On this page
- Key facts
- What is the MCA EOOW oral?
- Who can take the MCA EOOW oral?
- Do you have enough sea time for EOOW? Worked examples
- What else do you need for the EOOW CoC?
- What is the structure of the MCA EOOW oral?
- What is asked in the MCA EOOW oral? The syllabus by function
- How is the MCA EOOW oral run?
- How do you apply and book the MCA EOOW oral?
- Which written exams do EOOW candidates sit, and when?
- How much does the MCA EOOW oral cost?
- What does the EOOW oral cost if you fail? Worked totals
- How should you prepare for the MCA EOOW oral? A 10-week plan
- What do MCA examiners probe hardest in the EOOW oral?
- What separates a weak EOOW answer from a strong one?
- Why do candidates fail the MCA EOOW oral?
- What happens if you fail the EOOW oral?
- If you fail the EOOW oral, when can you sit again? A dated example
- What changed for UK engineer cadets in 2025–2026?
- How does the MCA EOOW route compare with India's MEO Class 4?
- Which rule dates matter for EOOW candidates, 2025 to 2028?
- What comes after the EOOW oral?
- 14 practice questions
- Frequently asked questions
- Sources
Key facts
- Authority
- Maritime and Coastguard Agency (MCA)
- Certificate
- EOOW Unlimited, STCW Reg. III/1, ships 750 kW+[1]
- Sea service
- 12 months combined: 6 months watchkeeping/UMS, 3 months workshop[2]
- Written exams
- Engineering Knowledge General plus Motor and/or Steam[2]
- Oral format
- Online oral on Microsoft Teams, recorded[3]
- NOE fee
- £220[4]
- Resit fee
- £159[3]
- Syllabus
- MIN 654 Amendment 1, section 3[1]
- Oral pass valid
- 3 years[5]
Checked 13 November 2026. Fees and rules change: confirm with the authority before you book.
What is the MCA EOOW oral?
The MCA EOOW oral is the oral exam for a UK Engineer Officer of the Watch (EOOW) Unlimited CoC under STCW Regulation III/1. It tests whether you can keep a safe engine-room watch, or act as duty engineer in an unmanned machinery space (UMS), on ships of 750 kW or more[1].
The oral is a single online session on Microsoft Teams, recorded from identity check to result[3]. Engineers do not sit the Part A test: MIN 690 applies Part A only to deck OOW and small-vessel master/yacht candidates[3].
Your CoC is limited to motor ships or steam ships depending on your sea service, Training Record Book (TRB) sections, written exams and oral[2]. Most candidates sit the motor oral. If you are coming from India, compare it with the MEO Class 4 oral.
Who can take the MCA EOOW oral?
You can take the oral once MCA issues an NOE. There are three main routes, and you must be at least 18[2].
| Route | Entry | Sea service and training | Written exams |
|---|---|---|---|
| UK cadetship or 1+1 programme | Approved college programme with college letter | 12 months combined: at least 6 months watchkeeping or UMS on ships of 750 kW+, 3 months workshop skills, the rest sea time or approved workshop/lab time, recorded in a TRB[2] | Engineering Knowledge General plus Motor and/or Steam; Foundation Degree or SPD may exempt[2] |
| Experienced seafarer programme | Engine ratings | 24 months on ships of 350 kW+ and an Engine Watch Rating, MEOL or SMEOL certificate[2] | Set by the college action plan |
| Alternative route | Graduates, HND holders, Royal Navy engineers, apprentices | Per MIN 511 and the Letter of Initial Assessment | Per the action plan |
Do you have enough sea time for EOOW? Worked examples
On the cadet route you need 12 months of combined sea service and workshop training, of which at least 6 months are watchkeeping or UMS duties on ships of 750 kW or more and 3 months are workshop skills training, all recorded in an approved TRB; you must also be at least 18[2]. Ratings on the experienced seafarer route need 24 months on ships of at least 350 kW plus an Engine Watch Rating, MEOL or SMEOL certificate[2]. A combined motor and steam endorsement needs 4 months of watchkeeping on each type[2].
