On this page
- Key facts
- What is asked in a marine engineer interview?
- What do interviewers focus on for each engineer rank?
- What main engine questions do engineers get?
- What purifier, boiler and auxiliary questions are asked?
- What MARPOL and fuel questions are engineers asked?
- What steering gear and electrical questions come up?
- What do Chief and Second Engineers get asked about management?
- What emergency scenarios are engineers asked about?
- What questions are Electro-Technical Officers asked?
- How should you answer engine interview questions?
- How do you prepare for a marine engineer interview?
- How does the engineer interview change with promotion?
- What does a full marine engineer mock interview sound like?
- What does a weak STAR answer look like for an engineer, and how do you fix it?
- What evidence should a Chief Engineer give for each duty in an interview?
- How should engineers answer ship-type questions on tankers, bulkers, container ships and gas carriers?
- Which engineer interview answers are red flags, and what should you say instead?
- What marine engineer interview questions should you practise?
- 15 practice questions
- Frequently asked questions
- Sources
Key facts
- Who asks
- Technical superintendent, fleet manager or a serving chief engineer
- Ranks covered
- Fourth, Third and Second Engineer, Chief Engineer, ETO
- Core topics
- Main and auxiliary engines, purifiers, boilers, OWS, fuel rules, steering gear, electrical, UMS, PMS
- Often paired with
- CES engine test and Marlins English test
- CES report
- Wrong-answer summary and benchmarking sent to the company[1]
- Spoken English (TOSE) guide
- Lower Intermediate for 2/E, 3/E, 4/E and ETO; Intermediate for Chief Engineer[2]
- Fuel sulphur
- 0.50% m/m outside ECAs, 0.10% m/m inside since 1 Jan 2020[3]
- Sample questions here
- 15, written by us, with model answers
Checked 14 November 2026. Fees and rules change: confirm with the authority before you book.
What is asked in a marine engineer interview?
A marine engineer interview tests whether you can keep a safe engine-room watch, run and maintain the machinery on the company's ships, follow MARPOL, and handle a blackout or fire without guidance.
The technical superintendent usually starts with your last ship: engine make and model, generators, purifiers, boiler, and the jobs you did. Then come knowledge questions and scenarios. The general process is on our shipping company interview page.
Many companies give an engine CES test first. The company sees which questions you got wrong[1], so revise weak areas with the CES engine practice set before the interview.
What do interviewers focus on for each engineer rank?
Junior engineers are tested on watchkeeping and the machinery in their care; a Second Engineer on the main engine and planning; a Chief Engineer on management, compliance and people.
| Rank | Must be strong on | Likely scenario | Revise |
|---|---|---|---|
| Fourth Engineer | Watchkeeping routine, purifiers, air compressors, fresh water generator, OWS | Purifier losing its seal; high bilge level | Engine-room watchkeeping, fuel oil purifiers, fresh water generator |
| Third Engineer | Generators, boilers, fuel and lube oil systems, bunkering support | Generator trip on load; boiler low water | Auxiliary diesel engines, marine boilers, air compressors |
| Second Engineer | Main engine overhauls, maintenance planning, bunkering, fuel changeover, team leading | Scavenge fire; crankcase oil mist alarm | Two-stroke main engine, fuel sulphur rules, pumps |
| Chief Engineer | Budget and spares, PMS, class surveys, PSC, emissions, crew management | PSC finds OWS defect; fuel off-spec | UMS and automation, oily water separator, MARPOL |
| ETO | Power management, switchboards, insulation, automation alarms, HV safety | Blackout and restore; earth fault | Marine electrical systems, steering gear |
What main engine questions do engineers get?
