On this page
- Key facts
- What is the second mate Function 3 oral?
- How is the second mate oral split by STCW function?
- What is asked in the second mate Function 3 oral?
- How does the Function 3 syllabus turn into examiner questions?
- How is the Function 3 oral conducted?
- What happens on the day of the Function 3 oral?
- What do examiners probe hardest in the Function 3 oral?
- What do weak and strong Function 3 answers sound like?
- Why do candidates fail the second mate Function 3 oral?
- How should you structure a Function 3 answer?
- Which situational questions come up in the Function 3 oral?
- How should you prepare for the Function 3 oral in four weeks?
- How do you book or re-book only the Function 3 oral?
- If you fail Function 3, what can you book next?
- What should you have ready on oral day?
- What changed for the Function 3 oral in 2025 and 2026?
- Where can you practise Function 3 questions out loud?
- What kind of questions should you expect? 35 Function 3 practice questions
- 35 practice questions
- Frequently asked questions
- Sources
Key facts
- Function
- Controlling the operation of the ship and care for persons on board[1]
- Written paper
- Ship Construction, Stability, Ship Safety and Environment Protection[2]
- Oral fee
- ₹1,000 (2014 schedule)[3]
- Format
- One-to-one viva, run online even at the MMD[4]
- Panel
- Internal DGS/MMD and external examiners[5]
- Booking
- Any function on its own since July 2024[6]
- Re-attempt
- At least one month between attempts[7]
- Validity of a pass
- 5 years per function[8]
Checked 14 November 2026. Fees and rules change: confirm with the authority before you book.
What is the second mate Function 3 oral?
The second mate Function 3 oral covers "Controlling the operation of the ship and care for persons on board": MARPOL, stability, ship construction, fire fighting, life-saving appliances, first aid, MLC, ISM basics and leadership.
DGS Circular 07 of 2026 lists its competences as pollution prevention, maintaining seaworthiness (stability, trim, stress and watertight integrity, ship construction), fire fighting, life-saving appliances, medical first aid, monitoring legislative compliance, leadership and teamworking, and contributing to the safety of personnel and ship[1]. Its written paper is Ship Construction, Stability, Ship Safety and Environment Protection[2], and the oral fee is ₹1,000 under the 2014 schedule[3].
Function 3 is the widest syllabus of the three. It mixes numbers (GM, FWA, load line marks, MARPOL distances, LSA quantities) with judgement (fire, flooding, crew welfare). This page gives the syllabus by competence, how the oral runs, what examiners push on, a four-week plan and practice questions with model answers.
How is the second mate oral split by STCW function?
The second mate oral is not one exam. It is one oral per STCW function, booked and passed separately, and each pass stays valid for five years[8].
The STCW Code groups competence into seven functions, three of which belong to the deck officer at operational level[9]. The fee schedule in the MS (STCW) Rules 2014 lists a ₹1,000 written fee and a ₹1,000 oral fee for each function: Navigation, Cargo Handling and Stowage, Controlling the Operation of the Ship, and Radio Communications[3]. Form 29 records the orals as NAV, CARGO and SOF, plus Signals[3]. The signal examination has a visual part held separately at the MMD and an oral part asked inside the Function 1 oral; you pass Navigation only when the written, the signal visual and the oral are all cleared[7].
Since 1 July 2024 you may book any function you like, in any order, instead of all at once[6]. You can sit a function's oral only if that function's written is booked or awaiting result; a failed written in that function bars its oral until you clear it[6]. DGS Circular 07 of 2026 now publishes the Second Mate oral (preparatory) syllabus in its Annexure II, set out function by function[1]. If you want the whole exam in one place, start with the second mate oral exam guide; our page on what STCW functions are explains the terms.
| Function | Written papers | Oral | Our guide |
|---|---|---|---|
| Function 1: Navigation at the operational level | Celestial Navigation; Terrestrial and Coastal Navigation; Bridge Equipment and Watchkeeping; Meteorology | Yes, and the signals oral is asked inside it; a separate signal visual test is held at the MMD | Function 1 oral guide |
| Function 2: Cargo handling and stowage at the operational level | Cargo Handling and Stowage | Yes | Function 2 oral guide |
| Function 3: Controlling the operation of the ship and care for persons on board at the operational level (this page) | Ship Construction, Stability, Ship Safety and Environment Protection | Yes | Function 3 oral guide |
| Radio communications | Covered by the GMDSS certificate route | No separate MMD oral; the GMDSS certificate must be held before the CoC is issued | GMDSS topic |
What is asked in the second mate Function 3 oral?
Circular 07 of 2026 sets out eight Function 3 competences, from MARPOL discharge criteria and IMO intact and grain stability criteria to MLC 2006 and leadership[1].
For fire fighting, survival craft and medical first aid, the circular says competence is assessed from evidence of approved training under STCW Sections A-VI/3, A-VI/2 and A-VI/4[1]. In practice examiners still ask what you would do in a fire, how you launch a lifeboat and how you treat a casualty, because those are the officer's duties on board.
| STCW competence | What examiners ask about | Study pages | Practice |
|---|---|---|---|
| Ensure compliance with pollution prevention requirements | MARPOL Annexes I to VI discharge criteria, special areas, ECAs, record books, SOPEP, oil spill response | MARPOL, oily water separator, sewage and incinerator, ballast water management | MARPOL MCQ |
| Maintain seaworthiness: stability | GM, KG by moments, list, free surface, GZ curve, IMO intact and grain criteria, load lines, FWA, TPC, trim, partial loss of buoyancy | Ship stability, free surface effect, metacentric height | Stability MCQ, stability calculations |
| Maintain seaworthiness: construction and watertight integrity | Main structural members, framing systems, collision bulkhead, double bottom, watertight doors and closures | Ship construction | SOLAS MCQ |
| Prevent, control and fight fires | Fire triangle, classes and extinguishers, fixed CO2, detection, fire control plan, fireman's outfit, hot work | Fire fighting, engine room fire systems | Fire and LSA MCQ |
| Operate life-saving appliances | Lifeboats, liferafts, HRU, lifebuoys, lifejackets, immersion suits, EPIRB, SART, drills and launching | Life-saving appliances, GMDSS | Fire and LSA MCQ |
| Apply medical first aid | CPR, bleeding, burns, hypothermia, casualty from an enclosed space, radio medical advice | Emergency procedures, enclosed space entry | SAR MCQ |
| Monitor compliance with legislative requirements | SOLAS, MARPOL, Load Line, STCW, ISM and ISPS basics, certificates the OOW should know | SOLAS, ISM Code, ISPS Code | SOLAS MCQ, ISM and ISPS MCQ |
| Leadership, teamworking, safety of personnel | MLC 2006 basics, complaints, rest hours, training juniors, risk assessment, permits to work | MLC 2006 | MLC MCQ |
How does the Function 3 syllabus turn into examiner questions?