The six cases below apply those rules. Add up your own months with the sea time calculator, and read what a Training Record Book is if your TRB is not complete.
| Candidate | Record | Ready for the NOE? | Why |
|---|---|---|---|
| A, cadet | 3 months college workshop, 7 months watchkeeping on a 12,000 kW container ship, 2 months day work at sea | Yes, motor | 3 + 7 + 2 = 12 months; watchkeeping 7 is above 6; workshop 3 meets 3 |
| B, cadet | 3 months workshop, 5 months watchkeeping, 4 months day work in the engine room | Not yet | Total is 12, but watchkeeping is 5, one month short of 6 |
| C, cadet | All 12 months done and TRB signed, but aged 17 on the application date | Not yet | The minimum age is 18 |
| D, cadet | 3 months workshop, 5 months watchkeeping on an 8,000 kW motor ship, 3 months on a steam LNG carrier, 1 month day work | Yes, motor only | Watchkeeping 5 + 3 = 8 meets the 6. A combined endorsement needs 4 months on each type, so steam is 1 month short |
| E, rating | 30 months on ships of 400 kW, holds an Engine Watch Rating (III/4) certificate and basic safety training | Yes, experienced route | 30 is above 24 months on ships of 350 kW or more |
| F, rating | 20 months in the engine room, holds an Engine Watch Rating certificate | Not yet | 4 more months needed to reach 24 |
What else do you need for the EOOW CoC?
Engine sea service must be in the engineering department. At least 75% of required sea service must be with the ship underway, and watchkeeping means at least 4 hours in every 24 on an engine-room watch[2]. For EOOW the watchkeeping can be in a subsidiary capacity. Testimonials must be signed by the chief engineer and state how much time was on watch or UMS duties.
You also need these courses[2]: PST, FPFF, Elementary First Aid, PSSR, PSCRB, Advanced Fire Fighting, Medical First Aid and HELM Operational. High Voltage Operational is optional, but without it your CoC is not valid on ships with systems over 1000 V. Cadets on approved programmes can use a college letter in place of the HV Operational certificate.
The written exams and the oral must both be passed within 3 years before the CoC is issued[2]. The Engineering Knowledge sections must be passed in one sitting; if you fail one section, you retake them all. Tick each item on the MCA oral documents checklist.
What is the structure of the MCA EOOW oral?
The EOOW oral is one oral session with an MCA engineer examiner. The examiner works through scenarios across the STCW functions on your CoC[2].
| Item | Detail |
|---|---|
| Format | Online oral on Microsoft Teams, recorded[3] |
| Length | Not fixed by MCA; a UK provider reports about 90 minutes[6] |
| Syllabus | MIN 654 Amendment 1, section 3[1] |
| Style | Routine, non-routine and contingency scenarios from the EOOW perspective[1] |
| Steam | Candidates for ships without steam boilers may omit boiler parts; the CoC is then limited |
| Result | Announced at the end with feedback, then by email[3] |
| Fee | £220 NOE covers the first oral[4] |
What is asked in the MCA EOOW oral? The syllabus by function
MIN 654 maps the EOOW oral to STCW table A-III/1 and adds the principles for keeping an engineering watch in STCW Code A-VIII/2 Part 4-2[1]. The table shows the four functions and where to revise each.
| Function | Competences | Typical oral topics | Revise here |
|---|---|---|---|
| 4 Marine engineering (operational) | Maintain a safe engineering watch; use English; use internal communications; operate main and auxiliary machinery; operate fuel, lubrication, ballast and other pumping systems | Taking over the watch, UMS checks, main engine starting and manoeuvring, purifiers, boilers, compressors, FWG, steering gear, bunkering | Engine-room watchkeeping, two-stroke main engine, auxiliary diesels, purifiers, boilers, air compressors, fresh water generator, pumps, steering gear |
| 5 Electrical, electronic and control engineering (operational) | Operate electrical and control systems; maintain and repair electrical equipment | Synchronising generators, preferential trips, blackout recovery, earth faults, safe isolation, UMS alarms | Marine electrical systems, UMS and automation |
| 6 Maintenance and repair (operational) | Use hand and machine tools; maintain and repair machinery | Workshop safety, permits to work, overhauls, measurement, lifting | Pumps and pumping systems |
| 3 Controlling the operation of the ship (operational) | Pollution prevention; seaworthiness; fire; LSA; first aid; legislation; leadership | Oily water separator, Oil Record Book, sulphur rules, fire in the engine room, enclosed spaces, refrigeration safety | Oily water separator, fuel sulphur rules, MARPOL, fire-fighting, refrigeration, enclosed spaces |
How is the MCA EOOW oral run?
You sit the oral from home on Microsoft Teams. Log on at least 10 minutes early; being absent from the waiting room 10 minutes after the start is a fail[3]. You need photo ID, a private room, a laptop or tablet with camera on, about 10 Mbps, business formal dress and a calculator[3]. No AI tools, second screens or helpers: these count as malpractice[3].