Main engine questions focus on how the two-stroke crosshead engine works, what goes wrong, and how you deal with a scavenge fire, crankcase oil mist alarm or loss of starting air.
| Area | What a good answer covers |
|---|---|
| Scavenge fire | Signs (high exhaust temperature on one unit, sparks from drains, high scavenge temperature); reduce load; cut fuel to the unit if possible; increase cylinder lubrication; keep it under watch; use the fixed system if it spreads; inspect when cool |
| Crankcase oil mist | Slow down or stop as per the alarm; do not open crankcase doors until cooled for the time the maker gives; find the hot spot (bearings, piston rod gland); risk of explosion if air enters |
| Starting air | Relief valves, flame arresters or bursting discs on the starting line, drain the receivers, check automatic valve |
| Performance | Indicator cards or electronic monitoring, Pmax and Pcomp, exhaust temperatures, turbocharger |
| Overhaul | Piston pull: isolation, turning gear engaged and locked, permit to work, lifting gear check |
Revise the two-stroke main engine topic and the main engine MCQ bank.
What purifier, boiler and auxiliary questions are asked?
Juniors are tested on purifiers, generators, boilers, compressors and the fresh water generator: how they work, how to start and stop them, and what to do when an alarm sounds.
- Purifiers. Gravity disc choice by oil density and temperature; why the water seal is lost; purifier versus clarifier; sludge discharge; safe dismantling. See fuel oil purifiers and the pumps and purifiers MCQs.
- Boilers. Low water level actions, gauge glass blow-down, safety valve setting, flame failure. See marine boilers and the boiler MCQs.
- Generators. Paralleling, load sharing, reverse power trip, preferential trips. See auxiliary diesel engines.
- Refrigeration. Cycle, faults, refrigerant record keeping. See refrigeration and air conditioning and the refrigeration MCQs.
What MARPOL and fuel questions are engineers asked?
Expect questions on the oily water separator and Oil Record Book under MARPOL Annex I, and on fuel sulphur limits, changeover and bunkering under Annex VI. These are areas where PSC detentions and criminal cases happen, so interviewers press hard.
- Annex I. Machinery-space bilge water may be discharged only en route, through approved equipment, with oil content not exceeding 15 ppm, and not in the Antarctic area. Every operation goes in the Oil Record Book Part I. See the oily water separator topic.
- Annex VI sulphur. 0.50% m/m outside ECAs and 0.10% m/m inside since 1 January 2020[3]. Carrying non-compliant fuel for use on board has been banned since 1 March 2020 unless an approved equivalent such as a scrubber is fitted[4]. The Mediterranean became a SOx ECA on 1 May 2025[5].
- Bunkering. Bunker delivery note, MARPOL sample, flashpoint. From 1 January 2026 SOLAS requires a supplier's declaration that the fuel meets the flashpoint requirement before bunkering[6].
- Energy efficiency. Chief Engineers should know EEXI and CII, which took effect from 1 January 2023[7].
Revise MARPOL, fuel sulphur rules and scrubbers and the MARPOL MCQ set.
What steering gear and electrical questions come up?
Steering gear questions test SOLAS performance requirements and the emergency steering drill. Electrical questions test blackout recovery, safe isolation and insulation testing.
Under SOLAS Ch. II-1 Reg. 29 the main steering gear must put the rudder from 35 degrees on one side to 35 degrees on the other at maximum ahead service speed and deepest draught, and from 35 degrees either side to 30 degrees on the other in not more than 28 seconds. SOLAS Ch. V Reg. 26 requires steering gear checks and tests within 12 hours before departure and emergency steering drills at least every three months.
For electrical work, know lockout-tagout, how to test for dead, insulation resistance testing, earth fault finding, and the emergency generator, which must start automatically and supply its loads within 45 seconds of a main power failure under SOLAS Ch. II-1 Reg. 43 (cargo ships). Revise steering gear, marine electrical systems and the marine electrical MCQs.
What do Chief and Second Engineers get asked about management?
Senior engineers are asked how they plan maintenance, control spares and budget, prepare for class and PSC, run the engine team and report to the office.
Topics include the planned maintenance system (running hours versus calendar versus condition-based), critical equipment under the ISM Code, handover between chiefs, the company's management of change, and how you train junior engineers. Working hours and rest for the engine team are also checked: STCW hours-of-rest rules have applied since 1 January 2012[8], and long overhauls in port are a common reason for breaches.
They will also ask about unattended machinery spaces: alarm systems, fire detection and bridge control requirements under SOLAS Ch. II-1 Part E. See UMS and automation and the ISM Code.
What emergency scenarios are engineers asked about?