Annexure II groups Function 3 into pollution prevention, seaworthiness (stability, trim and stress, IMO intact and grain stability criteria, watertight integrity, construction), fire fighting, LSA, medical first aid, legislative compliance, leadership including MLC 2006, and safety of personnel[1]. Fire fighting, survival craft and first aid are judged partly from your approved training[1].
| Syllabus item (official source) | What the examiner is checking | Typical opening question (our wording) | Likely follow-up | Where to revise |
|---|---|---|---|---|
| MARPOL discharge criteria | Annex I, IV, V, VI limits and records | "Where can you discharge food waste?" | "What goes in the Garbage Record Book?" | MARPOL, MARPOL MCQ |
| Stability, trim and stress tables | GM, free surface, trim calculation | "What is free surface effect and how do you reduce it?" | "The ship lolls to port. List or loll?" | Ship stability |
| IMO intact stability criteria | IS Code numbers | "State the intact stability criteria." | "Where do you check them on board?" | Ship stability MCQ |
| Watertight integrity | Doors, vents, closing appliances | "Which openings must be closed at sea?" | "Who checks watertight doors and how often?" | Ship construction |
| Ship construction | Members, stresses, nomenclature | "Sketch a midship section of a bulk carrier." | "What is a bracket and why is it there?" | Ship construction |
| Fire fighting | Classes, systems, fire party organisation | "Fire in the galley. Your actions?" | "Can you use CO2 in the engine room with people inside?" | Fire fighting, fire and LSA MCQ |
| Life-saving appliances | SOLAS III equipment and drills | "What is in a lifeboat?" | "How often is the lifeboat launched?" | Life-saving appliances |
| Medical first aid | MFA actions; casualty handling | "A crew member falls into a hold. What do you do?" | "How do you get radio medical advice?" | Emergency procedures |
| Legislative compliance | SOLAS, MARPOL, certificates | "Name the statutory certificates on your ship." | "Which is issued by class and which by flag?" | SOLAS |
| Leadership, teamwork, MLC 2006 | Hours of rest, complaints, welfare | "What are the hours of rest under MLC?" | "A rating complains about food. What do you do?" | MLC 2006, MLC MCQ |
| Safety of personnel and ship | Permits, PPE, enclosed spaces | "When do you need a permit to work?" | "Rescue from an enclosed space: who goes in?" | Enclosed space entry |
How is the Function 3 oral conducted?
The Function 3 oral is a one-to-one viva, normally online, before a panel of internal DGS and MMD examiners and external examiners[5].
At the MMD the oral still runs on an online platform[4]. Many examiners open with a stability calculation or a MARPOL discharge question, then move to a fire or abandon-ship scenario on your last ship: where the muster station was, how the lifeboat was launched, who released the CO2. Keep a notepad ready for working a stability sum out loud.
The DGS rubric marks articulation, logical sequence, understanding, application and composure[5]. We found no official oral length or deck pass mark.
What happens on the day of the Function 3 oral?
The online rules are the same as for the other functions: 0930 attendance in formals, two cameras and a clear desk[10]. Expect at least one stability sketch, so have pencil and blank paper ready[10].
| When | What happens | What you need |
|---|---|---|
| 3-5 days before | Trial call on both devices; speed test on fast.com | 5 Mbps or more on each device, loaded latency 150 ms or less[10] |
| By the second-last day of the previous month | No email or admit-card date yet? Email the MMD | The admit-card date is final; schedules are not published[10] |
| Evening before | Set up a quiet, well-lit room with desk, chair and lockable door; charge the UPS or inverter | No other person may be in the room[10] |
| Before 0930 | Primary device facing you; secondary behind you showing your back and the room, mic muted; no virtual background | Desk against a wall; no light behind you[10] |
| 0930 | Attendance; be reachable | Formal clothes; unreachable means absent[10] |
| Link arrives | Join on both devices as "Guest" with your full name and wait | Examiner checks audio, video and room[10] |
| Identity check | Show documents to the camera | Admit card, CDC, passport, STCW certificates[10] |
| During the oral | Video on, mic unmuted, look at the camera; sketch when asked | Only blank paper, pencil, eraser and pen on the desk[10] |
| If the link drops | Rejoin at once; the examiner allows some time | After that you are treated as absent[10] |
| End | Let the examiner close the call | Ending it yourself means you are deemed failed; recording is misconduct[10] |
What do examiners probe hardest in the Function 3 oral?
Examiners probe the safety-critical numbers and the first actions in a fire or flooding, and they test whether you understand stability rather than only quote it.
- Stability reasoning. What happens to GM when you load on deck, fill a double bottom, or lift a weight. Angle of loll versus list.
- Load line. The marks, FWA and dock water allowance, worked as a short sum.
- MARPOL numbers. 15 ppm, sewage distances, sulphur limits, record-book retention, special areas.
- Fire. Classes, the right extinguisher, fixed CO2 release sequence, boundary cooling.
- LSA. Quantities and servicing intervals; how to launch and recover a lifeboat safely.
- People. MLC complaints and rest hours; leading a fire party; a casualty in an enclosed space.
Read stability calculations for orals and what oral examiners look for.
What do weak and strong Function 3 answers sound like?
Function 3 mixes calculation, regulation and emergency action. Examiners want exact numbers where the rule gives them and a safe sequence where it does not[1].
Examiner's note: "State the intact stability criteria." Weak: "GM must be positive." Strong: the IS Code general criteria: area under the GZ curve not less than 0.055 metre-radians up to 30 degrees and 0.09 up to 40 degrees (or the angle of flooding if less), and 0.03 between 30 and 40 degrees; GZ at least 0.20 m at an angle of 30 degrees or more; maximum GZ at not less than 25 degrees; initial GM not less than 0.15 m; then where the loading computer or stability booklet shows them.
Examiner's note: "Fire in the galley fryer." Weak: "Use water." Strong: raise the alarm, shut off the fuel or power to the fryer and the galley exhaust fan and dampers, use the fire blanket or wet chemical or appropriate extinguisher, never water on burning oil, boundary cool, muster the fire party and report to the bridge. See fire fighting.