Engineer examiners often ask you to sketch. Keep A4 paper and a pencil ready and practise drawing a purifier bowl, a fuel system, a cooling water system, an air compressor and a simple refrigeration circuit quickly and neatly. Hold the sketch up to the camera and talk through it. Use the oral exam day checklist.
How do you apply and book the MCA EOOW oral?
You apply with form MSF 4275 and pay £220[4]. MCA aims to process an NOE within 28 days and to issue the CoC within 14 days of receiving the pass and documents[7]. See our Notice of Eligibility guide.
- 1Finish the TRB and workbook
Your chief engineer and training officer must sign off every task; incomplete TRBs delay the NOE.
- 2Collect testimonials
Each must show sea time, watchkeeping or UMS duties and the ship's power in kW.
- 3Complete MSF 4275
Tick EOOW Unlimited, motor or steam or both; list ships and dates.
- 4Pay £220 and email [email protected]
Attach scans of passport, ENG1, discharge book, course certificates and the college letter[5].
- 5Book from the NOE email
Pick a date you can keep; moving it inside 21 days loses the fee unless circumstances are exceptional[3].
- 6Sit the oral and send the result
Email the result and any outstanding documents to [email protected].
Which written exams do EOOW candidates sit, and when?
Candidates who are not exempt pass the MCA EOOW Engineering Knowledge exams, General plus Motor and/or Steam, at an approved centre[2]. From August 2025 new cadets follow the modernised syllabus and take digital Engineering Knowledge assessments instead; those who started before August 2025 can sit the written exams until April 2028[8]. IAMI runs all EOOW assessments for the MCA[9]. The EOOW digital diets start in May 2027[10]. Full dates are in our written exams guide.
| Assessment | Dates |
|---|---|
| EOOW Engineering Knowledge (written) | 16 Oct 2026, 4 Dec 2026, 5 Feb 2027, 19 Mar 2027, 14 May 2027, 9 Jul 2027 |
| EOOW digital assessment: General | 14 May 2027, 9 Jul 2027 |
| EOOW digital assessment: Motor or Steam | 13 May 2027, 8 Jul 2027 |
How much does the MCA EOOW oral cost?
The MCA charges one NOE fee for the first oral and a resit fee if you fail.
What does the EOOW oral cost if you fail? Worked totals
The NOE costs £220 and includes the first oral[4]. A failed oral adds a £159 resit fee before the MCA issues a new NOE[3]. There is no Part A online test for engineers; Part A applies to some deck NOEs only[3]. We added each total twice.
Written exam entry fees are set by the exam centre, and the MCA does not publish them. If you think a written paper was marked wrongly, an administrative check costs £25 and must be asked for within 8 weeks[11]. Remember the Engineering Knowledge sections must be passed in a single attempt[2]: failing one section means paying to sit the set again.
| Scenario | MCA fees paid | Total |
|---|---|---|
| Pass at the first attempt | £220 NOE (first oral included)[4] | £220 |
| Fail once, pass at the second attempt | £220 + £159 | £379 |
| Fail twice, pass at the third attempt | £220 + £159 + £159 | £538 |
| Fail three times, pass at the fourth attempt | £220 + (3 × £159 = £477) | £697 |
How should you prepare for the MCA EOOW oral? A 10-week plan
Start from your TRB: every task you signed off is fair game. Then go system by system, always asking "how does it work, what can go wrong, what do I do on watch?". Speak your answers aloud and sketch as you talk.
Use the main engine MCQ, pumps and purifiers MCQ, boilers MCQ, electrical MCQ and refrigeration MCQ to check facts, then the mock oral drill for spoken practice. Our AI voice examiner in early access asks follow-ups like a real examiner.
| Week | Focus |
|---|---|
| 1 | Watchkeeping: taking over, UMS rounds, alarms, handing over, calling the chief engineer |
| 2 | Main engine: starting, reversing, manoeuvring, scavenge fire, crankcase explosion |
| 3 | Generators and auxiliaries: alternators, paralleling, preferential trips, blackout |
| 4 | Fuel and lube oil: purifiers, viscosity, bunkering, fuel changeover for ECAs |
| 5 | Boilers, compressors, starting air, fresh water generator |
| 6 | Pumps, steering gear, refrigeration and air conditioning |
| 7 | Pollution: OWS, Oil Record Book, sewage, garbage, sulphur rules |
| 8 | Safety: engine-room fire, fixed systems, enclosed spaces, permits to work |
| 9 | Full mocks with sketches; record and review |
| 10 | Fix weak areas; test room, camera and internet |
What do MCA examiners probe hardest in the EOOW oral?