Interviewers pick an engine-room emergency and ask for your actions in order. They listen for safety of people first, informing the bridge, and a clear technical sequence.
Common scenarios: blackout at sea, fire in the purifier room, flooding in the engine room, steering failure in a channel, crankcase oil mist alarm, high bilge level with a broken pipe, and a person injured in the engine room. Know your fixed fire-fighting system and when to release it, and the emergency procedures and fire-fighting topics. Enclosed spaces matter for engineers too: tanks, boilers, crankcases and void spaces; see enclosed space entry.
What questions are Electro-Technical Officers asked?
ETOs are asked about power generation and distribution, automation and alarm systems, high voltage safety and fault finding, plus the same safety and emergency questions as engineers.
| Area | What a good answer covers |
|---|---|
| Power management | Automatic start and synchronising of generators, load sharing, preferential trips, blackout restart sequence |
| Switchboards | Insulation monitoring, earth fault finding on an insulated system, breaker maintenance and testing |
| High voltage | Permit to work, isolation and earthing, test for dead, only authorised persons, correct PPE |
| Motors and drives | Insulation resistance trends, bearing condition, variable frequency drives and harmonics |
| Automation | Sensors and transmitters, alarm testing, UMS alarm routes, PLC faults |
| Navigation and communication support | Basic fault finding on radar, gyro and GMDSS power supplies where the company expects it |
Interviewers often ask you to explain a fault you found on board, step by step. Show a logical method: symptoms, drawings, measurements, isolation, fix, test, record. Revise marine electrical systems, UMS and automation and the marine electrical MCQs. The ETO CoC exam page covers the certificate itself.
How should you answer engine interview questions?
State the action first, then the reason, then the rule or maker's instruction. Use the names of the machines you actually ran.
Interviewers trust experience they can test. "On my last ship we had a 6-cylinder two-stroke with an electronic fuel system; I did unit overhauls with the second engineer" invites good follow-ups you can answer. If you only know the theory, say so. Guessing on a safety point, like when to open a crankcase door, is a quick way to lose the job. More help in how to answer oral exam questions.
How do you prepare for a marine engineer interview?
Plan two to three weeks: revise your rank machinery, rehearse emergency sequences, prepare your ship stories, then practise aloud.
- 1Check the company's ships
Find engine makes, ship types and whether they have scrubbers or LNG. That tells you what to revise.
- 2Take a CES-style test
Use the CES engine practice set and our practice test tool.
- 3Revise rank topics
Work through the oral topics in the rank table above.
- 4Write your machinery list
For your last two ships, list main engine, generators, boiler, purifiers, OWS and major jobs you did.
- 5Rehearse emergencies
Say the steps for blackout, scavenge fire and crankcase oil mist aloud until they are automatic.
- 6Practise with follow-ups
Use the mock oral drill and join early access for our AI voice examiner.
- 7Organise documents
Use the joining a new company checklist.
How does the engineer interview change with promotion?
Each step up moves questions from operating machines to planning work and leading people. A promotion interview tests the duties of the rank you are moving into.
A Third Engineer moving to Second should expect main engine and planning questions; a Second moving to Chief should expect budget, class, PSC and emissions. Read the marine engineer career path, and for the next CoC see the MEO Class 2 oral or MEO Class 1 oral.
What does a full marine engineer mock interview sound like?
A typical technical interview for a senior engineer runs 30 to 45 minutes and moves from your last ship to technical knowledge, an emergency, compliance and people. Below is our own example for a Chief Engineer candidate, with a note after each answer.
It is written by us to show the style. It is not taken from any company's interview. Junior engineers should read the Third Engineer and Second Engineer versions, which follow the same pattern at their level.
Interviewer: Tell me about your last ship and what you were responsible for. Candidate: A 75,000 dwt bulk carrier with a six-cylinder electronically controlled two-stroke engine, three generators and an exhaust gas economiser. I was Chief Engineer for six months. I owned the engine budget, the PMS, bunkering and all MARPOL records, and I had four engineers, an ETO and five ratings.
Examiner's note: Good. Facts first, then scope of responsibility, then the team. The interviewer now has five things to ask about. A weak answer is "a bulk carrier, everything was fine".