Examiner's note: "Can you discharge food waste here?" Weak: "Yes, if it is ground." Strong: the candidate asks where "here" is. Outside special areas, comminuted food waste (passing a 25 mm screen) may go at 3 nautical miles or more from the nearest land and uncomminuted at 12 or more, en route; plastics never; special areas are stricter; and every discharge is entered in the Garbage Record Book. See MARPOL.
Why do candidates fail the second mate Function 3 oral?
Candidates fail Function 3 when they give a wrong safety number, cannot do a simple stability sum aloud, or answer an emergency with theory instead of actions.
DGS found 2024 and 2025 oral performance not satisfactory and linked it to weak articulation and viva preparation[5]. In Function 3 the usual mistakes are:
- Correcting an angle of loll by pumping ballast to the high side.
- Not knowing the FWA formula or the order of load line marks.
- Saying plastics may be discharged if ground up, or confusing sewage and garbage distances.
- Releasing CO2 before a head count.
- Not knowing how many lifebuoys your ship carries or when liferafts are serviced.
- Treating MLC as a list of numbers with no idea of how a complaint is handled.
See why seafarers fail oral exams for more.
How should you structure a Function 3 answer?
For an emergency, give the first three actions in order, then the reports; for a regulation, give the rule and number first, then why it exists; for stability, state the principle, then work the sum.
- Emergency: raise the alarm, protect people, contain the hazard, then report and record.
- Regulation: "MARPOL Annex IV Regulation 11 allows... because..." Then name the record you keep.
- Stability: "Loading on deck raises G, so GM falls. New KG equals total moments over new displacement." Then do the arithmetic slowly, with units.
If you do not know a number, say where you would find it on board (the stability booklet, the SOLAS training manual, the fire control plan). Guessing a safety number is worse than saying you would check.
Which situational questions come up in the Function 3 oral?
Function 3 scenarios are mostly emergencies and compliance decisions on your watch.
- Oil on the water near your ship in port: stop operations, SOPEP, report.
- Fire in the galley at night: alarm, isolate power and fuel, first-attack extinguisher, close openings, boundary cooling.
- Crew member unconscious in a tank: do not go in alone; raise the alarm, rescue team with breathing apparatus.
- Ship takes a list after a double bottom was ballasted: is it a list or a loll?
- A rating complains about overtime pay: the on-board complaint procedure under MLC.
Model answers are in the questions below.
How should you prepare for the Function 3 oral in four weeks?
Spend week one on stability and load lines, week two on MARPOL, week three on fire fighting, LSA and first aid, and week four on construction, MLC, ISM and full mock orals.
Work one stability sum aloud every day; examiners notice hesitation with arithmetic more than with words. Spaced, out-loud practice helps retention[11].
| Week | Focus | Daily routine | Pages to use |
|---|---|---|---|
| 1 | Stability: GM, KG, list, free surface, GZ curve, criteria; load lines, FWA, TPC, trim | One calculation aloud, 10 MCQs, explain one curve | Ship stability, stability MCQ |
| 2 | MARPOL Annexes I to VI, record books, SOPEP, BWM | One annex a day with its numbers, 10 MCQs | MARPOL, MARPOL MCQ |
| 3 | Fire fighting, LSA, first aid, drills | Walk your last ship's fire control plan and muster list from memory | Fire fighting, LSA |
| 4 | Ship construction, watertight integrity, SOLAS, ISM, ISPS, MLC; full mocks | Two mock orals with follow-ups; fix weak answers | Ship construction, MLC 2006, mock oral drill |
How do you book or re-book only the Function 3 oral?
You book the Function 3 oral on the e-Examination Portal in the monthly window, choosing that function alone if the others are already passed or planned for later[6].
Only one examination booking is allowed per calendar month; inside it you choose written only, oral only, or both[12]. The fee is not refunded[3], and DGS warns that candidates who cannot meet the online-oral requirements should not book, because the fee is forfeited[13]. If you fail, keep at least one month between two attempts at the same oral; once all written papers of all functions are passed you may book an oral every month[7]. Booking and then not appearing also costs you at least a one-month gap[6]. The MMD exam booking guide shows each portal screen.
- 1Clear eligibility assessment
Fresh candidates complete eligibility assessment at their MMD; documents can be sent through the institute by post or courier, and seats can be booked once assessment is approved[13].
- 2
- 3Book in the monthly window
Windows are announced in DGMA notices. For November 2026, oral-only booking ran to 31 October at 18:00 with admit cards on 2 November[12].
- 4Pay once and wait
Do not pay twice; wait for payment confirmation. The portal helpdesk is [email protected][16].
- 5
- 6
- 7After a fail, decide: review or re-book
You may apply on Form 31 within 30 days for a review by a different examiner[3], or re-book after the one-month gap. See what happens if you fail an MMD oral.
If you fail Function 3, what can you book next?
You re-sit only Function 3; a failed Ship Construction, Stability, Ship Safety and Environment Protection paper blocks the oral until passed[7].
Fee arithmetic. Under the 2014 schedule each Function 3 attempt costs Rs 1,000 for the oral, and Rs 1,000 for the function's written if you must re-sit a paper[3]. Two oral attempts cost 2 x Rs 1,000 = Rs 2,000; a failed paper plus two orals costs Rs 3,000. Nothing is refunded[3].
| Scenario | Rule | What to book next | Fee (2014 schedule) |
|---|---|---|---|
| Failed the Function 3 oral, all written passed | One month between attempts; orals every month once all written are passed[7] | Function 3 oral in the next oral window | Rs 1,000[3] |
| Failed a Ship Construction, Stability and Safety written paper | No Function 3 oral until all its papers are passed[7] | That paper in the next Second Mate session (2026: May, July, September, November[19]) | Rs 1,000 for the written |
| Booked the oral, did not appear | At least one month break; fee forfeited[6] | Same oral, month after next | Rs 1,000 again |
| Online link failed and could not reconnect | Treated as absent[10] | Same oral after the gap | Rs 1,000 again |
| Failed twice; you think the second was unfair | Form 31 review within 30 days, by a different examiner; result final[3] | Review, or re-sit | Review Rs 6,000[3] vs re-sit Rs 1,000 |
| Other functions passed in 2022; this one still pending | Passed functions last five years from passing[8] | Finish this function before the oldest pass expires | - |
What should you have ready on oral day?