MCA examiners want a watchkeeper who will not hurt himself, the plant or the sea. Expect:
- Alarms and abnormal conditions. "High scavenge temperature on unit 3. What do you do?"
- Blackout recovery. The sequence to restore power and restart essential services.
- Pollution. Overboard discharge rules for bilge water, the Oil Record Book, what to do when the OWS alarms.
- Safe working. Isolation and lock-out before maintenance, hot work permits, enclosed space entry.
- Fundamentals. Why a centrifugal pump will not prime, how a purifier separates oil and water, why compressors have intercoolers.
Our guides on what oral examiners look for and how to answer oral exam questions help structure answers.
What separates a weak EOOW answer from a strong one?
The EOOW examiner tests scenarios from the point of view of a watchkeeper on ships of 750 kW or more[1]. Four contrasts:
Examiner's note: High scavenge air temperature on one unit. A weak answer: "It is a scavenge fire, so I stop the engine." A strong answer: "I check the other units and the trend first, inform the bridge and the chief engineer, reduce load, and look for the signs of a scavenge fire: sparks or smoke from the drains, high exhaust temperature on that unit. If it is a fire, I follow the maker's procedure, slow down, increase cylinder lubrication, and keep the scavenge space closed until it is safe." The examiner wants the reasons as well as the actions.
Examiner's note: Oily water separator alarm. A weak answer: "I reset the alarm and carry on." A strong answer stops the discharge, checks that the three-way valve has returned the flow to the bilge tank, finds the cause (emulsion, a dirty filter, a faulty sensor), records the event in the Oil Record Book Part I, and tells the chief engineer. It quotes MARPOL Annex I Reg. 15 as the discharge rule.
Examiner's note: Blackout. A weak answer starts with "start the generator". A strong answer first confirms the emergency generator has taken the emergency switchboard, informs the bridge, finds why the main supply tripped before restarting anything, starts and connects a generator, then restarts essential services in order: steering, lubricating oil, cooling, fuel, then the main engine when the bridge asks.
Examiner's note: Maintenance on a pump. A weak answer: "I switch it off and open it." A strong answer isolates it electrically and mechanically, locks and tags out, checks it is not under pressure or temperature, gets the permit the SMS requires, and only then opens it.
Study the topic pages for engine-room watchkeeping, the oily water separator, the emergency generator and the two-stroke main engine, then speak the answers aloud in the mock oral drill.
Why do candidates fail the MCA EOOW oral?
Common reasons:
- Unsafe actions. Opening a crankcase door straight after an oil-mist alarm, or entering a tank without a permit. A fundamental safety error can bring a sea-service penalty before a resit[5].
- Book answers with no watch actions. Describe the machine, then say what you check and do.
- Weak electrics. Many candidates cannot explain synchronising or earth faults.
- Poor sketches. Practise until each takes under two minutes.
- Admin problems. Late logon, phone as device, someone in the room.
More in why seafarers fail oral exams.
What happens if you fail the EOOW oral?
You apply for a resit NOE with a £159 fee[3]. The minimum gaps are 2 weeks before the second attempt, 6 weeks before the third (with all other documents already sent) and 3 months before the fourth; a fifth attempt needs 3 more months at sea[3]. You can appeal within five working days[3]. A pass is valid for 3 years and the CoC for 5 years[5].
If you fail the EOOW oral, when can you sit again? A dated example
Count each wait from the previous attempt. MIN 690 Amendment 6 sets two weeks before the second attempt, six weeks before the third with every other CoC document already submitted, three months before the fourth and later, and 3 months of sea service before you apply for a fifth[3]. The example starts with a first oral on 9 December 2026 and assumes a fail each time.
In practice each resit also needs a resit NOE, and the MCA aims to process NOE applications within 28 days[12]. Book only a date you can keep: inside 21 days a cancellation loses the fee unless the reason is exceptional[3]. MSN 1856 Amendment 1, the older notice, still shows two weeks before the third attempt[13]; MIN 690 Amendment 6, updated on 13 May 2026, is the newer rule[14].