Interviewer: Your Second Engineer reports a crankcase oil mist alarm on the main engine at full sea speed. Walk me through it. Candidate: I go to the engine control room, tell the bridge, and reduce speed or stop as the alarm and the SMS require. Nobody goes near the crankcase doors. I check which unit the detector points to and look at bearing temperatures and the lube oil trend. The doors stay shut until the engine has cooled for the time the maker gives. Then we open with no naked lights, inspect bearings and the piston rod gland, find the hot spot and report to the office before restarting.
Examiner's note: Strong. People first, bridge informed, no early door opening, root cause before restart. Candidates who say "open the door to look" fail this question. Revise crankcase explosion.
Interviewer: How do you make sure the ship is compliant before entering an emission control area? Candidate: I check the changeover procedure in the SMS and calculate the time needed from the tank and pipe volumes. We start early enough to be on compliant fuel at the boundary. The time, position and volume of compliant fuel are recorded as Regulation 14 requires. Outside ECAs the limit is 0.50% and inside 0.10%[3].
Examiner's note: Good: the calculation and the record are named. A stronger answer adds the bunker delivery note and sample retention[9] and mentions viscosity and temperature control during changeover. See fuel sulphur rules and scrubbers.
Interviewer: A PSC officer asks to see the 15 ppm alarm working. What happens? Candidate: I ask the duty engineer to demonstrate with the officer watching. I show the calibration certificate, which must be within its validity[10], and the Oil Record Book Part I entries that match the bilge tank soundings.
Examiner's note: Correct, but the candidate should have said they would also show that overboard discharge is blocked when the alarm trips. Inspectors look for that and for ORB entries that match the tank soundings. See oily water separator.
Interviewer: Your Second Engineer wants to postpone a critical PMS job because the port stay is short. What do you do? Candidate: I ask why and what the risk is. If the equipment is on the critical list, postponement needs a risk assessment and office approval under our SMS. I record the decision and a new date, and I tell the master.
Examiner's note: Good management answer. It shows the ISM link between critical equipment and the PMS. See ISM Code.
Interviewer: Tell me about a time you disagreed with the office. Candidate: The office cut our spares order for generator fuel pumps. I sent running hours and the last two overhaul reports showing worn plungers, and asked for half the order as a minimum. They approved it.
Examiner's note: Short, factual, data-led and respectful. A weak answer complains about the office.
Interviewer: How do you control hours of rest in the engine department during a long port overhaul? Candidate: The minimum is 10 hours of rest in any 24 hours and 77 hours in any 7 days under STCW A-VIII/1. I plan shifts before arrival, check records daily, and if work must exceed that I stop it or use only the exceptions our flag allows, with records[8].
Examiner's note: Strong because it gives the rule and a plan. A weak answer is "the crew do not mind working extra".
Interviewer: The ship's CII rating is falling. What can engineering do? Candidate: Keep the hull and propeller clean, keep the engine tuned, cut generator running hours, use the economiser fully and report fuel data accurately. A ship rated D for three years in a row or E in one year needs a corrective action plan in the SEEMP under MARPOL Annex VI.
Examiner's note: Good. Interviewers check if a Chief Engineer understands that energy efficiency is now a regulatory duty, not only a cost.
Interviewer: Last question. Why should we hire you? Candidate: I ran a clean PSC record on my last two ships, I know this engine type, and I train juniors. I will need two weeks to learn your SMS forms, and I will ask questions early.
Examiner's note: Specific, honest about the learning curve, no exaggeration. Practise your own version with the mock oral drill.
What does a weak STAR answer look like for an engineer, and how do you fix it?
A weak STAR answer is vague, has no numbers, and hides your own action behind "we". The fix is one real event, told in order, with your decision and a result you can prove.
Question: "Tell me about a time you dealt with a serious machinery failure at sea."
Weak version: "We had a blackout once. Everybody worked hard and we fixed it quickly. The chief was happy."
Examiner's note: No ship, no cause, no personal action, no lesson. The interviewer cannot tell if you were in the engine room or asleep.