Have your admit card, original ID and the course certificates that support the competences the examiner may ask about; all relevant modular courses must be completed before the oral[13].
DGMA lists Form 29 from e-Samudra, sea service certificates, training certificates and a medical fitness certificate among the nautical exam documents[20]. For an online oral you must also meet Annex I of the 10 May 2021 notice on video-conferencing orals[13]: a quiet room, a working camera and microphone, and a stable connection. Use our MMD exam documents checklist and the oral exam day checklist, and read online oral exam tips before a video oral.
What changed for the Function 3 oral in 2025 and 2026?
Several SOLAS, MARPOL and STCW amendments in force in 2024 to 2026 touch Function 3, and DGS published the oral syllabus in 2026.
Examiners often ask "what is new?" A short list of amendments with dates shows you keep up.
| When | Change | Why it matters in the oral |
|---|---|---|
| Feb 2026 | Circular 07 of 2026 publishes the Function 3 oral syllabus[1] | The examiner's list of competences |
| 1 May 2024 | Garbage Record Book required from 100 GT[21] | Annex V record-keeping |
| 1 May 2025 | Mediterranean Sea SOx ECA, 0.10% sulphur[22] | Annex VI fuel change-over |
| 1 Jan 2026 | PFOS-containing fire-fighting foams prohibited[23] | Fire-fighting media question |
| 1 Jan 2026 | Annual thorough examination of lifeboats includes the ventilation system[24] | LSA maintenance question |
| 1 Jan 2026 | STCW basic training on preventing violence and harassment[25] | Leadership and personnel care |
| 27 Jun 2025 | Revised IMO enclosed space entry recommendations adopted[26] | Enclosed space rescue follow-ups |
Where can you practise Function 3 questions out loud?
Practise by answering out loud, under time pressure, to someone who asks follow-ups, because that is what the oral tests.
Saying answers aloud helps memory more than reading them silently[27], and testing yourself beats re-reading[28]. Run the questions below in our free mock oral drill, then check yourself with the oral readiness check. DGS also runs a structured oral preparatory programme with the Company of Master Mariners of India[5]; batches may be grouped function-wise according to failure trends[1]. We are building an AI voice mock examiner that asks questions aloud, listens and follows up like an examiner; you can join early access. Read how our mock orals work first.
What kind of questions should you expect? 35 Function 3 practice questions
The questions below are written by us around the published syllabus and the conventions; they are the kind of question to expect, not items from any exam paper.
They run core, deeper, then trap. They do not repeat the samples on our second mate oral exam page. Pair them with Function 1 (navigation) and Function 2 (cargo); the management-level version is the chief mate Function 3 oral.
Oral practice
35 oral questions with model answers
Read the question, answer it out loud as if the examiner is across the table, then open the model answer and mark yourself honestly.
- 1
What is metacentric height, and what do small and large GM mean for the ship?
Model answer points
- GM is the distance between the centre of gravity G and the transverse metacentre M; for small angles the righting lever GZ = GM × sin θ.
- Positive GM (M above G): the ship returns upright. Zero GM: neutral. Negative GM: unstable at upright and lolls.
- Small GM (tender ship): slow, easy roll, but little reserve against heeling forces.
- Large GM (stiff ship): quick, violent roll, stress on cargo lashings and discomfort.
- GM = KM − KG; KM from hydrostatic tables for the draught, KG from the loading condition, then corrected for free surface.
The examiner may follow up with- How do you find KM?
- How does rolling period relate to GM?
How did you do? - 2
Your ship displaces 10,000 t with KG 7.5 m. You load 500 t with its centre of gravity at 10 m above the keel. What is the new KG?
Model answer points
- Use moments about the keel: KG × displacement.
- Original moment = 10,000 × 7.5 = 75,000 t·m.
- Added moment = 500 × 10 = 5,000 t·m.
- New displacement = 10,500 t; new moment = 80,000 t·m.
- New KG = 80,000 ÷ 10,500 = 7.62 m (rounded).
- G rose by about 0.12 m, so GM falls by the same amount if KM does not change much.
The examiner may follow up with- How would you then find GM?
- What if the weight were loaded off the centreline?
How did you do? - 3
How do you find the list caused by shifting a weight across the ship?
Model answer points
- Shifting weight w a distance d across the ship moves G horizontally: GG1 = w × d ÷ displacement.
- tan(list) = GG1 ÷ GM (using fluid GM, corrected for free surface).
- Example: 100 t moved 10 m, displacement 10,000 t: GG1 = 0.1 m; with GM 1.0 m, tan θ = 0.1, list about 5.7°.
- To correct, move or ballast an equal moment to the other side.
- A list caused by an off-centre weight is different from a loll caused by negative GM.
The examiner may follow up with- What if GM is very small?
- How do you correct a list during loading?
How did you do? - 4
What is FWA and how do you calculate it?
Model answer points
- Fresh Water Allowance is the amount the ship's draught increases when she moves from sea water (1.025 t/m³) to fresh water (1.000 t/m³) at the same displacement.
- FWA (mm) = displacement (t) ÷ (4 × TPC), using summer displacement and TPC in sea water.
- Dock water allowance for density ρ: DWA = FWA × (1025 − ρ) ÷ 25, with ρ in kg/m³.
- Used when loading in a river or dock port: the ship may submerge the load line by the DWA, so she rises to the correct mark at sea.
- The F mark sits FWA above the S mark on the load line.
The examiner may follow up with- Worked example: displacement 20,000 t, TPC 25?
- What density does a hydrometer measure?
How did you do? - 5
Describe the load line marks on a ship's side.
Model answer points
- The deck line and the load line disc (circle with a horizontal line through the centre) mark the summer freeboard; the letters of the assigning authority beside it.
- S summer, at the level of the disc centre line.
- T tropical, 1/48 of the summer draught above S; W winter, 1/48 of the summer draught below S.
- F fresh water, FWA above S; TF tropical fresh, FWA above T.
- WNA winter North Atlantic, 50 mm below W, for ships not over 100 m in length.
- Timber ships have an additional set of timber load lines prefixed L.
The examiner may follow up with- What is the load line zone chart for?
- Who assigns freeboard?
How did you do? - 6
What does TPC mean and how do you use it?
Model answer points
- TPC is tonnes per centimetre immersion: the weight to load or discharge to change the mean draught by 1 cm.
- TPC = waterplane area (m²) × density ÷ 100 (density 1.025 in sea water).