The 3-year window matters for cadets. Written exams and the oral must both be passed within 3 years before the CoC is issued[2]. A cadet who passed Engineering Knowledge on 16 October 2026 has until October 2029 for the whole set, so four fails as below still fit, but a long gap at sea between attempts can push the written pass out of date.
| Attempt | Date in this example | Earliest next attempt | What must happen first |
|---|---|---|---|
| 1st oral: fail | 9 Dec 2026 | 23 Dec 2026 (2 weeks) | Pay the £159 resit fee and get a resit NOE[3] |
| 2nd oral: fail | 20 Jan 2027 | 3 Mar 2027 (6 weeks) | Every other CoC document already with the MCA (signed TRB, written passes, safety courses, ENG1)[12] |
| 3rd oral: fail | 10 Mar 2027 | 10 Jun 2027 (3 months) | A new resit NOE and £159; rework the feedback areas |
| 4th oral: fail | 16 Jun 2027 | Not before 16 Sep 2027, and only after 3 months of sea service | Complete 3 months at sea before applying for a 5th attempt[3] |
What changed for UK engineer cadets in 2025–2026?
- Modernised syllabus from August 2025 with new content on alternative fuels and decarbonisation[8].
- Digital assessments replace the written EOOW exams for new cadets; old written exams stop from April 2028[8].
- Earlier digital diets were cancelled for lack of applicants; the first EOOW digital diet is May 2027[10].
- MIN 654 syllabus extended to 1 May 2027[1].
- MSF 4275 revision 10/26 keeps the £220 NOE fee[4].
How does the MCA EOOW route compare with India's MEO Class 4?
MEO Class IV is the Indian operational-level engineer CoC, the counterpart of EOOW. Both are STCW III/1, but India splits the exam into many written papers and function orals. The table sets out the published rules. For the Indian side in full see our MEO Class 4 oral guide, MEO Class 4 vs Class 2 and MMD oral vs MCA oral.
| Point | UK EOOW (MCA) | India MEO Class IV (DG Shipping/MMD) |
|---|---|---|
| Sea service | 12 months of combined sea service and workshop training, with at least 6 months watchkeeping on ships of 750 kW+[2] | 6 months of approved sea service recorded in a TAR book[15] |
| Written papers | Engineering Knowledge General plus Motor and/or Steam[2] | Part A: four papers[16]; Part B: written papers and orals in four functions[17] |
| Oral format | One online oral on Microsoft Teams, recorded[3] | One candidate at a time before two examiners[18]; a combined oral covering all four functions is an option[19] |
| Pass mark | The examiner gives pass or fail with feedback at the end[3] | At least 50% in each written paper and 60% in each oral[20] |
| Fees | £220 NOE, then £159 per resit[4][3] | Paid each time you apply and never refunded[21] |
| Challenging a fail | Appeal within five working days[3] | Form 31 review within 30 days, at the MMD where you sat[22]; Rs 6,000 for an operational-level result[21] |
Which rule dates matter for EOOW candidates, 2025 to 2028?
The same changes in date order. If you are a cadet, the start date of your course decides which assessment you take.
| Date | Change | What it means for you |
|---|---|---|
| Aug 2025 | New EOOW cadets take digital Engineering Knowledge assessments under the modernised syllabus[8] | Started before Aug 2025: written exams still open to you until April 2028 |
| 10 Apr 2026 | MIN 710 Amendment 1 sets dates to the end of 2026/27[9] | Written EOOW diets on 4 Dec 2026, 5 Feb, 19 Mar, 14 May and 9 Jul 2027[10] |
| 21 Apr 2026 | MIN 654 syllabus expiry extended to 1 May 2027[1] | The oral syllabus stays the same into 2027 |
| 13 May 2026 | MIN 690 Amendment 6 last updated[3] | Current Teams, recording and resit rules |
| 8 Jun 2026 | Earlier EOOW digital diets removed for lack of applicants[10] | The first EOOW digital assessment is May 2027 |
| 30 Sep 2026 | MIN 720 Amendment 1 published[8] | Confirms the 2028 end of the old written papers |
| Apr 2028 | Qualifications Scotland written exams in their current format cease[8] | Pass the written EOOW papers before then, or take the digital route |
What comes after the EOOW oral?
After 12 months as EOOW you can work towards the MCA second engineer oral, then the MCA chief engineer oral. See the UK overview and the marine engineer career path.
Oral practice
14 oral questions with model answers
Read the question, answer it out loud as if the examiner is across the table, then open the model answer and mark yourself honestly.
- 1
Walk me through taking over the engine-room watch.
Model answer points
- Arrive on time and fit for duty; do not take over during a manoeuvre or while dealing with a problem until it is resolved.
- Read the chief engineer's standing and special orders.
- Check machinery running, parameters and alarms; any defects or work in progress and isolations in place.