Fixed version:
| Step | What the candidate says | Why it works |
|---|---|---|
| Situation | "Third Engineer on a container ship, night UMS duty, heavy weather, 300 reefers plugged in. Both running generators tripped and we lost main power." | Rank, time, conditions and load are clear in one breath |
| Task | "I was the duty engineer. I had to restore power and propulsion fast and keep the bridge informed." | States the responsibility, not the team's |
| Action | "The emergency generator came on line as designed. I phoned the bridge, called the Second Engineer, checked the alarm list, found high fuel filter differential pressure on both sets, changed over to the clean filters, started one generator, closed it on the board, then restarted essential pumps in sequence and started the main engine with the bridge's agreement." | Shows a sequence, the root cause and communication. Ties to the emergency generator rule[11] |
| Result | "Power back in about 15 minutes, no reefer loss. We found settling tank sludge after rough weather, so I proposed draining the settling tanks before forecast heavy weather. The chief added it to the standing orders." | Outcome plus a lasting change |
What evidence should a Chief Engineer give for each duty in an interview?
Give one fact from your own ship for each duty: a measurement, a record, a result. The interviewer checks that you ran the system, not just knew its name. The table shows Chief Engineer duties; juniors can adapt it from the rank table above.
| Duty | What the interviewer checks | Evidence to bring up |
|---|---|---|
| Main engine condition | You know the limits and trends, not just the overhaul dates | Last crankshaft deflection readings against limits, cylinder liner wear trend, scavenge inspection findings; see two-stroke main engine |
| Planned maintenance | Critical equipment, postponements, spares | Number of overdue jobs when you joined and when you left; how you handled one postponement |
| MARPOL Annex I records | ORB matches soundings; OWS works; no magic pipes | How you checked ORB entries against tank soundings each week; your 15 ppm alarm certificate date |
| Fuel and bunkering | Quantity, quality and sulphur compliance | A bunker dispute you handled; your changeover time calculation; see bunkering |
| Energy efficiency | SEEMP, CII and fuel reporting | One measure that reduced consumption, with the figure from your own records |
| Safety and permits | Permits, isolation, enclosed spaces | How you ran an enclosed space entry with an 8-hour permit limit[12] |
| People | Rest hours, training, discipline | How you planned an overhaul inside rest-hour limits; a junior you trained to take UMS duty |
| PSC and class | Readiness every day, not only before inspection | Your last PSC result, any deficiency and how you closed it; see port state control |
How should engineers answer ship-type questions on tankers, bulkers, container ships and gas carriers?
Answer with the machinery that ship type has and the safety risk it brings, then one thing you did yourself. The table gives a likely question for each type and what a good answer covers. It adds to the ship-type topics on our topic pages.
| Ship type | Likely question | Key points of a good answer |
|---|---|---|
| Oil or chemical tanker | "How do you keep the inert gas system safe and compliant during discharge?" | Oxygen in the gas supplied kept low and cargo tanks kept at not more than 8% oxygen by volume; oxygen analyser calibrated; deck water seal and non-return devices working; boiler load managed for cargo pumps; alarm and trip tests; records. See tanker operations and CES for tanker officers |
| Bulk carrier | "Ballast passage of three weeks. What engineering work do you plan?" | Ballast water treatment system running and logged; ballast pumps and valves maintained; hatch cover and crane hydraulic checks before loading port; hold bilge system tested; see ballast water management |
| Container ship | "Port with 800 reefers to load. How do you plan power?" | Number of generators online before connection; staged reefer connection; preferential trips set; shaft generator or bow thruster interlocks; load sharing checked; see marine electrical systems |
| Gas carrier or LNG-fuelled ship | "What is different about gas safety in your engine room?" | Gas fuel in double-walled pipes or ventilated ducts with gas detection; automatic shutdown of gas supply on detection or ventilation loss; changeover to fuel oil; boil-off gas handling; only trained staff work on the gas system under IGC or IGF Code principles; see dual-fuel and LNG engines |
Which engineer interview answers are red flags, and what should you say instead?