- Use: estimate the change in draught for a small weight; final cargo top-off; FWA calculation.
- Valid only for small changes, because the waterplane area changes with draught.
- Read it from the hydrostatic tables for the current draught.
The examiner may follow up with- Why does TPC increase with draught?
- How does density change it?
How did you do? - 7
What are the discharge criteria for oily bilge water from the machinery spaces of a ship of 400 GT and above?
Model answer points
- The ship must be en route.
- Oil content of the effluent without dilution not more than 15 ppm.
- Processed through oil filtering equipment meeting Annex I Reg. 14, with a 15 ppm alarm and automatic stopping device where required.
- Not from cargo pump-room bilges of oil tankers, and not mixed with oil cargo residues.
- Recorded in the Oil Record Book Part I, which is kept for three years after the last entry.
- In special areas the same 15 ppm conditions apply, except the Antarctic area, where discharge is prohibited.
The examiner may follow up with- What is in the ORB Part I?
- What does the 15 ppm alarm do?
How did you do? - 8
What are the MARPOL Annex IV rules for discharging sewage?
Model answer points
- Annex IV applies to ships of 400 GT and above, or certified for more than 15 persons, on international voyages.
- Comminuted and disinfected sewage through an approved system: more than 3 nautical miles from the nearest land.
- Untreated sewage: more than 12 nautical miles from the nearest land, from a holding tank at a moderate rate, with the ship en route at not less than 4 knots.
- An approved sewage treatment plant may discharge anywhere, if the effluent produces no visible floating solids or discolouration.
- Special rules apply to passenger ships in the Baltic Sea special area.
The examiner may follow up with- What certificate covers Annex IV?
- What is a holding tank?
How did you do? - 9
What are the sulphur limits for fuel oil under MARPOL Annex VI?
Model answer points
- Outside Emission Control Areas: 0.50% m/m since 1 January 2020.
- Inside SOx ECAs: 0.10% m/m.
- Ships without a scrubber may not carry non-compliant fuel for use on board.
- ECAs include the Baltic, the North Sea, North America, the US Caribbean and, from 1 May 2025, the Mediterranean SOx ECA.
- Fuel change-over before entering an ECA is recorded with time, position and tank volumes.
The examiner may follow up with- What is a FONAR?
- What is an equivalent compliance method?
How did you do? - 10
What are the classes of fire, and which extinguishing medium do you use for each?
Model answer points
- Class A ordinary combustibles (wood, paper, cloth): water.
- Class B flammable liquids (oil, paint): foam, dry powder or CO2; not a water jet.
- Class C flammable gases: isolate the gas supply first; dry powder.
- Electrical fires: isolate power; CO2 or dry powder; no water or foam on live equipment.
- Class D metals (magnesium): special dry powder.
- Class F/K cooking oil (galley): wet chemical or fire blanket; never water.
The examiner may follow up with- Why not water on an oil fire?
- How do you use a fire blanket?
How did you do? - 11
What is on the fire control plan and where is it kept?
Model answer points
- General arrangement plans for each deck showing control stations, fire sections (A- and B-class divisions), fire detection and alarm systems, sprinklers, fixed fire-extinguishing systems, extinguishing appliances and their access.
- Means of access to compartments, ventilation system with fan controls and dampers, and their identification.
- Location of the international shore connection and firemen's outfits.
- Permanently exhibited for the guidance of officers; a duplicate kept in a weathertight enclosure outside the deckhouse for shore fire fighters.
- Kept up to date; in the working language and English.
The examiner may follow up with- What is the international shore connection?
- Who must know the plan?
How did you do? - 12
How many lifebuoys must a cargo ship carry, and how are they fitted?
Model answer points
- By length: under 100 m: 8; 100 m to under 150 m: 10; 150 m to under 200 m: 12; 200 m and over: 14.
- At least one each side with a buoyant lifeline at least twice the height of stowage above the waterline in the lightest seagoing condition, or 30 m, whichever is greater.
- At least half have self-igniting lights; at least two have self-activating smoke signals and quick release from the bridge.
- Distributed so they are readily available on both sides and on all open decks to the ship's side; marked with ship's name and port of registry.
- Inspected monthly with the LSA checklist (SOLAS III/20.7); survival craft and launching appliances are also checked weekly.
The examiner may follow up with- How do you test a self-igniting light?
- What colour is a lifebuoy?
How did you do? - 13
How often are lifeboats launched in drills, and how often are liferafts serviced?
Model answer points
- Each lifeboat is launched with its assigned crew and manoeuvred in the water at least once every three months during an abandon ship drill.
- Free-fall lifeboats: launched with crew at least once every six months, or simulated launching where allowed.
- Rescue boats: launched with crew and manoeuvred each month where reasonable, and in any case at least once every three months.
- Inflatable liferafts serviced at intervals not exceeding 12 months (extendable to 17 months where impracticable); some approved for extended intervals.
- Lifeboats and launching gear also have annual thorough examinations under MSC.402(96) as amended.
The examiner may follow up with- What does a weekly LSA inspection include?
- What is a hydrostatic release unit?
How did you do? - 14
What is a hydrostatic release unit and how does it work?
Model answer points
- It releases the liferaft automatically if the ship sinks before the raft is launched by hand.
- At a depth of a few metres, water pressure operates the release and frees the raft container.
- The raft floats up; the weak link in the painter breaks once the raft inflates and the ship pulls, so the raft is not dragged down.
- Disposable HRUs carry an expiry date (typically two years); serviceable units are serviced with the raft.
- Check the HRU is fitted correctly with the painter attached to the weak link, not to the ship.
The examiner may follow up with- What if the painter is fixed directly to the deck?
- How do you launch a liferaft by hand?
How did you do? - 15
How does MLC 2006 handle a seafarer's complaint on board?
Model answer points
- Every ship must have on-board complaint procedures for fair, effective and quick handling (Regulation 5.1.5).
- The complaint should be settled at the lowest possible level, but the seafarer may complain directly to the master or to appropriate external authorities.
- The seafarer may be accompanied or represented.
- No victimisation for filing a complaint.
- Seafarers receive a copy of the procedure, with contact details of the flag State and of a person on board who can give confidential advice.
- Records of complaints and decisions are kept.
The examiner may follow up with- What is the minimum age to work on a ship?
- What must a seafarer employment agreement contain?
How did you do? - 16
Explain the free surface effect correction and how you reduce it.