- Levels: bilges, tanks (fuel, lube oil, sludge, bilge), the day tanks; purifiers running.
- Steering gear, boilers and compressors status; any standby machinery.
- Fuel in use (and any ECA changeover planned), the bridge's manoeuvring plans.
- Only take over when satisfied; the relieved engineer stays until then.
The examiner may follow up with- When would you call the chief engineer?
How did you do? - 2
You get an oil mist detector alarm on the main engine. What do you do?
Model answer points
- Treat it as a possible hot spot and risk of crankcase explosion.
- Inform the bridge and reduce speed or stop as the procedure requires, after agreeing with the bridge.
- Keep people away from the crankcase doors and relief valves.
- Do not open crankcase doors until the engine has cooled for the period in the maker's instructions; air entering a hot crankcase can cause a secondary explosion.
- Keep lube oil circulating; check bearing temperatures and look for the cause before restart.
- Inform the chief engineer immediately and log it.
The examiner may follow up with- What are crankcase relief valves for?
How did you do? - 3
How do you recognise and deal with a scavenge fire?
Model answer points
- Signs: high exhaust temperature on the unit, high scavenge air temperature, surging turbocharger, smoke or sparks from scavenge drains, paint blistering on the scavenge trunk.
- Inform the bridge; reduce speed; cut fuel to the affected unit if allowed; increase cylinder lubrication.
- Keep scavenge drains closed; small fires burn out.
- If it spreads, stop the engine and use the fixed scavenge fire extinguishing system (CO2, steam or water mist depending on design).
- Afterwards inspect the scavenge space, rings and liner before restart.
The examiner may follow up with- What causes scavenge fires?
How did you do? - 4
Explain how a fuel oil purifier separates water from oil.
Model answer points
- Centrifugal force in the rotating bowl throws the heavier water outward and lets the lighter oil move inward.
- The interface between oil and water must sit in the right place; the gravity disc (or dam ring) sets it for a given oil density.
- A wrong gravity disc for the oil density causes oil in the water outlet (seal broken) or water in the oil.
- Heating the oil to the right temperature reduces viscosity and improves separation.
- Sludge is discharged periodically; modern units with a water transducer use a clarifier-type bowl without a gravity disc.
The examiner may follow up with- What causes a purifier to overflow?
How did you do? - 5
What is the limit for discharging machinery space bilge water, and what records do you keep?
Model answer points
- Outside special areas: only through approved oil filtering equipment, oil content without dilution not over 15 ppm, ship en route, and the equipment has an alarm and automatic stopping device.
- Inside special areas: the same 15 ppm limit through approved equipment with alarm and automatic stop, except the Antarctic area, where no oil discharge is permitted. The Polar Code also bans oil discharge in Arctic waters.
- These Reg. 15 conditions apply to ships of 400 GT and above.
- Every operation goes in the Oil Record Book Part I with date, position, quantity; the officer in charge signs and the master signs each page.
- Never bypass the 15 ppm monitor; that is a criminal offence in many states.
The examiner may follow up with- What are magic pipes and why do inspectors look for them?
How did you do? - 6
Your ship is entering an Emission Control Area. What do you do about fuel?
Model answer points
- Inside ECAs the fuel sulphur limit is 0.10% m/m, unless an approved equivalent such as a scrubber is used.
- Follow the written fuel changeover procedure and start early enough that the whole system is flushed before the boundary.
- Watch viscosity and temperature when changing from heavy to distillate fuel; avoid thermal shock to pumps.
- Record the date, time, position and tank volumes at start and completion in the logbook.
- Keep the bunker delivery notes and samples.
The examiner may follow up with- Which areas are ECAs for sulphur?
How did you do? - 7
You lose power at sea: blackout. What do you do?
Model answer points
- The emergency generator should start automatically and supply emergency services; check it has.
- Inform the bridge; the ship may be not under command.
- Find and fix the cause if obvious (for example a tripped generator or fuel problem); start a standby generator, check voltage and frequency, close its breaker onto the dead bus.
- Restore essential services in order: steering, lube oil and cooling pumps, fuel supply, then main engine when safe.
- Call the chief engineer; log times.
The examiner may follow up with- Why would the preferential trips have operated before the blackout?
How did you do? - 8
How do you parallel two generators?
Model answer points
- Start the incoming generator and bring it to rated speed and voltage.
- Match voltage with the running bus and adjust frequency so it is slightly higher than the bus.
- Check phase sequence and use the synchroscope (or lamps): the pointer should rotate slowly in the fast direction.