Answers that suggest you would hide a fault, bypass a safety device or guess on a safety number are the fastest way to fail. The table shows common red-flag answers in the words candidates use, and a better answer.
| Red-flag answer | Why it worries the interviewer | Better answer |
|---|---|---|
| "We sometimes kept the 15 ppm alarm on manual to save time." | Admits a MARPOL Annex I violation that can lead to detention and prosecution | "The OWS only runs with the alarm and automatic stopping device in service. If it fails, we stop discharge, record it in the ORB and report." |
| "I opened the crankcase door to check what was happening." | Fresh air into a hot crankcase can cause an explosion | "I stop or slow the engine, wait for it to cool as the maker requires, then inspect with no naked lights." |
| "The ORB is written by the Second Engineer, I just sign." | Shows no ownership of a legal record | "I check each entry against soundings and the OWS record before I sign." |
| "I do not remember the engine type." | Suggests you did not run the plant | Name maker, model, cylinders and power; if unsure, say what you remember and where to confirm |
| "Rest hours are paperwork." | STCW and MLC breaches cause PSC detentions | "I plan work so rest hours are met and records match reality." |
| "I would fix it myself without telling the bridge." | Bridge may lose power or propulsion without warning | "I tell the bridge first, then act, and update them." |
| "I have never had a problem." | Sounds rehearsed or untrue | Give a real fault and what you learned |
What marine engineer interview questions should you practise?
The 15 questions below are written by us in the style technical superintendents commonly use. They are not taken from any company's interview. Each model answer lists the key points, with the rule or source behind it.
Oral practice
15 oral questions with model answers
Read the question, answer it out loud as if the examiner is across the table, then open the model answer and mark yourself honestly.
- 1
Walk me through how you take over the engine-room watch.
Model answer points
- Arrive early; read the logbook and the chief's night orders
- Check main engine and generator parameters, alarms acknowledged and outstanding
- Check levels: bilges, sumps, service and settling tanks, expansion tanks
- Check purifiers, boiler, steering gear and running machinery by walk-round
- Ask about any work in progress, isolations and permits
- Do not take over during a manoeuvre or emergency until it is finished
The examiner may follow up with- When would you refuse to take over?
How did you do? - 2
The purifier keeps losing its water seal. What could be the causes?
Model answer points
- Wrong gravity disc for the oil density
- Oil temperature too high or too low
- Feed rate too high
- Seal or operating water supply fault, low pressure
- Bowl not closing properly (worn seals, dirt)
- Sludge discharge timing wrong
- Check against the manufacturer's manual
The examiner may follow up with- Purifier vs clarifier: what is the difference?
How did you do? - 3
How do you pump out machinery-space bilges legally?
Model answer points
- Only through the oily water separator approved under MARPOL
- Ship en route; oil content not more than 15 ppm
- Not in the Antarctic area
- 15 ppm alarm and stopping arrangement working where required
- Record in Oil Record Book Part I (date, time, position, quantity)
- Otherwise keep on board or discharge to reception facilities
The examiner may follow up with- What is a 'magic pipe' and why is it criminal?
How did you do? - 4
Explain the fuel changeover before entering an ECA.
Model answer points
- Plan with the written changeover procedure
- Calculate time to flush the system so only 0.10% m/m fuel is used on entry
- Watch viscosity and temperature; avoid thermal shock to fuel pumps
- Record date, time, ship position and volume of compliant fuel in each tank in the logbook
- Keep bunker delivery notes and samples
The examiner may follow up with- What problems can low-sulphur fuel cause?
How did you do? - 5
What documents and samples do you handle during bunkering?
Model answer points
- Bunker plan, checklist and communication with the barge
- Check soundings before and after; watch overflow risk
- Bunker delivery note: retained on board for three years
- MARPOL sample: kept until the fuel is substantially consumed and not less than 12 months
- Supplier's flashpoint declaration (SOLAS from 1 January 2026)
- Report any off-spec or short delivery to the chief and office
The examiner may follow up with- How is the MARPOL sample taken?
How did you do? - 6
You suspect a scavenge fire. What are the signs and your actions?