Model answer points
- A slack tank's liquid moves to the low side when the ship heels, shifting G sideways and acting as a virtual rise of G.
- Free surface correction (FSC) = sum of free surface moments ÷ displacement; fluid GM = solid GM − FSC.
- It depends on the tank's breadth (roughly breadth cubed), not on the amount of liquid in it.
- Reduce it: keep tanks full or empty, fill one slack tank at a time, use tanks with longitudinal divisions, avoid wide slack tanks.
- Particularly dangerous in fire fighting, where water builds up on decks.
The examiner may follow up with- Why does a centreline bulkhead reduce it to a quarter?
- Why is fire-fighting water dangerous to stability?
How did you do? - 17
What can you read from a GZ curve?
Model answer points
- Initial GM: slope at the origin; a tangent at the origin meets a vertical at 57.3° (1 radian) at a height equal to GM.
- Maximum GZ and the angle at which it occurs.
- Range of stability and the angle of vanishing stability.
- Dynamical stability: the area under the curve up to a given angle.
- The point of inflexion near deck edge immersion.
- Compare against the IMO intact criteria in the stability booklet.
The examiner may follow up with- What lowers the curve?
- How does a cross curve differ from a GZ curve?
How did you do? - 18
The ship starts to list after you fill a double bottom tank; she lies to port, then rolls over to a similar angle to starboard. What is happening and what do you do?
Model answer points
- A ship that flops from one side to the other at a similar angle has an angle of loll: GM is negative at upright and she finds equilibrium at an angle.
- Filling a wide slack double bottom tank added free surface before its weight could lower G.
- Correct by lowering G: fill a small, divided double bottom tank on the low side first (free surface briefly worsens), then the opposite side; or remove high weights.
- Never ballast the high side to correct a loll; when she flops over, the added weight makes the heel worse and she may capsize.
- Stop operations that add top weight; inform the master.
The examiner may follow up with- How do you tell loll from list?
- Why do you fill the low side first?
How did you do? - 19
What does the IMO intact stability code say about a ship's rolling period, and how do you use it?
Model answer points
- The rolling period is linked to GM: a long, slow roll means small GM; a short, quick roll means large GM.
- The IS Code gives an approximate formula, T = 2 × C × B ÷ √GM, with C from the Code; it is a check, not an exact method.
- On board, time several full rolls and compare with previous voyages or the booklet's guidance.
- A rolling period that lengthens during the voyage can warn of rising G (icing, water absorbed by cargo, free surface).
- Use it to confirm, not replace, the stability calculation.
The examiner may follow up with- What causes a ship's GM to fall during a voyage?
- What is synchronous rolling?
How did you do? - 20
What is a collision bulkhead and where must it be on a cargo ship?
Model answer points
- The forward watertight bulkhead, up to the bulkhead (freeboard) deck, to limit flooding after a bow collision.
- On cargo ships it is located not less than 0.05 L or 10 m (whichever is less) and not more than 0.08 L or 0.05 L + 3 m (whichever is greater) from the forward perpendicular, as SOLAS sets out.
- No doors, manholes or ventilation ducts below the bulkhead deck; only one pipe for fluid in the forepeak, fitted with a screw-down valve operable from above the bulkhead deck.
- It keeps the ship afloat with the forepeak flooded.
The examiner may follow up with- What is the forepeak tank used for?
- Why is the collision bulkhead not right at the bow?
How did you do? - 21
Explain longitudinal and transverse framing. Which ships use which?
Model answer points
- Transverse framing: frames run around the girth at close spacing with deck beams and floors; good for transverse strength; used on smaller general cargo ships.
- Longitudinal framing: stiffeners run fore and aft along the deck and bottom, supported by widely spaced web frames and transverses; better longitudinal strength against hogging and sagging.
- Long ships (tankers, bulk carriers) use longitudinal framing at deck and bottom, often with transverse framing at the sides (combined system).
- Key members: keel, floors, girders, side shell, deck plating, longitudinals, web frames, bulkheads.
- Circular 07 asks for general knowledge of the principal structural members and their names.
The examiner may follow up with- What is a bracket for?
- What is hogging?
How did you do? - 22
Walk me through releasing the fixed CO2 system into the engine room.
Model answer points
- Order to release comes from the master (or as the SMS says) after confirming the fire cannot be fought otherwise.
- Evacuate the space and take a head count: nobody may be left inside.
- Stop ventilation fans, close skylights, doors, fire dampers and all openings; stop fuel pumps and close quick-closing valves; stop machinery as needed.
- Open the release cabinet: the pre-discharge alarm sounds to warn anyone inside; then release the gas as per instructions on the cabinet.
- Keep the space closed long enough to cool; boundary cool; do not re-enter early, as fire can re-ignite.
- Re-entry only with breathing apparatus and ventilation after the master decides; record the event.
The examiner may follow up with- Why must fuel be shut off?
- What maintenance does a CO2 system need?
How did you do? - 23
You find a fire in the galley at night on watch. What do you do?
Model answer points
- Raise the fire alarm and inform the bridge or master; muster the fire party.
- Use the nearest suitable extinguisher on a small fire: for a cooking-oil fire, a fire blanket or wet chemical extinguisher; never water.
- Isolate the galley power and stop the exhaust fan; close the fire dampers and doors.
- Fire party in fireman's outfits with breathing apparatus; boundary cooling of surrounding spaces.
- Keep the bridge informed; prepare to escalate; account for all crew.
- Record and report; investigate the cause afterwards.
The examiner may follow up with- How do you organise boundary cooling?
- What causes most galley fires?
How did you do? - 24
How do you prepare a lifeboat for launching in a drill, and what are the safety points?
Model answer points
- Check the boat, falls, davit, brakes and on-load release gear are in good order; maintenance pennants or tricing pendants correctly used per manufacturer.
- Crew wear lifejackets and helmets; only the crew needed are in the boat during lowering where the SMS says.
- Remove gripes and harbour pins; check the sea and ship's side clear; engine tested.
- Lower under control from the brake; release falls only when waterborne (hydrostatic interlock in the correct position).
- Recovery: reset the hooks correctly and confirm before hoisting; many accidents happen here.
- Record the drill in the log.
The examiner may follow up with- What is an on-load release hook?
- Why have lifeboat drills caused deaths?
How did you do? - 25
What tests and checks do you carry out on an EPIRB and a SART?
Model answer points
- EPIRB: regular self-test as the manufacturer says (often monthly), check battery and HRU expiry dates, registration and the ship's identity programmed.