- Close the breaker just before the 12 o'clock position.
- Share the load equally by adjusting governors; balance reactive load with the AVRs.
The examiner may follow up with- What happens if you close the breaker out of phase?
How did you do? - 9
How often is the steering gear tested and what do you check?
Model answer points
- Within 12 hours before departure the steering gear is checked and tested, including the main and auxiliary gear, remote control systems, the steering positions on the bridge, the emergency power supply and the rudder angle indicators.
- Check full movement, the time to move, alarms and changeover.
- Emergency steering drills are held at least every three months, including direct control from the steering gear compartment.
- Record the tests in the log.
The examiner may follow up with- What is the required time for the rudder to move from 35 degrees one side to 30 degrees the other?
How did you do? - 10
What safety devices are on a main air compressor?
Model answer points
- Relief valves after each stage, sized for full capacity.
- Intercooler and aftercooler with drains, because water and oil in compressed air are hazards.
- Fusible plug or high air temperature trip after the last stage, in case of overheating.
- Low lube oil pressure trip and cooling water flow or temperature alarm.
- Bursting disc on the cooler casing in some designs.
- Air receivers have their own relief valves and fusible plug if they can be isolated.
The examiner may follow up with- Why is oil in the starting air line dangerous?
How did you do? - 11
Trap: You need to work on a seawater pump. How do you make it safe?
Model answer points
- Get the permit to work as the SMS requires.
- Isolate electrically: open the breaker, lock it and tag it; test that the motor will not start.
- Isolate mechanically: close and lock suction and discharge valves; check for back flow.
- Drain and vent the pump; confirm zero pressure.
- Only then open it; keep the isolation until the job is complete and signed off.
- The trap is trusting a closed valve without checking pressure or a breaker without locking it.
The examiner may follow up with- What is a lock-out tag-out system?
How did you do? - 12
Explain the basic vapour-compression refrigeration cycle.
Model answer points
- Compressor: raises the pressure and temperature of refrigerant vapour.
- Condenser: rejects heat to seawater, vapour condenses to a high-pressure liquid.
- Expansion valve: drops the pressure; part of the liquid flashes, temperature falls.
- Evaporator: liquid boils by taking heat from the cold room, leaving as low-pressure vapour.
- Superheat at the evaporator outlet protects the compressor from liquid.
The examiner may follow up with- What are the signs of a shortage of refrigerant?
How did you do? - 13
The auxiliary boiler gauge glass shows no water. What do you do?
Model answer points
- First make sure the burner is off: the low-water trip should have shut it down; if not, I shut off the fuel myself at once.
- Then blow through the gauge glass to find out whether the level is really low or the glass is blocked.
- If no water shows after the test, treat it as low water: do not add feed water to a possibly overheated boiler, because cold feed on hot tubes and furnace can cause cracking or rupture.
- Let the boiler cool and inform the chief engineer; inspect for damage before relighting.
- If the level shows normally after blowing through, find out why the glass blocked and why the feed control or alarm did not act.
- Log the event.
The examiner may follow up with- Why must you not feed a boiler that has run dry?
How did you do? - 14
What precautions do you take before and during bunkering?
Model answer points
- Agree the bunker plan: tanks, quantities, sequence, maximum filling (often about 90%), pumping rate and stop signals with the barge or terminal.
- Complete the bunker checklist; scuppers plugged, SOPEP equipment ready at the manifold, communications tested.
- Sound tanks before and during; watch the rate when topping off and change tanks before they fill.
- Take the drip sample at the manifold as required; keep the bunker delivery note.
- Record the operation in the Oil Record Book.
The examiner may follow up with- What do you do if oil spills on deck during bunkering?
How did you do?
Reading answers is not the same as saying them. Our AI voice examiner asks these out loud, listens to your answer, asks the follow-up and marks you against the rule. Join early access or try the free timed mock oral drill.
Frequently asked questions
Is there a Part A test for the MCA EOOW oral?
No. Part A applies only to deck OOW Unlimited and to small-vessel master and yacht OOW candidates. The EOOW oral is a single online oral on Teams.
How much sea time do I need for MCA EOOW?
On a cadet route, 12 months of combined sea service and workshop training, with at least 6 months on watchkeeping or UMS duties on ships of at least 750 kW and 3 months of workshop skills.
Can I get an EOOW CoC without being a cadet?
Yes. The experienced seafarer programme takes engine ratings with 24 months at sea and a watch rating, MEOL or SMEOL certificate. Graduates and Royal Navy engineers can use the alternative route under MIN 511.