Model answer points
- Signs: high exhaust temperature on one unit, high scavenge air temperature, smoke or sparks from scavenge drains, turbocharger surging
- Inform the bridge and reduce engine load
- Cut off fuel to the affected unit if possible; increase cylinder lube oil
- Keep scavenge drains closed if fire is active
- If the fire spreads, stop the engine and use the fixed scavenge fire system
- Inspect only after cool-down; find the cause (blow-by, oil in scavenge)
The examiner may follow up with- What causes scavenge fires?
How did you do? - 7
The crankcase oil mist detector alarms. What do you do?
Model answer points
- Treat it as a risk of crankcase explosion
- Inform the bridge and reduce speed or stop as per maker's instructions
- Keep people away from crankcase doors and relief valves
- Do not open the crankcase until the engine has cooled for the time the maker gives
- Find the hot spot: bearings, piston rod stuffing box, chain drive
- Do not restart until the cause is found and fixed
The examiner may follow up with- Why is opening the door early dangerous?
How did you do? - 8
Boiler water level drops below the gauge glass. What do you do?
Model answer points
- Shut off the fuel to the burner at once
- Do not feed water to a boiler with an unknown low level; it may be overheated
- Close the steam stop if needed and inform the chief
- Let the boiler cool; find the cause (feed pump, controls, tube leak)
- Inspect for damage before relighting
- Confirm level by blowing down the gauge glass correctly
The examiner may follow up with- How do you blow down a gauge glass?
How did you do? - 9
Blackout at sea. What are your actions?
Model answer points
- Inform the bridge; the emergency generator should start and supply emergency loads within 45 seconds
- Find the cause before restarting (fuel, overload, trip)
- Start a standby generator and close it onto the main switchboard
- Restore essential services in order: steering, lubrication, cooling, fuel, then main engine
- Check preferential trips reset
- Record and report
The examiner may follow up with- What is a preferential trip?
How did you do? - 10
What are the SOLAS steering gear performance and testing requirements?
Model answer points
- Main gear: 35 degrees one side to 35 degrees other at max ahead service speed and deepest draught
- 35 degrees either side to 30 degrees other in not more than 28 seconds
- Auxiliary gear: 15 degrees one side to 15 degrees other in not more than 60 seconds at half max speed or 7 knots, whichever is greater
- Checks and tests within 12 hours before departure
- Emergency steering drills at least every three months
The examiner may follow up with- How do you change over to emergency steering?
How did you do? - 11
How do you isolate equipment safely before maintenance?
Model answer points
- Permit to work and risk assessment
- Isolate electrical supply at the breaker, lock and tag it
- Isolate mechanical energy: valves closed and locked, pressure released, drained
- Test for dead or zero energy before work
- Tell the bridge or watch engineer what is isolated
- Remove locks only when work is complete and everyone is clear
The examiner may follow up with- Who keeps the key?
How did you do? - 12
What makes an engine room suitable for unattended (UMS) operation?
Model answer points
- Alarm system covering all essential machinery, relayed to the bridge and engineers' cabins
- Fire detection in machinery spaces
- Bridge control of propulsion with emergency stop
- Automatic start of standby pumps and generators
- Bilge high level alarms
- Engineer-on-duty alarm and dead-man system
The examiner may follow up with- What checks do you do before leaving the engine room UMS?
How did you do? - 13
How do you plan maintenance as Second Engineer?
Model answer points
- Follow the planned maintenance system: running hours, calendar and condition-based tasks
- Prioritise critical equipment under the SMS
- Plan around port stays, spares and manpower
- Respect hours of rest for the team
- Record work and spares used; update running hours
- Report overdue jobs and the reason to the chief
The examiner may follow up with- What is condition-based maintenance?
How did you do? - 14
As Chief Engineer, PSC finds the OWS 15 ppm alarm not working. What now?
Model answer points
- Stop any bilge discharge at once
- Inform the master and the company
- Find the cause and repair or replace; get a service engineer if needed
- Retain bilge water on board meanwhile
- Record in the Oil Record Book
- Investigate through the SMS: why the defect was not found earlier
The examiner may follow up with- What can lead to detention under Annex I?
How did you do? - 15
Fire is reported in the purifier room. Your actions?