- Annual testing at intervals not exceeding 12 months, and shore-based maintenance at intervals not exceeding five years.
- Newer EPIRBs (installed from 1 July 2022) include GNSS and an AIS locating signal.
- SART: self-test, check battery expiry, observe its response on the ship's 9 GHz (X-band) radar during the test.
- Record checks in the GMDSS log; avoid false alerts, and if one occurs, cancel it and inform the RCC.
The examiner may follow up with- What do you do after a false EPIRB alert?
- How does a SART appear on radar?
How did you do? - 26
A crew member collapses inside a ballast tank. Walk me through the rescue.
Model answer points
- Do not enter alone or without breathing apparatus; the space is likely oxygen-deficient or toxic.
- Raise the alarm; call the rescue team and inform the bridge.
- Keep ventilation running; prepare breathing apparatus, rescue harness, tripod or lifting gear, stretcher, resuscitator.
- Rescuers enter with breathing apparatus, with a standby at the entrance and communication.
- Bring the casualty out; give CPR if needed; oxygen; radio medical advice.
- Report and investigate; enclosed space rescue drills are held at least every two months.
The examiner may follow up with- Why do many deaths in enclosed spaces involve rescuers?
- What gas readings must you have before entry?
How did you do? - 27
Give me the steps of adult CPR on board.
Model answer points
- Check the scene is safe; check response; shout for help and tell the bridge.
- Open the airway and check breathing (no more than about 10 seconds).
- If not breathing normally: start chest compressions, 30 compressions at about 100 to 120 a minute, about 5 to 6 cm deep, centre of the chest.
- Then 2 rescue breaths; continue 30:2.
- Use an AED if carried, as soon as it arrives.
- Continue until help arrives, the casualty recovers or you are exhausted; get radio medical advice.
The examiner may follow up with- How do you treat a burn?
- What is the recovery position?
How did you do? - 28
What is the SOPEP and what does it contain?
Model answer points
- Shipboard Oil Pollution Emergency Plan, required for oil tankers of 150 GT and above and other ships of 400 GT and above.
- Contents: reporting procedures (when and how to report), the list of authorities and contacts to call, steps to control the discharge, and procedures for coordinating with national and local authorities.
- Approved by the Administration; the contact lists in appendices kept up to date.
- Drills held as the SMS says; SOPEP equipment (absorbents, scuppers plugs, drums, shovels) kept ready.
- Noxious liquid carriers have an SMPEP; many ships combine both.
The examiner may follow up with- What is the first thing you do on finding an oil spill on deck?
- What reports are made after a spill?
How did you do? - 29
You are OOW in port and see an oil sheen spreading from your ship's side. What do you do?
Model answer points
- Stop all oil transfer, bunkering and pumping operations at once.
- Inform the master and the chief engineer; sound the alarm as per SOPEP.
- Find the source: overboard valves, hull, tanks, ballast or bilge discharge.
- Contain on deck if any (scuppers plugged, absorbents); report to port authority as SOPEP says.
- Record times, actions and quantities; keep evidence such as samples.
- Do not use dispersants without approval of the port State.
The examiner may follow up with- Who must you report to in an Indian port?
- Why keep oil samples?
How did you do? - 30
What should the OOW know about ISM non-conformities and near-miss reporting?
Model answer points
- The SMS requires reports of accidents, hazardous situations and non-conformities to the company, which investigates and analyses them (ISM Code para 9).
- A near miss is an event that could have caused harm or damage; reporting it helps prevent the accident next time.
- Report through the ship's forms; no blame culture is expected.
- Corrective actions are agreed, implemented and verified.
- The OOW's role: report honestly, take part in risk assessments and toolbox talks, follow permits to work.
The examiner may follow up with- What is a non-conformity?
- Who reviews the SMS on board?
How did you do? - 31
What are the ISPS security levels and what changes for the OOW?
Model answer points
- Level 1 normal: minimum protective measures at all times.
- Level 2 heightened: additional measures for a period of heightened risk.
- Level 3 exceptional: further specific measures when an incident is probable or imminent.
- OOW duties: access control at the gangway, identification checks, monitoring restricted areas, watch for suspicious craft, follow the Ship Security Plan.
- The ship's security level is set by the flag State; in port it must be at least that of the port facility.
The examiner may follow up with- Who is the SSO?
- What is a Declaration of Security?
How did you do? - 32
Trap: a crew member says plastics may go overboard if they are shredded first. Is that right?
Model answer points
- No. MARPOL Annex V prohibits the discharge of all plastics into the sea, shredded or not, everywhere.
- Plastics are kept on board and landed to reception facilities, or incinerated where allowed (not PVC in older incinerators).
- Record in the Garbage Record Book (required from 100 GT since 1 May 2024).
- Placards and the garbage management plan explain the rules to the crew.
The examiner may follow up with- What garbage may be discharged outside special areas?
- How long is the Garbage Record Book kept?
How did you do? - 33
Trap: can oily bilge water be discharged through the 15 ppm separator inside a special area such as the Mediterranean?
Model answer points
- Yes, for a ship of 400 GT and above, if all the conditions are met: en route, effluent not more than 15 ppm, approved oil filtering equipment with the alarm and automatic stop, not from cargo pump rooms or mixed with cargo residues.
- Exception: in the Antarctic area, any discharge of oil or oily mixture is prohibited.
- Record in the Oil Record Book Part I.
- Many candidates say "no discharge in special areas", which is wrong for machinery-space bilges.
The examiner may follow up with- What is different for cargo-area residues on tankers in special areas?
- Which are the Annex I special areas?
How did you do? - 34
Trap: a fire breaks out in the switchboard room. A crew member grabs a water hose. Is that correct?
Model answer points
- No. Water on live electrical equipment can electrocute the fire fighter and spread the fault.
- First isolate the electrical supply where possible.
- Use CO2 or dry powder on electrical fires; CO2 leaves no residue on equipment.
- After isolation and cooling, water spray may be used on surrounding Class A material if needed.
- Keep the space closed if using a fixed system; boundary cool.
The examiner may follow up with- What is the hazard of CO2 in a small room?
- Why is dry powder messy on electronics?
How did you do? - 35
Trap: is a ship with a positive GM always safe to sail?
Model answer points
- No. Positive GM only tells you about initial stability at small angles.
- The ship must also meet the IMO intact criteria: areas under the GZ curve, minimum GZ at 30° or more, angle of maximum GZ, and minimum GM, plus the weather criterion.