What is the difference between motor and steam EOOW?
Your CoC is limited to motor or steam ships depending on your sea service, TRB, written exams and oral. A combined certificate needs 4 months of watchkeeping on each type.
Do I need High Voltage for the EOOW CoC?
It is optional. Without a High Voltage certificate your CoC is not valid on ships with electrical systems over 1000 V.
How much does the MCA EOOW oral cost?
The NOE application costs £220 and includes the first oral. A resit costs £159.
How long is the MCA EOOW oral?
MCA does not publish a fixed length. A UK provider reports about 90 minutes for MCA orals.
Do I need to sketch in the online oral?
Examiners often ask for sketches. Keep A4 paper and a pencil ready and show the sketch to the camera.
Can I take the EOOW written exams after April 2028?
No. Old-format written exams stop from April 2028. After that you take a modernised preparation course and the digital assessment.
How long is the EOOW oral pass valid?
Three years. Your written exam passes and oral must both be within 3 years before the CoC is issued.
Can an Indian MEO Class 4 holder sit the MCA EOOW oral?
Indian engineers usually work on UK ships with a CEC. To get a UK CoC, holders from accepted countries follow MSN 1857 section 9.3. See is an Indian CoC valid in the UK.
Is there a pass mark for the MCA EOOW oral, and when do you get the result?
How much does the EOOW oral cost if I fail twice?
Does day work in the engine room count toward EOOW sea time?
It counts toward the 12-month total on the cadet route, but at least 6 of those months must be watchkeeping or UMS duties on ships of 750 kW or more[2]. Ask your training officer to check the TRB before you apply.
Sources 23 documents
Each number in the text links to the source below. Labels show the type of source; see our editorial policy.
- Official MIN 654 (M) Engineering and Electro-technical Officer Oral Exam Syllabus, Amendment 1 (April 2026) · 21 April 2026
- Official MSN 1857 (M+F) Amendment 1: UK requirements for engineer officers and engineer operators
- Official MIN 690 Amendment 6: Guidance on MCA oral examination booking, NOEs and online oral examination processes · 13 May 2026
- Official MSF 4275 (Revision 10/26): Application for engineer officer CoC · 1 October 2026
- Official MSN 1856 (M+F) Amendment 1: UK requirements for master and deck officers
- Reported Chieftain Training: MCA Oral Exam and Part B Exam (training provider page)
- Official GOV.UK: Apply for a UK seafarer CoC (deck and engineer officers) · 21 February 2023
- Official MIN 720 (M) Amendment 1: Transforming seafarer training, the UK modernised officer qualifications syllabus · 30 September 2026
- Official MIN 710 (M) Amendment 1: Written and digital assessment dates, deck and engineer officers · 8 June 2026
- Official MIN 710 Amendment 1, Annex 2: Engineer officer assessment timetables 2026 to 2027 · 8 June 2026
- Official Qualifications Scotland MCA exams: FAQs
- Official GOV.UK: Deck officers and ratings (MCA guidance) · 9 May 2025
- Official MSN 1856 (M+F) Amendment 1: UK requirements for master and deck officers, sections 18.7-18.8 · 1 May 2022
- Official GOV.UK: MIN 690 publication page · 13 May 2026
- Official TEAP Manual Part A (Consolidated Rev. 1, 1 May 2015), Chapter III, Section III/1 para 6.4 · 1 May 2015
- Official TEAP Manual Part A (Consolidated Rev. 1, 1 May 2015), Chapter III, Section III/1, Table III/1-1 · 1 May 2015
- Official TEAP Manual Part A (Consolidated Rev. 1, 1 May 2015), Chapter III, Section III/1 para 6.5 · 1 May 2015
- Official DGS Instructions to Examiners Circular No. 071 (3 Aug 2004) · 3 August 2004
- Official TEAP Manual Part A (Consolidated Rev. 1, 1 May 2015), Chapter III, Section III/16 para 8.7 · 1 May 2015
- Official TEAP Manual Part A (Consolidated Rev. 1, 1 May 2015), Chapter III, Section III/16 para 10 · 1 May 2015
- Official Merchant Shipping (Standards of Training, Certification and Watch-keeping for Seafarers) Rules, 2014, G.S.R. 546(E), Gazette of India, 30 July 2014 · 30 July 2014
- Official DG Shipping Engineering Wing FAQs: E-Governance and E-Pariksha (2024) · 1 January 2024
- Official MIN 690 Amendment 6, section 7.2 · 8 April 2026