Model answer points
- Raise the alarm and inform the bridge
- Stop fuel supply with remote quick-closing valves; stop purifiers and fans
- Account for all persons
- Attack with portable equipment only if small and safe
- If not controllable, evacuate, close the space and prepare the fixed system on master's order
- Boundary cooling and keep the space closed after release
The examiner may follow up with- What must you check before releasing CO2?
How did you do?
Reading answers is not the same as saying them. Our AI voice examiner asks these out loud, listens to your answer, asks the follow-up and marks you against the rule. Join early access or try the free timed mock oral drill.
Frequently asked questions
Who interviews marine engineers in a shipping company?
Usually a technical superintendent or fleet manager, often an ex-chief engineer, or a serving chief engineer. ETOs may meet an electrical superintendent.
Do they ask about the exact engine make?
Often, yes. Be ready to name the makes and models you have sailed with and describe jobs you did on them.
What is the OWS discharge limit?
Oil content must not exceed 15 ppm, with the ship en route and through approved equipment, under MARPOL Annex I Reg. 15. Every operation is recorded in the Oil Record Book.
What are the fuel sulphur limits now?
0.50% m/m outside emission control areas and 0.10% m/m inside them, since 1 January 2020, unless an approved scrubber is used.
Will a Fourth Engineer be asked about the main engine?
Yes, at a basic level: the working cycle, main systems and watchkeeping checks. Deep overhaul questions are more for Second Engineers.
What emergency questions are most common?
Blackout recovery, engine-room fire, scavenge fire, crankcase oil mist, flooding and steering failure.
Is the CES test harder for engineers or deck officers?
Neither in general; the test matches your department, rank and ship type. See CES for engineers.
Do companies test ETOs differently?
Yes, they focus on power management, automation, high voltage safety and fault finding, plus general engine-room safety.
What if I have only sailed on one engine type?
Say so and explain what you know about the company's type. Show willingness to learn; companies often provide engine-maker courses.
How long should my answers be?
About 30 to 90 seconds: action, reason, rule. Stop and let the interviewer ask more.
Do they check the Oil Record Book knowledge?
Yes, often in detail. Know which operations need entries, who signs, and how PSC checks it against sounding records and the OWS.
Do engineers get asked about COLREGs or navigation?
Rarely in depth. You may be asked about bridge communication, manoeuvring orders and what the engine room must do when the bridge calls for emergency full astern.
Will they ask about scrubbers or LNG fuel?
If the company runs ships with scrubbers or dual-fuel engines, yes. Know the basic principle, the main safety hazards and the records you keep. See fuel sulphur rules and scrubbers.
How can I practise engine interview questions?
Answer aloud using the questions below, then use our mock oral drill and join early access for our AI voice examiner.
Sources 12 documents
Each number in the text links to the source below. Labels show the type of source; see our editorial policy.
- Reported OneOcean: CES as a maritime recruitment and onboarding tool · 20 December 2024
- Reported Marlins support: minimum recommended TOSE results by rank
- Official IMO: IMO 2020 – cutting sulphur oxide emissions
- Official IMO Resolution MEPC.305(73) · 26 October 2018
- Official REMPEC: Effective application of the Med SOx Emission Control Area under MARPOL Annex VI · 1 May 2025
- Official IMO: Amendments to IMO instruments - upcoming and recent entry into force dates
- Official IMO press briefing: CII and EEXI entry into force · 1 November 2022
- Official MCA MGN 566 (M+F) – STCW Manila Amendments: medical certification, hours of work and alcohol limits · 1 February 2017
- Official REMPEC (IMO/UNEP Regional Centre), MARPOL Annex VI regulations, national workshop presentation, 26 November 2020 · 26 November 2020
- Official IMO Resolution MEPC.285(70), Amendments to MEPC.107(49) para 4.2.11 · 28 October 2016
- Official Isle of Man SD 603/98 Merchant Shipping (Cargo Ship Construction) Regulations 1998, Schedule 10 (transposing SOLAS Ch. II-1 Reg. 43) · 1 January 1998
- Official IMO Resolution MSC.581(110) Revised recommendations for entering enclosed spaces aboard ships · 27 June 2025