- A ship with small positive GM but poor range can capsize in heavy weather or when cargo shifts.
- Free surface must be included (fluid GM), and grain or timber cargoes have their own criteria.
- Check the full loading condition against the stability booklet before departure.
The examiner may follow up with- What is the weather criterion?
- What is the minimum initial GM in the IS Code?
How did you do?
Reading answers is not the same as saying them. Our AI voice examiner asks these out loud, listens to your answer, asks the follow-up and marks you against the rule. Join early access or try the free timed mock oral drill.
Frequently asked questions
What is Function 3 in the second mate oral?
Function 3 is "Controlling the operation of the ship and care for persons on board" at operational level, from STCW Table A-II/1. It covers pollution prevention, stability and construction, fire fighting, LSA, first aid, legislation and leadership.
Is stability calculation asked in the Function 3 oral?
Expect simple sums done aloud: new KG by moments, list from a shifted weight, FWA and dock water allowance, change of draught with TPC. Practise them with units until they are quick.
Which MARPOL annexes are asked at second mate level?
All six, mainly their discharge criteria and record books: Annex I oily bilge water, Annex IV sewage, Annex V garbage and Annex VI sulphur limits, plus SOPEP. Annex II and III are asked at a basic level.
How much is the Function 3 oral fee?
The MS (STCW) Rules 2014 schedule sets ₹1,000 for the oral of each second mate function. Fees are not refunded.
Do I need to know LSA numbers by heart?
Know the common ones: lifebuoy numbers by ship length, drill and launching intervals, liferaft servicing interval. If you are unsure of a number, say where you would check it rather than guess.
Is MLC 2006 part of Function 3?
Yes. Circular 07 lists MLC 2006 under leadership and teamworking. Know hours of rest, on-board complaint procedures and the basics of seafarer employment agreements.
How long is the Function 3 oral?
No official length has been published that we could find. The DGS preparatory programme gives at least 10 to 15 minutes per mock oral, but that is a practice session.
What is the most common fail point in Function 3?
Wrong answers on angle of loll correction, mixing up MARPOL discharge distances, and releasing CO2 before a head count are the mistakes we see most.
Can I take Function 3 before Functions 1 and 2?
Yes. Since July 2024 you can book any function on its own, as long as its written is booked, awaiting result or passed.
How many weeks should I prepare for Function 3?
About four focused weeks: stability and load lines, MARPOL, fire and LSA, then construction, MLC, ISM and mock orals.
What happens if I fail Function 3?
Re-book after at least one month and pay the fee again. You can also apply on Form 31 within 30 days for a review by a different examiner.
Are these questions from the MMD exam?
No. We write them around the published syllabus and the conventions. They show the kind of question to expect.
Sources 28 documents
Each number in the text links to the source below. Labels show the type of source; see our editorial policy.
- Official DGS Circular No. 07 of 2026 (NT Exam Circular No. 01 of 2026), Preparatory Course for Oral Examination leading to Nautical Grade CoC, 21 Feb 2026 · 21 February 2026
- Official DGS EAC Branch, Revised Time Table for November 2026 written examinations (2M FG, 1st Mate Ph-II, ASM, NWKO), 9 Oct 2026 · 9 October 2026
- Official Merchant Shipping (Standards of Training, Certification and Watch-keeping for Seafarers) Rules, 2014, G.S.R. 546(E), Gazette of India, 30 July 2014 · 30 July 2014
- Official DGS Notice F.No. 25-13011/11/2022-NT-DGS: booking for written and all oral examinations, May 2026 (27 Mar 2026) · 27 March 2026
- Official DGS Circular No. 07 of 2026 (NT Exam Circular No. 01 of 2026): Preparatory Course for Oral Examination leading to Nautical Grade CoC · 21 February 2026
- Official N.T. Wing/EAC Branch Nautical Circular No. 16 of 2024, 1 Jul 2024 · 1 July 2024
- Official DGS (NT/Exam) Circular 13 of 2022, 16 Jun 2022 · 16 June 2022
- Official NT Exam Circular No. 12 of 2022, 15 Jun 2022 · 15 June 2022
- Official STCW/CONF.2/34 Attachment 2: 2010 Manila amendments to the STCW Code, Part A Introduction · 25 June 2010
- Official DGS Notice dated 10 May 2021, Annexure I: Instructions to candidates for attending nautical oral examinations using online video-conferencing platform · 10 May 2021
- Research Cepeda et al. (2006) Distributed practice in verbal recall tasks · 1 May 2006
- Official DGMA Notice: Commencement of Seat Booking for Nautical Grade Competency Examinations, November 2026 (22 Oct 2026) · 22 October 2026
- Official DGS Notice F.No. 25-13011/11/2022-NT-DGS: booking for written and all grades of oral examinations for May 2026 · 27 March 2026
- Official DGS Notice: Operationalisation of New Examination Portal, 22 May 2026 · 22 May 2026
- Official DGS Notice: Operationalisation of Oral Examination Booking on New Examination Portal (26-05-2026) · 26 May 2026
- Official DGMA Notice: Commencement of Seat Booking for Nautical Grade Competency Examinations – October 2026 · 20 September 2026
- Official DGS Notice dated 1 Jun 2026: oral booking on new e-Examination Portal · 1 June 2026
- Official DGMA Nautical EAC Advisory, 31 Jul 2026 · 31 July 2026
- Official DGMA Nautical Wing latest news: 2026 written examination timetables and result notices · 9 October 2026
- Official DGMA Nautical Wing: Nautical Examinations
- Official IMO Resolution MEPC.360(79) (adopted 16 December 2022) · 16 December 2022
- Official REMPEC: Effective application of the Med SOx Emission Control Area under MARPOL Annex VI · 1 May 2025
- Official MGN 713 (M): Fire protection regulations - adoption of amendments in IMO resolutions in force on 1 January 2026 · 15 December 2025
- Official IMO: Amendments to IMO instruments - upcoming and recent entry into force dates
- Official IMO press briefing: Raft of shipping rules in force from 1 January 2026 · 1 January 2026
- Official IMO Resolution MSC.581(110) Revised recommendations for entering enclosed spaces aboard ships · 27 June 2025
- Research MacLeod et al. (2010) The production effect: Delineation of a phenomenon · 1 May 2010
- Research Roediger & Karpicke (2006) Test-Enhanced Learning, Psychological Science · 1 March 2006