch Circular No. 49 of 2026 · 15 August 2026
  10. Official TEAP Manual Part A (Consolidated Rev. 1, 1 May 2015), Chapter III, Section III/16 paras 8.2 and 9 · 1 May 2015
  11. Official TEAP Manual Part A (Consolidated Rev. 1, 1 May 2015), Chapter III, Section III/1 para 6.4 · 1 May 2015
  12. Official TEAP Manual Part A (Consolidated Rev. 1, 1 May 2015), Chapter III, Section III/16 para 5.9 · 1 May 2015
  13. Official TEAP Manual Part A (Consolidated Rev. 1, 1 May 2015), Chapter III, Section III/16 para 4.1 · 1 May 2015
  14. Official TEAP Manual Part A (Consolidated Rev. 1, 1 May 2015), Chapter III, Section III/16 paras 1.4-1.5 · 1 May 2015
  15. Official DG Shipping Engineering Wing FAQs: E-Governance and E-Pariksha (2024) · 1 January 2024
  16. Official TEAP Manual Part A (Consolidated Rev. 1, 1 May 2015), Chapter III, Section III/16 para 5.1 · 1 May 2015
  17. Official TEAP Manual Part A (Consolidated Rev. 1, 1 May 2015), Chapter III, Section III/16 para 12.2; Instructions to Examiners Circular No. 118 · 1 May 2015
  18. Official DGS Instructions to Examiners Circular No. 118 (25.11.2011) · 25 November 2011
  19. Official DGMA EAC Branch Circular No. 50 of 2026, para 6 · 21 August 2026
  20. Official DGMA EAC Branch Circular No. 65 of 2026 · 29 September 2026
  21. Official DGMA EAC Branch Circular No. 49 of 2026, Annexure I · 15 August 2026
  22. Official DGS Instructions to Examiners Circular No. 071 (3 Aug 2004) · 3 August 2004
  23. Official DGS Instructions to Examiners: Guidelines on conducting Orals (MEO 1998 Rules), 1 March 2000 · 1 March 2000
  24. Official DGS Instructions to Examiners Circular No. 67 (14 July 2004) · 14 July 2004
  25. Official DG Shipping, Instructions to Examiners: Guidelines on conducting Orals (MEO 1998 Rules), Issue 00, 1 March 2000 · 1 March 2000
  26. Official DG Shipping Engineering Wing, FAQ on e-Governance and e-Pariksha
  27. Official Exam Notice for Engineering Grade CoC candidates appearing in June 2026 (29.05.2026) · 29 May 2026
  28. Official DGS Circular No. 16 of 2026 · 16 March 2026
  29. Official DGMA Notice to candidates appearing for MEO Class II and Class IV written examinations (2 Nov 2026) · 2 November 2026
  30. Official DGMA EAC Branch Circular No. 49 of 2026, Part A · 15 August 2026
  31. Official TEAP Manual Part A (Consolidated Rev. 1, 1 May 2015), Chapter III, Section III/16 para 11.2 · 1 May 2015
  32. Official TEAP Manual Part A (Consolidated Rev. 1, 1 May 2015), Chapter III, Section III/16 para 8.3 and note to Flow Diagram III/3 · 1 May 2015
  33. Official Merchant Shipping (STCW for Seafarers) Rules, 2014, G.S.R. 546(E), Schedule (Fees, see Rule 78), Gazette pp. 129-132 · 30 July 2014
  34. Official Merchant Shipping (Standards of Training, Certification and Watch-keeping for Seafarers) Rules, 2014, G.S.R. 546(E), Gazette of India, 30 July 2014 · 30 July 2014
  35. Official DGMA EAC Branch Circular No. 49 of 2026, paras VII-VIII · 15 August 2026
  36. Official DGMA EAC Branch Circular No. 50 of 2026 · 21 August 2026

Where should you go next?

  • Oral topics14 pages: examiner questions with model answer points, deck and engine
  • Question banks7 pages: free MCQ sets with answers and explanations
  • Free tools4 pages: mock oral drill, lights trainer, sea-time calculator, practice tests
Exam Prep DeskMaritime exam researchers

We write from the conventions (STCW, COLREG, SOLAS, MARPOL), the authorities' own notices and published syllabi, and cite the source for every fee, rule and date. We are independent and not linked to any maritime administration or test provider. Found an error? It matters at sea: tell us and see how we correct · Disclaimer.

Related guides

AI voice mock oral

Say it out loud before the examiner asks.

Our examiner asks CoC oral questions by rank and function, listens to your answer, asks the follow-up and scores you against the rule. Early access is open for India first.

  • Deck and engine, every rank
  • Answers referenced to the conventions
  • Independent, not linked to any authority
WhatsApp us